Cabinet pulls and knobs are the finishing touch on kitchen and bathroom cabinets. Replacing outdated hardware is one of the most affordable ways to dramatically update the look of a kitchen or bathroom.
Unit Price
$5.00
per each
Labor Cost
$3.00
per each
Durability
20
years lifespan
Sustainability
3/5
Average
Category: Hardware
Range: $1.50 – $15.00/each
Waste Factor: 0%
Avg Project: $250
Quick answer: Cabinet Pulls and Knobs cost in 2026
Cabinet Pulls and Knobs costs about $5.00 per each (typical range $1.50–$15.00) plus roughly $3.00 per each for installation labor, or about $8.00 per each installed. Order 0% extra for waste: 500 eachs becomes 500 eachs, about $2,500 in material and $4,000 installed. HammerIO planning estimates, a national baseline adjusted by regional factors on city and state pages.
Labor is priced by carpenters: the BLS OEWS May 2025 median wage is $29.12/hr nationally, $35.72 in New York and $23.44 in Dallas. Last reviewed .
Estimate Cabinet Pulls and Knobs Cost Before You Order or Compare Bids
Step 1
Price Cabinet Pulls and Knobs by the right unit
Start with the measured quantity in eachs, then compare the current unit range of $1.50 to $15.00 per each.
Step 2
Add waste, labor, and install accessories
Apply the default 0% waste factor, then include labor, fasteners, trim, adhesives, delivery, rental tools, and other project-specific accessories.
Step 3
Use the result to check written bids
Compare the calculator result against supplier units and contractor line items, then verify code, permit, and site-condition assumptions before ordering.
Contractor Takeoff Notes
How to Budget Cabinet Pulls and Knobs Without Missing Hidden Costs
Cabinet Pulls and Knobs should be budgeted as a complete installed assembly, not only as a commodity unit price. Quantity, waste, labor, local supply, code requirements, and the accessories needed for installation drive the final project cost.
$800
sample total for 100 eachs
Price drivers
+Unit price ranges from $1.50 to $15.00 per each, with $5.00 as the national midpoint used in this calculator.
+Labor is modeled at $3.00 per each, but local contractor rates and project access can move that number sharply.
+The default 0% waste factor covers typical cuts and field losses; complex layouts need a larger buffer.
Ordering checks
+Measure the installed quantity in eachs before adding waste or accessories.
+Confirm grade, thickness, profile, warranty, and code requirements before comparing quotes.
Cost/Year = unit price divided by expected lifespan. Lower cost/year indicates better long-term value. Note: units may differ between materials.
Best Uses
Kitchen cabinets
Bathroom vanities
Dressers
Closet doors
Material Details
Average Project Cost
$250
Typical project using this material
Sustainability Rating
Average, moderate environmental impact
Waste Factor
0%
Order 0% extra to account for cuts, breakage, and fitting
Cabinet Pulls and Knobs: Complete Buying Guide 2026
Cabinet pulls and knobs are the finishing touch on kitchen and bathroom cabinets. Replacing outdated hardware is one of the most affordable ways to dramatically update the look of a kitchen or bathroom. In 2026, cabinet pulls and knobs prices average $5.00 per each, with a typical range of $1.50 to $15.00 depending on your region, supplier relationships, and order quantity.
When budgeting for a project using cabinet pulls and knobs, factor in approximately 0% additional material for waste, plus labor costs averaging $3.00 per each for professional installation. A typical project using this material runs approximately $250 including both materials and labor.
With an expected lifespan of 20 years, cabinet pulls and knobs represents a cost of approximately $0.25 per each per year of service life. While the initial cost is competitive, budget for eventual replacement or refinishing.
For searchers comparing bids, the key number is not only the shelf price. The installed cost for cabinet pulls and knobs depends on accessory materials, waste, job access, minimum order size, delivery, regional labor rates, and whether the project needs permit or code-driven upgrades. This page combines the HammerIO material database with 2026 cost modeling, contractor takeoff assumptions, and public construction cost references.
Computed from this page's planning figures: material = quantity × (1 + 0% waste) × unit price; labor = quantity × $3.00 per each. Delivery, fasteners, adhesives, rental tools and permits are extra.
Quantity needed
Order (+0% waste)
Material (low – typical – high)
Labor allowance
Installed (typical)
100 eachs
100 eachs
$150 – $500 – $1,500
$300
$800
500 eachs
500 eachs
$750 – $2,500 – $7,500
$1,500
$4,000
1,000 eachs
1,000 eachs
$1,500 – $5,000 – $15,000
$3,000
$8,000
HammerIO planning estimates (national baseline adjusted by regional factors). Verify permit requirements with your local building department.
Who Installs Cabinet Pulls and Knobs: Carpenters Wages in the 10 Largest Metros
The $3.00 per each labor allowance is a national figure. To localize it, compare your metro's median wage for carpenters with the U.S. median below and scale the allowance by the same ratio.
Carpenters: median hourly wage, 10 largest U.S. metros vs. national (BLS OEWS May 2025)
Metro area
Median wage
vs. U.S. median
United States
$29.12/hr
baseline
New York, NY-NJ
$35.72/hr
+23%
Los Angeles, CA
$36.41/hr
+25%
Chicago, IL-IN
$38.68/hr
+33%
Dallas, TX
$23.44/hr
-20%
Houston, TX
$23.88/hr
-18%
Washington, DC-VA-MD-WV
$29.23/hr
at U.S. median
Miami, FL
$24.79/hr
-15%
Philadelphia, PA-NJ-DE-MD
$29.70/hr
+2%
Atlanta, GA
$24.37/hr
-16%
Phoenix, AZ
$29.00/hr
at U.S. median
Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (May 2025), median hourly wages. These are employee wages, not contractor billing rates, a contractor's quoted hourly rate adds overhead, insurance, equipment and profit on top of the wage. “, ” means BLS did not publish a metro estimate for that occupation. Occupation: Carpenters (SOC 47-2031).
