Entry door locksets combine a locking mechanism with a handle or knob for exterior doors. Grade 2 residential locks provide adequate security for most homes, while Grade 1 commercial-grade locks offer maximum durability.
Unit Price
$45.00
per each
Labor Cost
$60.00
per each
Durability
20
years lifespan
Sustainability
3/5
Average
Category: Hardware
Range: $20.00 – $150.00/each
Waste Factor: 0%
Avg Project: $200
Quick answer: Door Lockset cost in 2026
Door Lockset costs about $45.00 per each (typical range $20.00–$150.00) plus roughly $60.00 per each for installation labor, or about $105.00 per each installed. Order 0% extra for waste: 500 eachs becomes 500 eachs, about $22,500 in material and $52,500 installed. HammerIO planning estimates, a national baseline adjusted by regional factors on city and state pages.
Labor is priced by carpenters: the BLS OEWS May 2025 median wage is $29.12/hr nationally, $35.72 in New York and $23.44 in Dallas. Last reviewed .
Estimate Door Lockset (Entry) Cost Before You Order or Compare Bids
Step 1
Price Door Lockset (Entry) by the right unit
Start with the measured quantity in eachs, then compare the current unit range of $20.00 to $150.00 per each.
Step 2
Add waste, labor, and install accessories
Apply the default 0% waste factor, then include labor, fasteners, trim, adhesives, delivery, rental tools, and other project-specific accessories.
Step 3
Use the result to check written bids
Compare the calculator result against supplier units and contractor line items, then verify code, permit, and site-condition assumptions before ordering.
Contractor Takeoff Notes
How to Budget Door Lockset (Entry) Without Missing Hidden Costs
Door Lockset (Entry) should be budgeted as a complete installed assembly, not only as a commodity unit price. Quantity, waste, labor, local supply, code requirements, and the accessories needed for installation drive the final project cost.
$10,500
sample total for 100 eachs
Price drivers
+Unit price ranges from $20.00 to $150.00 per each, with $45.00 as the national midpoint used in this calculator.
+Labor is modeled at $60.00 per each, but local contractor rates and project access can move that number sharply.
+The default 0% waste factor covers typical cuts and field losses; complex layouts need a larger buffer.
Ordering checks
+Measure the installed quantity in eachs before adding waste or accessories.
+Confirm grade, thickness, profile, warranty, and code requirements before comparing quotes.
Based on 100 eachs at $45.00/each + $60.00/each labor. Actual costs vary by location and supplier.
Specifications
GradeGrade 2 (residential)
TypeHandleset or knob/lever
FinishSatin nickel, oil-rubbed bronze, etc.
KeyingKeyed entry or keypad
Best Uses
Front door
Back door
Garage entry
Side door
Material Details
Average Project Cost
$200
Typical project using this material
Sustainability Rating
Average, moderate environmental impact
Waste Factor
0%
Order 0% extra to account for cuts, breakage, and fitting
Door Lockset (Entry): Complete Buying Guide 2026
Entry door locksets combine a locking mechanism with a handle or knob for exterior doors. Grade 2 residential locks provide adequate security for most homes, while Grade 1 commercial-grade locks offer maximum durability. In 2026, door lockset (entry) prices average $45.00 per each, with a typical range of $20.00 to $150.00 depending on your region, supplier relationships, and order quantity.
When budgeting for a project using door lockset (entry), factor in approximately 0% additional material for waste, plus labor costs averaging $60.00 per each for professional installation. A typical project using this material runs approximately $200 including both materials and labor.
With an expected lifespan of 20 years, door lockset (entry) represents a cost of approximately $2.25 per each per year of service life. While the initial cost is competitive, budget for eventual replacement or refinishing.
For searchers comparing bids, the key number is not only the shelf price. The installed cost for door lockset (entry) depends on accessory materials, waste, job access, minimum order size, delivery, regional labor rates, and whether the project needs permit or code-driven upgrades. This page combines the HammerIO material database with 2026 cost modeling, contractor takeoff assumptions, and public construction cost references.
Computed from this page's planning figures: material = quantity × (1 + 0% waste) × unit price; labor = quantity × $60.00 per each. Delivery, fasteners, adhesives, rental tools and permits are extra.
Quantity needed
Order (+0% waste)
Material (low – typical – high)
Labor allowance
Installed (typical)
100 eachs
100 eachs
$2,000 – $4,500 – $15,000
$6,000
$10,500
500 eachs
500 eachs
$10,000 – $22,500 – $75,000
$30,000
$52,500
1,000 eachs
1,000 eachs
$20,000 – $45,000 – $150,000
$60,000
$105,000
HammerIO planning estimates (national baseline adjusted by regional factors). Verify permit requirements with your local building department.
Who Installs Door Lockset: Carpenters Wages in the 10 Largest Metros
The $60.00 per each labor allowance is a national figure. To localize it, compare your metro's median wage for carpenters with the U.S. median below and scale the allowance by the same ratio.
