Hurricane Ties (Framing Connectors) Cost & Calculator
Hurricane ties (also called rafter ties or framing anchors) connect roof rafters and trusses to wall top plates. They provide critical uplift resistance against high winds and are required by code in many hurricane and seismic zones.
Unit Price
$1.50
per each
Labor Cost
$1.00
per each
Durability
75
years lifespan
Sustainability
4/5
Good
Category: Fasteners
Range: $0.80 – $3.00/each
Waste Factor: 5%
Avg Project: $350
Quick answer: Hurricane Ties cost in 2026
Hurricane Ties costs about $1.50 per each (typical range $0.80–$3.00) plus roughly $1.00 per each for installation labor, or about $2.50 per each installed. Order 5% extra for waste: 500 eachs becomes 525 eachs, about $788 in material and $1,288 installed. HammerIO planning estimates, a national baseline adjusted by regional factors on city and state pages.
Labor is priced by carpenters: the BLS OEWS May 2025 median wage is $29.12/hr nationally, $35.72 in New York and $23.44 in Dallas. Last reviewed .
Estimate Hurricane Ties (Framing Connectors) Cost Before You Order or Compare Bids
Step 1
Price Hurricane Ties (Framing Connectors) by the right unit
Start with the measured quantity in eachs, then compare the current unit range of $0.80 to $3.00 per each.
Step 2
Add waste, labor, and install accessories
Apply the default 5% waste factor, then include labor, fasteners, trim, adhesives, delivery, rental tools, and other project-specific accessories.
Step 3
Use the result to check written bids
Compare the calculator result against supplier units and contractor line items, then verify code, permit, and site-condition assumptions before ordering.
Contractor Takeoff Notes
How to Budget Hurricane Ties (Framing Connectors) Without Missing Hidden Costs
Hurricane Ties (Framing Connectors) should be budgeted as a complete installed assembly, not only as a commodity unit price. Quantity, waste, labor, local supply, code requirements, and the accessories needed for installation drive the final project cost.
$263
sample total for 105 eachs
Price drivers
+Unit price ranges from $0.80 to $3.00 per each, with $1.50 as the national midpoint used in this calculator.
+Labor is modeled at $1.00 per each, but local contractor rates and project access can move that number sharply.
+The default 5% waste factor covers typical cuts and field losses; complex layouts need a larger buffer.
Ordering checks
+Measure the installed quantity in eachs before adding waste or accessories.
+Confirm grade, thickness, profile, warranty, and code requirements before comparing quotes.
Cost/Year = unit price divided by expected lifespan. Lower cost/year indicates better long-term value. Note: units may differ between materials.
Best Uses
Rafter-to-wall connections
Hurricane-prone areas
Seismic zones
Deck ledger connections
Material Details
Average Project Cost
$350
Typical project using this material
Sustainability Rating
Good, eco-friendly choice
Waste Factor
5%
Order 5% extra to account for cuts, breakage, and fitting
Hurricane Ties (Framing Connectors): Complete Buying Guide 2026
Hurricane ties (also called rafter ties or framing anchors) connect roof rafters and trusses to wall top plates. They provide critical uplift resistance against high winds and are required by code in many hurricane and seismic zones. In 2026, hurricane ties (framing connectors) prices average $1.50 per each, with a typical range of $0.80 to $3.00 depending on your region, supplier relationships, and order quantity.
When budgeting for a project using hurricane ties (framing connectors), factor in approximately 5% additional material for waste, plus labor costs averaging $1.00 per each for professional installation. A typical project using this material runs approximately $350 including both materials and labor.
With an expected lifespan of 75 years, hurricane ties (framing connectors) represents a cost of approximately $0.02 per each per year of service life. This exceptional longevity makes it one of the most cost-effective materials when measured over its full lifespan.
For searchers comparing bids, the key number is not only the shelf price. The installed cost for hurricane ties (framing connectors) depends on accessory materials, waste, job access, minimum order size, delivery, regional labor rates, and whether the project needs permit or code-driven upgrades. This page combines the HammerIO material database with 2026 cost modeling, contractor takeoff assumptions, and public construction cost references.
Computed from this page's planning figures: material = quantity × (1 + 5% waste) × unit price; labor = quantity × $1.00 per each. Delivery, fasteners, adhesives, rental tools and permits are extra.
Quantity needed
Order (+5% waste)
Material (low – typical – high)
Labor allowance
Installed (typical)
100 eachs
105 eachs
$84 – $158 – $315
$100
$258
500 eachs
525 eachs
$420 – $788 – $1,575
$500
$1,288
1,000 eachs
1,050 eachs
$840 – $1,575 – $3,150
$1,000
$2,575
HammerIO planning estimates (national baseline adjusted by regional factors). Verify permit requirements with your local building department.
Who Installs Hurricane Ties: Carpenters Wages in the 10 Largest Metros
The $1.00 per each labor allowance is a national figure. To localize it, compare your metro's median wage for carpenters with the U.S. median below and scale the allowance by the same ratio.