Chicago, IL-IN carpenters earn a median $38.68/hr (+33% vs. the $29.12 U.S. median) while Dallas, TX is $23.44/hr (-20%). For a 500-each job that moves the $1,500 national labor allowance to roughly $1,207 in Dallas, TX and $1,992 in Chicago, IL-IN, before contractor overhead and profit. See the state construction cost pages for statewide figures.
Methodology & Data Sources: Cabinet Pulls and Knobs Cost Data
How we calculate Cabinet Pulls and Knobs costs: Our pricing model combines the HammerIO material database (planning estimates, a national baseline adjusted by regional factors on city and state pages), U.S. Bureau of Labor Statistics OEWS May 2025 trade wages for the labor allowance, EPA Environmentally Preferable Purchasing guidance for sustainability ratings, DOE Building Technologies Office benchmarks for energy-related materials, and contractor takeoff assumptions. Unit prices are reviewed quarterly and cross-checked against common supplier ranges where available.
Unit price ($5.00/each): National midpoint estimate for mid-market grade materials sourced through standard supply channels.
Average project cost ($250): Derived from material quantity, labor allowance, waste, and typical residential/light commercial installation assumptions.
Waste factor (0%): Per NAHB (National Association of Home Builders) construction waste estimation guidelines, accounting for cuts, breakage, and field adjustments.
Durability (20 years): HammerIO planning estimate based on typical manufacturer warranty periods and expected service life for the material class under normal residential use.
Sustainability rating (3/5): Composite score from EPA Environmentally Preferable Purchasing criteria, including embodied carbon, recyclability, and VOC emissions per LEED v4.1 thresholds.
Disclaimer: Construction material prices vary significantly by region, supplier, project volume, and market conditions. The figures shown represent national averages and should be used for budgeting and comparison purposes only. Always obtain local contractor quotes before committing to a project budget.
Reviewed by Rowan Ashby · Last updated September 17, 2026 · Pricing sourced from the HammerIO 2026 material database (planning estimates), BLS OEWS May 2025 trade wages, public agency guidance, and contractor takeoff assumptions
Explore All 156 Construction Materials
Compare prices, specs, and sustainability ratings across lumber, concrete, steel, roofing, insulation, flooring, and more.
How much does cabinet pulls and knobs cost in 2026?
Cabinet Pulls and Knobs costs an average of $5.00 per each in 2026. Prices range from $1.50 to $15.00 per each depending on your location, supplier, and quantity purchased. A typical project using cabinet pulls and knobs costs approximately $250.
How long does cabinet pulls and knobs last?
Cabinet Pulls and Knobs has an expected lifespan of approximately 20 years when properly installed and maintained. Actual durability depends on climate exposure, installation quality, and maintenance practices. Plan for periodic replacement or maintenance to maximize its useful life.
What is cabinet pulls and knobs used for?
Cabinet Pulls and Knobs is commonly used for Kitchen cabinets, Bathroom vanities, Dressers, Closet doors. It falls in the Hardware category of construction materials. Cabinet pulls and knobs are the finishing touch on kitchen and bathroom cabinets. Replacing outdated hardware is one of the most affordable ways to dramatically update the look of a kitchen or bathroom.
How much waste should I plan for with cabinet pulls and knobs?
Plan for approximately 0% waste when ordering cabinet pulls and knobs. For a project requiring 100 eachs of material, you should order 100 eachs to account for cuts, breakage, and fitting. Waste factors vary by project complexity and installer experience.
What are alternatives to cabinet pulls and knobs?
Common alternatives to Cabinet Pulls and Knobs include Door Hinges. Each alternative offers different trade-offs in terms of cost, durability, and performance. Door Hinges costs $4.50 per each and lasts approximately 30 years.
Is cabinet pulls and knobs sustainable?
Cabinet Pulls and Knobs has a sustainability rating of 3 out of 5 (Average). This material has an average environmental impact. Consider locally sourced options when available to reduce transportation-related emissions.
How much does 500 eachs of cabinet pulls and knobs cost installed?
Ordering 500 eachs with the 0% waste factor means buying 500 eachs: about $2,500 in material at the $5.00 planning price (range $750–$7,500), plus roughly $1,500 in installation labor at the $3.00 per each allowance, about $4,000 total before delivery, fasteners, adhesives and permits. These are HammerIO planning estimates (national baseline); regional factors and supplier quotes move the final number.
Who installs cabinet pulls and knobs and what do they earn per hour in 2026?
Cabinet Pulls and Knobs is typically installed by carpenters. The U.S. Bureau of Labor Statistics (OEWS, May 2025) reports a national median wage of $29.12 per hour for Carpenters, ranging from $23.44 in Dallas, TX to $38.68 in Chicago, IL-IN among the ten largest metros. Contractor billing rates run higher than the wage because they include overhead, insurance, equipment and profit, so use the metro-to-national ratio, not the wage itself, to adjust the labor allowance on this page.