Fireplace Installation in Dallas, TX — Costs $2,912 to $34,939

What does fireplace installation cost in Dallas? Average $9,317, ranging $2,912–$34,939. Labor runs $36.28/hr locally — 16% above the national average. Free breakdown with material + labor split.

Quick Estimate: Fireplace Installation in Dallas, TX

A typical fireplace installation in Dallas costs about $9,317 in 2026, with a practical range from $2,912 to $34,939. Local labor runs $36.28/hr, materials index at 111, and expected ROI is 80%.

Average Cost

$9,317

Permit Budget

$1,076

Labor Share

$5,124

Timeline

3-7 days

Hiring a Fireplace Installation Contractor in Dallas, TX

When comparing fireplace installation contractors in Dallas, ask each company to quote the same scope, material grade, permit responsibility, cleanup, warranty, and timeline. That keeps the $2,912 to $34,939 local range useful instead of comparing unrelated bids.

Bid must include

Labor hours, material allowance, permit responsibility, disposal, equipment rental, and any change-order rules.

Verify before deposit

License status, insurance, recent local photos, warranty term, payment schedule, and who handles inspections.

Red flags

Cash-only pricing, vague scope, no written warranty, unusually low pump or material allowance, or a large upfront payment.

Dallas, TX Market

+16% vs national

Labor Rate

$36.28/hr

Material Index

111

Avg Permit Cost

$1,076

Median Home Price

$244,274

As one of the largest metros in Texas, Dallas has a competitive contractor market with hundreds of licensed professionals. This typically gives homeowners more leverage on pricing, though high demand for renovations can offset that advantage. At 16% above the national average, Dallas is one of the more expensive markets for home improvement — driven primarily by above-average labor rates in the region. At a median home price of $244,274, homeowners in Dallas should weigh the project cost (3.8% of home value) carefully against expected returns to avoid over-improving for the local market.

Low Estimate

$2,912

National: $2,500

Mid-Range

$9,317

National: $8,000

High End

$34,939

National: $30,000

Pricing Basis

Scope

priced by design + equipment

Duration: 3-7 days
DIY: Hard
Permits: Required
ROI: 80%

Fireplace Installation Cost Calculator for Dallas

Adjusted for Dallas's labor rate ($36.28/hr) and material costs (index 111).

Scope-Based Estimate

This project is not priced cleanly by square foot. For fireplace installation, design complexity, equipment, excavation, access, permits, and finish quality move the quote more than floor area.

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Dallas

$8,944

Based on mid scope, adjusted for Dallas market rates.

Local Cost Breakdown

Labor (55%)$5,124

At Dallas's average rate of $36.28/hr (21% above national avg)

Materials (45%)$4,193

Material cost index 111 (11% above national baseline of 100)

Fireplace Installation vs. Home Value in Dallas

MetricDallasNational Avg
Fireplace Installation (Mid-Range)$9,317$8,000
Median Home Price$244,274$350,000
Project as % of Home Value3.8%2.3%
Estimated ROI80%80%
Median Household Income$61,964$75,000

What Affects the Price in Dallas

  • 1Local labor rates ($36.28/hr in Dallas)
  • 2Material cost index (111 vs national 100)
  • 3Fireplace type (gas, electric, wood)
  • 4Venting requirements
  • 5Surround and mantel
  • 6Gas line extension

Popular Upgrades

  • Linear gas fireplace
  • Tiled surround
  • Floating mantel shelf

Fireplace Installation in Other Texas Cities

Planning a Fireplace Installation in Dallas

Building permits are typically required for a fireplace installation in Dallas. The average permit fee in this area is $1,076, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 3-7 days from start to finish.

A fireplace installation is a complex project best left to licensed professionals. In Dallas, skilled contractors charge an average of $36.28/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

For the median Dallas household earning $61,964/year, this project at $9,317 represents a significant investment. Consider financing options or phasing the work to spread costs over time.

