Fireplace Installation in Georgetown, TX — Costs $3,050 to $36,601

What does fireplace installation cost in Georgetown? Average $9,760, ranging $3,050–$36,601. Labor runs $41.51/hr locally — 22% above the national average. Free breakdown with material + labor split.

Quick Estimate: Fireplace Installation in Georgetown, TX

A typical fireplace installation in Georgetown costs about $9,760 in 2026, with a practical range from $3,050 to $36,601. Local labor runs $41.51/hr, materials index at 102, and expected ROI is 80%.

Average Cost

$9,760

Permit Budget

$1,390

Labor Share

$5,368

Timeline

3-7 days

Hiring a Fireplace Installation Contractor in Georgetown, TX

When comparing fireplace installation contractors in Georgetown, ask each company to quote the same scope, material grade, permit responsibility, cleanup, warranty, and timeline. That keeps the $3,050 to $36,601 local range useful instead of comparing unrelated bids.

Bid must include

Labor hours, material allowance, permit responsibility, disposal, equipment rental, and any change-order rules.

Verify before deposit

License status, insurance, recent local photos, warranty term, payment schedule, and who handles inspections.

Red flags

Cash-only pricing, vague scope, no written warranty, unusually low pump or material allowance, or a large upfront payment.

Georgetown, TX Market

+22% vs national

Labor Rate

$41.51/hr

Material Index

102

Avg Permit Cost

$1,390

Median Home Price

$380,000

In a smaller market like Georgetown, Texas, the pool of contractors specializing in fireplace installation may be more limited. Getting 3+ quotes is especially important to ensure fair pricing. At 22% above the national average, Georgetown is one of the more expensive markets for home improvement — driven primarily by above-average labor rates in the region. The median home in Georgetown is valued at $380,000, putting this project at about 2.6% of home value — a moderate investment with a projected 80% ROI.

Low Estimate

$3,050

National: $2,500

Mid-Range

$9,760

National: $8,000

High End

$36,601

National: $30,000

Pricing Basis

Scope

priced by design + equipment

Duration: 3-7 days
DIY: Hard
Permits: Required
ROI: 80%

Fireplace Installation Cost Calculator for Georgetown

Adjusted for Georgetown's labor rate ($41.51/hr) and material costs (index 102).

Scope-Based Estimate

This project is not priced cleanly by square foot. For fireplace installation, design complexity, equipment, excavation, access, permits, and finish quality move the quote more than floor area.

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Georgetown

$9,370

Based on mid scope, adjusted for Georgetown market rates.

Local Cost Breakdown

Labor (55%)$5,368

At Georgetown's average rate of $41.51/hr (38% above national avg)

Materials (45%)$4,392

Material cost index 102 (2% above national baseline of 100)

Fireplace Installation vs. Home Value in Georgetown

MetricGeorgetownNational Avg
Fireplace Installation (Mid-Range)$9,760$8,000
Median Home Price$380,000$350,000
Project as % of Home Value2.6%2.3%
Estimated ROI80%80%
Median Household Income$72,000$75,000

What Affects the Price in Georgetown

  • 1Local labor rates ($41.51/hr in Georgetown)
  • 2Material cost index (102 vs national 100)
  • 3Fireplace type (gas, electric, wood)
  • 4Venting requirements
  • 5Surround and mantel
  • 6Gas line extension

Popular Upgrades

  • Linear gas fireplace
  • Tiled surround
  • Floating mantel shelf

Other Projects in Georgetown, TX

Fireplace Installation in Other Texas Cities

Planning a Fireplace Installation in Georgetown

Building permits are typically required for a fireplace installation in Georgetown. The average permit fee in this area is $1,390, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 3-7 days from start to finish.

A fireplace installation is a complex project best left to licensed professionals. In Georgetown, skilled contractors charge an average of $41.51/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

For the median Georgetown household earning $72,000/year, this project at $9,760 represents a significant investment. Consider financing options or phasing the work to spread costs over time.