Carpenters: median hourly wage, 10 largest U.S. metros vs. national (BLS OEWS May 2025)
Metro area
Median wage
vs. U.S. median
United States
$29.12/hr
baseline
New York, NY-NJ
$35.72/hr
+23%
Los Angeles, CA
$36.41/hr
+25%
Chicago, IL-IN
$38.68/hr
+33%
Dallas, TX
$23.44/hr
-20%
Houston, TX
$23.88/hr
-18%
Washington, DC-VA-MD-WV
$29.23/hr
at U.S. median
Miami, FL
$24.79/hr
-15%
Philadelphia, PA-NJ-DE-MD
$29.70/hr
+2%
Atlanta, GA
$24.37/hr
-16%
Phoenix, AZ
$29.00/hr
at U.S. median
Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (May 2025), median hourly wages. These are employee wages, not contractor billing rates, a contractor's quoted hourly rate adds overhead, insurance, equipment and profit on top of the wage. “, ” means BLS did not publish a metro estimate for that occupation. Occupation: Carpenters (SOC 47-2031).
Chicago, IL-IN carpenters earn a median $38.68/hr (+33% vs. the $29.12 U.S. median) while Dallas, TX is $23.44/hr (-20%). For a 500-each job that moves the $30,000 national labor allowance to roughly $24,148 in Dallas, TX and $39,849 in Chicago, IL-IN, before contractor overhead and profit. See the state construction cost pages for statewide figures.
Methodology & Data Sources: Door Lockset (Entry) Cost Data
How we calculate Door Lockset (Entry) costs: Our pricing model combines the HammerIO material database (planning estimates, a national baseline adjusted by regional factors on city and state pages), U.S. Bureau of Labor Statistics OEWS May 2025 trade wages for the labor allowance, EPA Environmentally Preferable Purchasing guidance for sustainability ratings, DOE Building Technologies Office benchmarks for energy-related materials, and contractor takeoff assumptions. Unit prices are reviewed quarterly and cross-checked against common supplier ranges where available.
Unit price ($45.00/each): National midpoint estimate for mid-market grade materials sourced through standard supply channels.
Average project cost ($200): Derived from material quantity, labor allowance, waste, and typical residential/light commercial installation assumptions.
Waste factor (0%): Per NAHB (National Association of Home Builders) construction waste estimation guidelines, accounting for cuts, breakage, and field adjustments.
Durability (20 years): HammerIO planning estimate based on typical manufacturer warranty periods and expected service life for the material class under normal residential use.
Sustainability rating (3/5): Composite score from EPA Environmentally Preferable Purchasing criteria, including embodied carbon, recyclability, and VOC emissions per LEED v4.1 thresholds.
Disclaimer: Construction material prices vary significantly by region, supplier, project volume, and market conditions. The figures shown represent national averages and should be used for budgeting and comparison purposes only. Always obtain local contractor quotes before committing to a project budget.
Reviewed by Rowan Ashby · Last updated September 17, 2026 · Pricing sourced from the HammerIO 2026 material database (planning estimates), BLS OEWS May 2025 trade wages, public agency guidance, and contractor takeoff assumptions
Explore All 156 Construction Materials
Compare prices, specs, and sustainability ratings across lumber, concrete, steel, roofing, insulation, flooring, and more.
Door Lockset (Entry) costs an average of $45.00 per each in 2026. Prices range from $20.00 to $150.00 per each depending on your location, supplier, and quantity purchased. A typical project using door lockset (entry) costs approximately $200.
How long does door lockset (entry) last?
Door Lockset (Entry) has an expected lifespan of approximately 20 years when properly installed and maintained. Actual durability depends on climate exposure, installation quality, and maintenance practices. Plan for periodic replacement or maintenance to maximize its useful life.
What is door lockset (entry) used for?
Door Lockset (Entry) is commonly used for Front door, Back door, Garage entry, Side door. It falls in the Hardware category of construction materials. Entry door locksets combine a locking mechanism with a handle or knob for exterior doors. Grade 2 residential locks provide adequate security for most homes, while Grade 1 commercial-grade locks offer maximum durability.
How much waste should I plan for with door lockset (entry)?
Plan for approximately 0% waste when ordering door lockset (entry). For a project requiring 100 eachs of material, you should order 100 eachs to account for cuts, breakage, and fitting. Waste factors vary by project complexity and installer experience.
What are alternatives to door lockset (entry)?
There are limited direct alternatives to Door Lockset (Entry). It is a specialized material in the Hardware category. Consult with a contractor for suitable substitutions based on your specific project requirements.
Is door lockset (entry) sustainable?
Door Lockset (Entry) has a sustainability rating of 3 out of 5 (Average). This material has an average environmental impact. Consider locally sourced options when available to reduce transportation-related emissions.
How much does 500 eachs of door lockset cost installed?
Ordering 500 eachs with the 0% waste factor means buying 500 eachs: about $22,500 in material at the $45.00 planning price (range $10,000–$75,000), plus roughly $30,000 in installation labor at the $60.00 per each allowance, about $52,500 total before delivery, fasteners, adhesives and permits. These are HammerIO planning estimates (national baseline); regional factors and supplier quotes move the final number.
Who installs door lockset and what do they earn per hour in 2026?
Door Lockset is typically installed by carpenters. The U.S. Bureau of Labor Statistics (OEWS, May 2025) reports a national median wage of $29.12 per hour for Carpenters, ranging from $23.44 in Dallas, TX to $38.68 in Chicago, IL-IN among the ten largest metros. Contractor billing rates run higher than the wage because they include overhead, insurance, equipment and profit, so use the metro-to-national ratio, not the wage itself, to adjust the labor allowance on this page.