Synthetic rubber membrane for flat and low-slope roofing with excellent weather resistance.
Unit Price
$5.00
per sq ft
Labor Cost
$2.00
per sq ft
Durability
30
years lifespan
Sustainability
4/5
Good
Category: Roofing
Range: $3.00 – $8.00/sq ft
Waste Factor: 5%
Avg Project: $8,000
Quick answer: EPDM Rubber Roofing cost in 2026
EPDM Rubber Roofing costs about $5.00 per sq ft (typical range $3.00–$8.00) plus roughly $2.00 per sq ft for installation labor, or about $7.00 per sq ft installed. Order 5% extra for waste: 500 sq fts becomes 525 sq fts, about $2,625 in material and $3,625 installed. HammerIO planning estimates, a national baseline adjusted by regional factors on city and state pages.
Labor is priced by roofers: the BLS OEWS May 2025 median wage is $26.65/hr nationally, $36.73 in New York and $22.59 in Dallas. Last reviewed .
Estimate EPDM Rubber Roofing Cost Before You Order or Compare Bids
Step 1
Price EPDM Rubber Roofing by the right unit
Start with the measured quantity in sq fts, then compare the current unit range of $3.00 to $8.00 per sq ft.
Step 2
Add waste, labor, and install accessories
Apply the default 5% waste factor, then include labor, fasteners, trim, adhesives, delivery, rental tools, and other project-specific accessories.
Step 3
Use the result to check written bids
Compare the calculator result against supplier units and contractor line items, then verify code, permit, and site-condition assumptions before ordering.
Contractor Takeoff Notes
How to Budget EPDM Rubber Roofing Without Missing Hidden Costs
EPDM Rubber Roofing should be budgeted as a complete installed assembly, not only as a commodity unit price. Quantity, waste, labor, local supply, code requirements, and the accessories needed for installation drive the final project cost.
$735
sample total for 105 sq fts
Price drivers
+Unit price ranges from $3.00 to $8.00 per sq ft, with $5.00 as the national midpoint used in this calculator.
+Labor is modeled at $2.00 per sq ft, but local contractor rates and project access can move that number sharply.
+The default 5% waste factor covers typical cuts and field losses; complex layouts need a larger buffer.
Ordering checks
+Measure the installed quantity in sq fts before adding waste or accessories.
+Confirm grade, thickness, profile, warranty, and code requirements before comparing quotes.
Based on 105 sq fts at $5.00/sq ft + $2.00/sq ft labor. Actual costs vary by location and supplier.
Specifications
Thickness45-90 mil
ColorBlack or white
SeamsAdhesive or tape
Best Uses
Flat roofs
Low-slope commercial
Garage roofs
Material Details
Average Project Cost
$8,000
Typical project using this material
Sustainability Rating
Good, eco-friendly choice
Waste Factor
5%
Order 5% extra to account for cuts, breakage, and fitting
EPDM Rubber Roofing: Complete Buying Guide 2026
Synthetic rubber membrane for flat and low-slope roofing with excellent weather resistance. In 2026, epdm rubber roofing prices average $5.00 per sq ft, with a typical range of $3.00 to $8.00 depending on your region, supplier relationships, and order quantity.
When budgeting for a project using epdm rubber roofing, factor in approximately 5% additional material for waste, plus labor costs averaging $2.00 per sq ft for professional installation. A typical project using this material runs approximately $8,000 including both materials and labor.
With an expected lifespan of 30 years, epdm rubber roofing represents a cost of approximately $0.17 per sq ft per year of service life. This solid lifespan provides good value for most residential and commercial applications.
For searchers comparing bids, the key number is not only the shelf price. The installed cost for epdm rubber roofing depends on accessory materials, waste, job access, minimum order size, delivery, regional labor rates, and whether the project needs permit or code-driven upgrades. This page combines the HammerIO material database with 2026 cost modeling, contractor takeoff assumptions, and public construction cost references.
Computed from this page's planning figures: material = quantity × (1 + 5% waste) × unit price; labor = quantity × $2.00 per sq ft. Delivery, fasteners, adhesives, rental tools and permits are extra.
Quantity needed
Order (+5% waste)
Material (low – typical – high)
Labor allowance
Installed (typical)
100 sq fts
105 sq fts
$315 – $525 – $840
$200
$725
500 sq fts
525 sq fts
$1,575 – $2,625 – $4,200
$1,000
$3,625
1,000 sq fts
1,050 sq fts
$3,150 – $5,250 – $8,400
$2,000
$7,250
HammerIO planning estimates (national baseline adjusted by regional factors). Verify permit requirements with your local building department.
Who Installs EPDM Rubber Roofing: Roofers Wages in the 10 Largest Metros
The $2.00 per sq ft labor allowance is a national figure. To localize it, compare your metro's median wage for roofers with the U.S. median below and scale the allowance by the same ratio.