Financing the project? Compare current rates with Georgetown mortgage and HELOC rates to estimate monthly payments. For tax implications, mortgage interest deduction may apply — see SALT deduction guide.

Methodology & Local Data Sources

How we estimate fireplace installation costs in Georgetown: Our local cost figure of $9,760 for Georgetown, TX is calculated by adjusting the national mid-range baseline of $8,000 using two location-specific factors:

  1. Labor adjustment55%% of the project cost is labor. We multiply this by Georgetown's wage index, derived from BLS Occupational Employment and Wage Statistics for construction workers (SOC 47-0000). Georgetown skilled-trade labor averages $41.51/hr, compared to the national construction worker median.
  2. Materials adjustment45%% of cost is materials. Georgetown's material cost index is 102 (national baseline = 100), based on regional shipping, lumber, concrete, and metal prices tracked by the Bureau of Labor Statistics Producer Price Index for Construction Materials.
  3. Permit fees add $1,390 on average in Georgetown. Permit costs vary by project scope, square footage (200 sqft typical), and inspection requirements set by the local building department.
  4. Scope pricing for this project in Georgetown: quotes should be compared by equipment, design, access, permit, and finish assumptions rather than a square-foot shortcut.

Authoritative data sources (US gov):

Disclaimer: Cost estimates are based on regional averages and modeling — actual quotes from licensed contractors in Georgetown may vary ±15% based on project complexity, contractor backlog, and material availability. Always obtain at least 3 written bids before committing.

Reviewed by Brazora Monk · Last updated 2026

Find a Licensed Contractor + Permits in Georgetown

For a fireplace installation in Georgetown, Texas, verify whether the contractor or specialty trade must be licensed, registered, insured, or permitted locally. Use official lookup tools and the local building department instead of trusting general directory sites:

🏗️ Verify Contractor License

Each state has its own licensing board. Verify before signing any contract:

🏛️ City/County Permits

Permit fees vary by jurisdiction within Texas:

🛡️ Insurance & Bonding

Verify contractor has workers' comp + general liability:

⚡ Energy & Building Codes

Most Texas jurisdictions adopt these:

Why this matters: Hiring an unqualified or uninsured contractor in Texas can create insurance, inspection, warranty, and code-compliance problems. Always verify license or registration requirements, insurance, permit responsibility and inspection closeout before signing contracts.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,916 cities nationwide.

View All Project Costs

Across Our Network — for Georgetown homeowners

Frequently Asked Questions

How much does a fireplace installation cost in Georgetown, TX?
The average fireplace installation in Georgetown, TX costs $9,760 in 2026. Costs range from $3,050 for a basic project to $36,601 for a high-end renovation. Georgetown is 22% more expensive than the national average of $8,000.
What is the labor rate for contractors in Georgetown?
The average contractor labor rate in Georgetown, TX is $41.51/hour, compared to the national average of $30/hour. For a fireplace installation, labor typically accounts for 55% of the total cost, which is approximately $5,368 in Georgetown.
How do I choose a fireplace installation contractor in Georgetown, TX?
Ask Georgetown contractors for a written scope, labor and material split, permit responsibility, warranty terms, proof of insurance, and recent local references. Compare at least three bids using the same project assumptions so the $9,760 local estimate can be checked against real contractor pricing.
Are materials more expensive in Georgetown?
Georgetown has a material cost index of 102 (national average = 100). Materials cost about 2% more than the national average. For a fireplace installation, materials account for 45% of the cost, approximately $4,392.
Do I need a permit for a fireplace installation in Georgetown?
Yes, a fireplace installation typically requires building permits in Georgetown, TX. The average permit cost in Georgetown is $1,390. Always confirm requirements with the Georgetown building department before starting work.
Is a fireplace installation a good investment in Georgetown?
A fireplace installation provides an estimated 80% ROI nationally. In Georgetown, where the median home price is $380,000, this project costs about 2.6% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Related Calculators