Carpenters: median hourly wage, 10 largest U.S. metros vs. national (BLS OEWS May 2025)
Metro area
Median wage
vs. U.S. median
United States
$29.12/hr
baseline
New York, NY-NJ
$35.72/hr
+23%
Los Angeles, CA
$36.41/hr
+25%
Chicago, IL-IN
$38.68/hr
+33%
Dallas, TX
$23.44/hr
-20%
Houston, TX
$23.88/hr
-18%
Washington, DC-VA-MD-WV
$29.23/hr
at U.S. median
Miami, FL
$24.79/hr
-15%
Philadelphia, PA-NJ-DE-MD
$29.70/hr
+2%
Atlanta, GA
$24.37/hr
-16%
Phoenix, AZ
$29.00/hr
at U.S. median
Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (May 2025), median hourly wages. These are employee wages, not contractor billing rates, a contractor's quoted hourly rate adds overhead, insurance, equipment and profit on top of the wage. “, ” means BLS did not publish a metro estimate for that occupation. Occupation: Carpenters (SOC 47-2031).
Chicago, IL-IN carpenters earn a median $38.68/hr (+33% vs. the $29.12 U.S. median) while Dallas, TX is $23.44/hr (-20%). For a 500-each job that moves the $500 national labor allowance to roughly $402 in Dallas, TX and $664 in Chicago, IL-IN, before contractor overhead and profit. See the state construction cost pages for statewide figures.
Methodology & Data Sources: Hurricane Ties (Framing Connectors) Cost Data
How we calculate Hurricane Ties (Framing Connectors) costs: Our pricing model combines the HammerIO material database (planning estimates, a national baseline adjusted by regional factors on city and state pages), U.S. Bureau of Labor Statistics OEWS May 2025 trade wages for the labor allowance, EPA Environmentally Preferable Purchasing guidance for sustainability ratings, DOE Building Technologies Office benchmarks for energy-related materials, and contractor takeoff assumptions. Unit prices are reviewed quarterly and cross-checked against common supplier ranges where available.
Unit price ($1.50/each): National midpoint estimate for mid-market grade materials sourced through standard supply channels.
Average project cost ($350): Derived from material quantity, labor allowance, waste, and typical residential/light commercial installation assumptions.
Waste factor (5%): Per NAHB (National Association of Home Builders) construction waste estimation guidelines, accounting for cuts, breakage, and field adjustments.
Durability (75 years): HammerIO planning estimate based on typical manufacturer warranty periods and expected service life for the material class under normal residential use.
Sustainability rating (4/5): Composite score from EPA Environmentally Preferable Purchasing criteria, including embodied carbon, recyclability, and VOC emissions per LEED v4.1 thresholds.
Disclaimer: Construction material prices vary significantly by region, supplier, project volume, and market conditions. The figures shown represent national averages and should be used for budgeting and comparison purposes only. Always obtain local contractor quotes before committing to a project budget.
Reviewed by Rowan Ashby · Last updated September 17, 2026 · Pricing sourced from the HammerIO 2026 material database (planning estimates), BLS OEWS May 2025 trade wages, public agency guidance, and contractor takeoff assumptions
Explore All 156 Construction Materials
Compare prices, specs, and sustainability ratings across lumber, concrete, steel, roofing, insulation, flooring, and more.
How much does hurricane ties (framing connectors) cost in 2026?
Hurricane Ties (Framing Connectors) costs an average of $1.50 per each in 2026. Prices range from $0.80 to $3.00 per each depending on your location, supplier, and quantity purchased. A typical project using hurricane ties (framing connectors) costs approximately $350.
How long does hurricane ties (framing connectors) last?
Hurricane Ties (Framing Connectors) has an expected lifespan of approximately 75 years when properly installed and maintained. Actual durability depends on climate exposure, installation quality, and maintenance practices. This is considered a very long-lasting material that often outlasts the building itself.
What is hurricane ties (framing connectors) used for?
Hurricane Ties (Framing Connectors) is commonly used for Rafter-to-wall connections, Hurricane-prone areas, Seismic zones, Deck ledger connections. It falls in the Fasteners category of construction materials. Hurricane ties (also called rafter ties or framing anchors) connect roof rafters and trusses to wall top plates. They provide critical uplift resistance against high winds and are required by code in many hurricane and seismic zones.
How much waste should I plan for with hurricane ties (framing connectors)?
Plan for approximately 5% waste when ordering hurricane ties (framing connectors). For a project requiring 100 eachs of material, you should order 105 eachs to account for cuts, breakage, and fitting. Waste factors vary by project complexity and installer experience.
What are alternatives to hurricane ties (framing connectors)?
Common alternatives to Hurricane Ties (Framing Connectors) include Steel Joist Hangers. Each alternative offers different trade-offs in terms of cost, durability, and performance. Steel Joist Hangers costs $3.80 per each and lasts approximately 75 years.
Is hurricane ties (framing connectors) sustainable?
Hurricane Ties (Framing Connectors) has a sustainability rating of 4 out of 5 (Good). This material is considered an environmentally responsible choice due to its recyclability, renewable sourcing, or minimal environmental impact.
How much does 500 eachs of hurricane ties cost installed?
Ordering 500 eachs with the 5% waste factor means buying 525 eachs: about $788 in material at the $1.50 planning price (range $420–$1,575), plus roughly $500 in installation labor at the $1.00 per each allowance, about $1,288 total before delivery, fasteners, adhesives and permits. These are HammerIO planning estimates (national baseline); regional factors and supplier quotes move the final number.
Who installs hurricane ties and what do they earn per hour in 2026?
Hurricane Ties is typically installed by carpenters. The U.S. Bureau of Labor Statistics (OEWS, May 2025) reports a national median wage of $29.12 per hour for Carpenters, ranging from $23.44 in Dallas, TX to $38.68 in Chicago, IL-IN among the ten largest metros. Contractor billing rates run higher than the wage because they include overhead, insurance, equipment and profit, so use the metro-to-national ratio, not the wage itself, to adjust the labor allowance on this page.