Roofers: median hourly wage, 10 largest U.S. metros vs. national (BLS OEWS May 2025)
Metro area
Median wage
vs. U.S. median
United States
$26.65/hr
baseline
New York, NY-NJ
$36.73/hr
+38%
Los Angeles, CA
$30.56/hr
+15%
Chicago, IL-IN
$39.47/hr
+48%
Dallas, TX
$22.59/hr
-15%
Houston, TX
$21.87/hr
-18%
Washington, DC-VA-MD-WV
$28.05/hr
+5%
Miami, FL
$23.09/hr
-13%
Philadelphia, PA-NJ-DE-MD
$28.72/hr
+8%
Atlanta, GA
$23.61/hr
-11%
Phoenix, AZ
$22.96/hr
-14%
Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (May 2025), median hourly wages. These are employee wages, not contractor billing rates, a contractor's quoted hourly rate adds overhead, insurance, equipment and profit on top of the wage. “, ” means BLS did not publish a metro estimate for that occupation. Occupation: Roofers (SOC 47-2181).
Chicago, IL-IN roofers earn a median $39.47/hr (+48% vs. the $26.65 U.S. median) while Houston, TX is $21.87/hr (-18%). For a 500-sq ft job that moves the $1,000 national labor allowance to roughly $821 in Houston, TX and $1,481 in Chicago, IL-IN, before contractor overhead and profit. See the state construction cost pages for statewide figures.
Methodology & Data Sources: EPDM Rubber Roofing Cost Data
How we calculate EPDM Rubber Roofing costs: Our pricing model combines the HammerIO material database (planning estimates, a national baseline adjusted by regional factors on city and state pages), U.S. Bureau of Labor Statistics OEWS May 2025 trade wages for the labor allowance, EPA Environmentally Preferable Purchasing guidance for sustainability ratings, DOE Building Technologies Office benchmarks for energy-related materials, and contractor takeoff assumptions. Unit prices are reviewed quarterly and cross-checked against common supplier ranges where available.
Unit price ($5.00/sq ft): National midpoint estimate for mid-market grade materials sourced through standard supply channels.
Average project cost ($8,000): Derived from material quantity, labor allowance, waste, and typical residential/light commercial installation assumptions.
Waste factor (5%): Per NAHB (National Association of Home Builders) construction waste estimation guidelines, accounting for cuts, breakage, and field adjustments.
Durability (30 years): HammerIO planning estimate based on typical manufacturer warranty periods and expected service life for the material class under normal residential use.
Sustainability rating (4/5): Composite score from EPA Environmentally Preferable Purchasing criteria, including embodied carbon, recyclability, and VOC emissions per LEED v4.1 thresholds.
Disclaimer: Construction material prices vary significantly by region, supplier, project volume, and market conditions. The figures shown represent national averages and should be used for budgeting and comparison purposes only. Always obtain local contractor quotes before committing to a project budget.
Reviewed by Rowan Ashby · Last updated September 17, 2026 · Pricing sourced from the HammerIO 2026 material database (planning estimates), BLS OEWS May 2025 trade wages, public agency guidance, and contractor takeoff assumptions
Explore All 156 Construction Materials
Compare prices, specs, and sustainability ratings across lumber, concrete, steel, roofing, insulation, flooring, and more.
EPDM Rubber Roofing costs an average of $5.00 per sq ft in 2026. Prices range from $3.00 to $8.00 per sq ft depending on your location, supplier, and quantity purchased. A typical project using epdm rubber roofing costs approximately $8,000.
How long does epdm rubber roofing last?
EPDM Rubber Roofing has an expected lifespan of approximately 30 years when properly installed and maintained. Actual durability depends on climate exposure, installation quality, and maintenance practices. This provides good long-term value for most residential applications.
What is epdm rubber roofing used for?
EPDM Rubber Roofing is commonly used for Flat roofs, Low-slope commercial, Garage roofs. It falls in the Roofing category of construction materials. Synthetic rubber membrane for flat and low-slope roofing with excellent weather resistance.
How much waste should I plan for with epdm rubber roofing?
Plan for approximately 5% waste when ordering epdm rubber roofing. For a project requiring 100 sq fts of material, you should order 105 sq fts to account for cuts, breakage, and fitting. Waste factors vary by project complexity and installer experience.
What are alternatives to epdm rubber roofing?
There are limited direct alternatives to EPDM Rubber Roofing. It is a specialized material in the Roofing category. Consult with a contractor for suitable substitutions based on your specific project requirements.
Is epdm rubber roofing sustainable?
EPDM Rubber Roofing has a sustainability rating of 4 out of 5 (Good). This material is considered an environmentally responsible choice due to its recyclability, renewable sourcing, or minimal environmental impact.
How much does 500 sq fts of epdm rubber roofing cost installed?
Ordering 500 sq fts with the 5% waste factor means buying 525 sq fts: about $2,625 in material at the $5.00 planning price (range $1,575–$4,200), plus roughly $1,000 in installation labor at the $2.00 per sq ft allowance, about $3,625 total before delivery, fasteners, adhesives and permits. These are HammerIO planning estimates (national baseline); regional factors and supplier quotes move the final number.
Who installs epdm rubber roofing and what do they earn per hour in 2026?
EPDM Rubber Roofing is typically installed by roofers. The U.S. Bureau of Labor Statistics (OEWS, May 2025) reports a national median wage of $26.65 per hour for Roofers, ranging from $21.87 in Houston, TX to $39.47 in Chicago, IL-IN among the ten largest metros. Contractor billing rates run higher than the wage because they include overhead, insurance, equipment and profit, so use the metro-to-national ratio, not the wage itself, to adjust the labor allowance on this page.