Financing the project? Compare current rates with Dallas mortgage and HELOC rates to estimate monthly payments. For tax implications, mortgage interest deduction may apply — see SALT deduction guide.

Methodology & Local Data Sources

How we estimate fireplace installation costs in Dallas: Our local cost figure of $9,317 for Dallas, TX is calculated by adjusting the national mid-range baseline of $8,000 using two location-specific factors:

  1. Labor adjustment55%% of the project cost is labor. We multiply this by Dallas's wage index, derived from BLS Occupational Employment and Wage Statistics for construction workers (SOC 47-0000). Dallas skilled-trade labor averages $36.28/hr, compared to the national construction worker median.
  2. Materials adjustment45%% of cost is materials. Dallas's material cost index is 111 (national baseline = 100), based on regional shipping, lumber, concrete, and metal prices tracked by the Bureau of Labor Statistics Producer Price Index for Construction Materials.
  3. Permit fees add $1,076 on average in Dallas. Permit costs vary by project scope, square footage (200 sqft typical), and inspection requirements set by the local building department.
  4. Scope pricing for this project in Dallas: quotes should be compared by equipment, design, access, permit, and finish assumptions rather than a square-foot shortcut.

Authoritative data sources (US gov):

Disclaimer: Cost estimates are based on regional averages and modeling — actual quotes from licensed contractors in Dallas may vary ±15% based on project complexity, contractor backlog, and material availability. Always obtain at least 3 written bids before committing.

Reviewed by Brazora Monk · Last updated 2026

Find a Licensed Contractor + Permits in Dallas

For a fireplace installation in Dallas, Texas, verify whether the contractor or specialty trade must be licensed, registered, insured, or permitted locally. Use official lookup tools and the local building department instead of trusting general directory sites:

🏗️ Verify Contractor License

Each state has its own licensing board. Verify before signing any contract:

🏛️ City/County Permits

Permit fees vary by jurisdiction within Texas:

🛡️ Insurance & Bonding

Verify contractor has workers' comp + general liability:

⚡ Energy & Building Codes

Most Texas jurisdictions adopt these:

Why this matters: Hiring an unqualified or uninsured contractor in Texas can create insurance, inspection, warranty, and code-compliance problems. Always verify license or registration requirements, insurance, permit responsibility and inspection closeout before signing contracts.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,916 cities nationwide.

View All Project Costs

Across Our Network — for Dallas homeowners

Frequently Asked Questions

How much does a fireplace installation cost in Dallas, TX?
The average fireplace installation in Dallas, TX costs $9,317 in 2026. Costs range from $2,912 for a basic project to $34,939 for a high-end renovation. Dallas is 16% more expensive than the national average of $8,000.
What is the labor rate for contractors in Dallas?
The average contractor labor rate in Dallas, TX is $36.28/hour, compared to the national average of $30/hour. For a fireplace installation, labor typically accounts for 55% of the total cost, which is approximately $5,124 in Dallas.
How do I choose a fireplace installation contractor in Dallas, TX?
Ask Dallas contractors for a written scope, labor and material split, permit responsibility, warranty terms, proof of insurance, and recent local references. Compare at least three bids using the same project assumptions so the $9,317 local estimate can be checked against real contractor pricing.
Are materials more expensive in Dallas?
Dallas has a material cost index of 111 (national average = 100). Materials cost about 11% more than the national average. For a fireplace installation, materials account for 45% of the cost, approximately $4,193.
Do I need a permit for a fireplace installation in Dallas?
Yes, a fireplace installation typically requires building permits in Dallas, TX. The average permit cost in Dallas is $1,076. Always confirm requirements with the Dallas building department before starting work.
Is a fireplace installation a good investment in Dallas?
A fireplace installation provides an estimated 80% ROI nationally. In Dallas, where the median home price is $244,274, this project costs about 3.8% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Related Calculators