House wrap is a weather-resistive barrier installed over wall sheathing and under siding. It blocks liquid water and air infiltration while allowing water vapor to escape, protecting the wall cavity from moisture damage.
Unit Price
$0.15
per sq ft
Labor Cost
$0.20
per sq ft
Durability
30
years lifespan
Sustainability
3/5
Average
Category: Siding
Range: $0.08 – $0.25/sq ft
Waste Factor: 10%
Avg Project: $600
Quick answer: House Wrap cost in 2026
House Wrap costs about $0.15 per sq ft (typical range $0.08–$0.25) plus roughly $0.20 per sq ft for installation labor, or about $0.35 per sq ft installed. Order 10% extra for waste: 500 sq fts becomes 550 sq fts, about $83 in material and $183 installed. HammerIO planning estimates, a national baseline adjusted by regional factors on city and state pages.
Labor is priced by carpenters: the BLS OEWS May 2025 median wage is $29.12/hr nationally, $35.72 in New York and $23.44 in Dallas. Last reviewed .
Estimate House Wrap (WRB) Cost Before You Order or Compare Bids
Step 1
Price House Wrap (WRB) by the right unit
Start with the measured quantity in sq fts, then compare the current unit range of $0.08 to $0.25 per sq ft.
Step 2
Add waste, labor, and install accessories
Apply the default 10% waste factor, then include labor, fasteners, trim, adhesives, delivery, rental tools, and other project-specific accessories.
Step 3
Use the result to check written bids
Compare the calculator result against supplier units and contractor line items, then verify code, permit, and site-condition assumptions before ordering.
Contractor Takeoff Notes
How to Budget House Wrap (WRB) Without Missing Hidden Costs
House Wrap (WRB) should be budgeted as a complete installed assembly, not only as a commodity unit price. Quantity, waste, labor, local supply, code requirements, and the accessories needed for installation drive the final project cost.
$39
sample total for 111 sq fts
Price drivers
+Unit price ranges from $0.08 to $0.25 per sq ft, with $0.15 as the national midpoint used in this calculator.
+Labor is modeled at $0.20 per sq ft, but local contractor rates and project access can move that number sharply.
+The default 10% waste factor covers typical cuts and field losses; complex layouts need a larger buffer.
Ordering checks
+Measure the installed quantity in sq fts before adding waste or accessories.
+Confirm grade, thickness, profile, warranty, and code requirements before comparing quotes.
Cost/Year = unit price divided by expected lifespan. Lower cost/year indicates better long-term value. Note: units may differ between materials.
Best Uses
Under siding
New construction
Residing projects
Air infiltration reduction
Material Details
Average Project Cost
$600
Typical project using this material
Sustainability Rating
Average, moderate environmental impact
Waste Factor
10%
Order 10% extra to account for cuts, breakage, and fitting
House Wrap (WRB): Complete Buying Guide 2026
House wrap is a weather-resistive barrier installed over wall sheathing and under siding. It blocks liquid water and air infiltration while allowing water vapor to escape, protecting the wall cavity from moisture damage. In 2026, house wrap (wrb) prices average $0.15 per sq ft, with a typical range of $0.08 to $0.25 depending on your region, supplier relationships, and order quantity.
When budgeting for a project using house wrap (wrb), factor in approximately 10% additional material for waste, plus labor costs averaging $0.20 per sq ft for professional installation. A typical project using this material runs approximately $600 including both materials and labor.
With an expected lifespan of 30 years, house wrap (wrb) represents a cost of approximately $0.01 per sq ft per year of service life. This solid lifespan provides good value for most residential and commercial applications.
For searchers comparing bids, the key number is not only the shelf price. The installed cost for house wrap (wrb) depends on accessory materials, waste, job access, minimum order size, delivery, regional labor rates, and whether the project needs permit or code-driven upgrades. This page combines the HammerIO material database with 2026 cost modeling, contractor takeoff assumptions, and public construction cost references.
Computed from this page's planning figures: material = quantity × (1 + 10% waste) × unit price; labor = quantity × $0.20 per sq ft. Delivery, fasteners, adhesives, rental tools and permits are extra.
Quantity needed
Order (+10% waste)
Material (low – typical – high)
Labor allowance
Installed (typical)
100 sq fts
111 sq fts
$9 – $17 – $28
$20
$37
500 sq fts
550 sq fts
$44 – $83 – $138
$100
$183
1,000 sq fts
1,100 sq fts
$88 – $165 – $275
$200
$365
HammerIO planning estimates (national baseline adjusted by regional factors). Verify permit requirements with your local building department.
Who Installs House Wrap: Carpenters Wages in the 10 Largest Metros
The $0.20 per sq ft labor allowance is a national figure. To localize it, compare your metro's median wage for carpenters with the U.S. median below and scale the allowance by the same ratio.
Carpenters: median hourly wage, 10 largest U.S. metros vs. national (BLS OEWS May 2025)
Metro area
Median wage
vs. U.S. median
United States
$29.12/hr
baseline
New York, NY-NJ
$35.72/hr
+23%
Los Angeles, CA
$36.41/hr
+25%
Chicago, IL-IN
$38.68/hr
+33%
Dallas, TX
$23.44/hr
-20%
Houston, TX
$23.88/hr
-18%
Washington, DC-VA-MD-WV
$29.23/hr
at U.S. median
Miami, FL
$24.79/hr
-15%
Philadelphia, PA-NJ-DE-MD
$29.70/hr
+2%
Atlanta, GA
$24.37/hr
-16%
Phoenix, AZ
$29.00/hr
at U.S. median
Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (May 2025), median hourly wages. These are employee wages, not contractor billing rates, a contractor's quoted hourly rate adds overhead, insurance, equipment and profit on top of the wage. “, ” means BLS did not publish a metro estimate for that occupation. Occupation: Carpenters (SOC 47-2031).
Chicago, IL-IN carpenters earn a median $38.68/hr (+33% vs. the $29.12 U.S. median) while Dallas, TX is $23.44/hr (-20%). For a 500-sq ft job that moves the $100 national labor allowance to roughly $80 in Dallas, TX and $133 in Chicago, IL-IN, before contractor overhead and profit. See the state construction cost pages for statewide figures.
Methodology & Data Sources: House Wrap (WRB) Cost Data
How we calculate House Wrap (WRB) costs: Our pricing model combines the HammerIO material database (planning estimates, a national baseline adjusted by regional factors on city and state pages), U.S. Bureau of Labor Statistics OEWS May 2025 trade wages for the labor allowance, EPA Environmentally Preferable Purchasing guidance for sustainability ratings, DOE Building Technologies Office benchmarks for energy-related materials, and contractor takeoff assumptions. Unit prices are reviewed quarterly and cross-checked against common supplier ranges where available.
Unit price ($0.15/sq ft): National midpoint estimate for mid-market grade materials sourced through standard supply channels.
Average project cost ($600): Derived from material quantity, labor allowance, waste, and typical residential/light commercial installation assumptions.
Waste factor (10%): Per NAHB (National Association of Home Builders) construction waste estimation guidelines, accounting for cuts, breakage, and field adjustments.
Durability (30 years): HammerIO planning estimate based on typical manufacturer warranty periods and expected service life for the material class under normal residential use.
Sustainability rating (3/5): Composite score from EPA Environmentally Preferable Purchasing criteria, including embodied carbon, recyclability, and VOC emissions per LEED v4.1 thresholds.
Disclaimer: Construction material prices vary significantly by region, supplier, project volume, and market conditions. The figures shown represent national averages and should be used for budgeting and comparison purposes only. Always obtain local contractor quotes before committing to a project budget.
Reviewed by Rowan Ashby · Last updated September 17, 2026 · Pricing sourced from the HammerIO 2026 material database (planning estimates), BLS OEWS May 2025 trade wages, public agency guidance, and contractor takeoff assumptions
Explore All 156 Construction Materials
Compare prices, specs, and sustainability ratings across lumber, concrete, steel, roofing, insulation, flooring, and more.
House Wrap (WRB) costs an average of $0.15 per sq ft in 2026. Prices range from $0.08 to $0.25 per sq ft depending on your location, supplier, and quantity purchased. A typical project using house wrap (wrb) costs approximately $600.
How long does house wrap (wrb) last?
House Wrap (WRB) has an expected lifespan of approximately 30 years when properly installed and maintained. Actual durability depends on climate exposure, installation quality, and maintenance practices. This provides good long-term value for most residential applications.
What is house wrap (wrb) used for?
House Wrap (WRB) is commonly used for Under siding, New construction, Residing projects, Air infiltration reduction. It falls in the Siding category of construction materials. House wrap is a weather-resistive barrier installed over wall sheathing and under siding. It blocks liquid water and air infiltration while allowing water vapor to escape, protecting the wall cavity from moisture damage.
How much waste should I plan for with house wrap (wrb)?
Plan for approximately 10% waste when ordering house wrap (wrb). For a project requiring 100 sq fts of material, you should order 111 sq fts to account for cuts, breakage, and fitting. Waste factors vary by project complexity and installer experience.
What are alternatives to house wrap (wrb)?
Common alternatives to House Wrap (WRB) include ZIP System Sheathing. Each alternative offers different trade-offs in terms of cost, durability, and performance. ZIP System Sheathing costs $1.40 per sq ft and lasts approximately 50 years.
Is house wrap (wrb) sustainable?
House Wrap (WRB) has a sustainability rating of 3 out of 5 (Average). This material has an average environmental impact. Consider locally sourced options when available to reduce transportation-related emissions.
How much does 500 sq fts of house wrap cost installed?
Ordering 500 sq fts with the 10% waste factor means buying 550 sq fts: about $83 in material at the $0.15 planning price (range $44–$138), plus roughly $100 in installation labor at the $0.20 per sq ft allowance, about $183 total before delivery, fasteners, adhesives and permits. These are HammerIO planning estimates (national baseline); regional factors and supplier quotes move the final number.
Who installs house wrap and what do they earn per hour in 2026?
House Wrap is typically installed by carpenters. The U.S. Bureau of Labor Statistics (OEWS, May 2025) reports a national median wage of $29.12 per hour for Carpenters, ranging from $23.44 in Dallas, TX to $38.68 in Chicago, IL-IN among the ten largest metros. Contractor billing rates run higher than the wage because they include overhead, insurance, equipment and profit, so use the metro-to-national ratio, not the wage itself, to adjust the labor allowance on this page.