Standard brick is a time-tested masonry unit made from fired clay. It offers exceptional durability, fire resistance, and aesthetic appeal. Brick facades require virtually no maintenance and can last hundreds of years.
Unit Price
$0.80
per each
Labor Cost
$1.20
per each
Durability
100
years lifespan
Sustainability
4/5
Good
Category: Masonry
Range: $0.45 – $1.50/each
Waste Factor: 5%
Avg Project: $8,000
Quick answer: Standard Brick cost in 2026
Standard Brick costs about $0.80 per each (typical range $0.45–$1.50) plus roughly $1.20 per each for installation labor, or about $2.00 per each installed. Order 5% extra for waste: 500 eachs becomes 525 eachs, about $420 in material and $1,020 installed. HammerIO planning estimates, a national baseline adjusted by regional factors on city and state pages.
Labor is priced by brickmasons: the BLS OEWS May 2025 median wage is $29.87/hr nationally, $44.37 in New York and $28.56 in Dallas. Last reviewed .
Estimate Standard Brick Cost Before You Order or Compare Bids
Step 1
Price Standard Brick by the right unit
Start with the measured quantity in eachs, then compare the current unit range of $0.45 to $1.50 per each.
Step 2
Add waste, labor, and install accessories
Apply the default 5% waste factor, then include labor, fasteners, trim, adhesives, delivery, rental tools, and other project-specific accessories.
Step 3
Use the result to check written bids
Compare the calculator result against supplier units and contractor line items, then verify code, permit, and site-condition assumptions before ordering.
Contractor Takeoff Notes
How to Budget Standard Brick Without Missing Hidden Costs
Standard Brick should be budgeted as a complete installed assembly, not only as a commodity unit price. Quantity, waste, labor, local supply, code requirements, and the accessories needed for installation drive the final project cost.
$210
sample total for 105 eachs
Price drivers
+Unit price ranges from $0.45 to $1.50 per each, with $0.80 as the national midpoint used in this calculator.
+Labor is modeled at $1.20 per each, but local contractor rates and project access can move that number sharply.
+The default 5% waste factor covers typical cuts and field losses; complex layouts need a larger buffer.
Ordering checks
+Measure the installed quantity in eachs before adding waste or accessories.
+Confirm grade, thickness, profile, warranty, and code requirements before comparing quotes.
Cost/Year = unit price divided by expected lifespan. Lower cost/year indicates better long-term value. Note: units may differ between materials.
Best Uses
House facades
Accent walls
Patios and walkways
Fire pits
Material Details
Average Project Cost
$8,000
Typical project using this material
Sustainability Rating
Good, eco-friendly choice
Waste Factor
5%
Order 5% extra to account for cuts, breakage, and fitting
Standard Brick: Complete Buying Guide 2026
Standard brick is a time-tested masonry unit made from fired clay. It offers exceptional durability, fire resistance, and aesthetic appeal. Brick facades require virtually no maintenance and can last hundreds of years. In 2026, standard brick prices average $0.80 per each, with a typical range of $0.45 to $1.50 depending on your region, supplier relationships, and order quantity.
When budgeting for a project using standard brick, factor in approximately 5% additional material for waste, plus labor costs averaging $1.20 per each for professional installation. A typical project using this material runs approximately $8,000 including both materials and labor.
With an expected lifespan of 100 years, standard brick represents a cost of approximately $0.01 per each per year of service life. This exceptional longevity makes it one of the most cost-effective materials when measured over its full lifespan.
For searchers comparing bids, the key number is not only the shelf price. The installed cost for standard brick depends on accessory materials, waste, job access, minimum order size, delivery, regional labor rates, and whether the project needs permit or code-driven upgrades. This page combines the HammerIO material database with 2026 cost modeling, contractor takeoff assumptions, and public construction cost references.
Computed from this page's planning figures: material = quantity × (1 + 5% waste) × unit price; labor = quantity × $1.20 per each. Delivery, fasteners, adhesives, rental tools and permits are extra.
Quantity needed
Order (+5% waste)
Material (low – typical – high)
Labor allowance
Installed (typical)
100 eachs
105 eachs
$47 – $84 – $158
$120
$204
500 eachs
525 eachs
$236 – $420 – $788
$600
$1,020
1,000 eachs
1,050 eachs
$473 – $840 – $1,575
$1,200
$2,040
HammerIO planning estimates (national baseline adjusted by regional factors). Verify permit requirements with your local building department.
Who Installs Standard Brick: Brickmasons Wages in the 10 Largest Metros
The $1.20 per each labor allowance is a national figure. To localize it, compare your metro's median wage for brickmasons and blockmasons with the U.S. median below and scale the allowance by the same ratio.
Brickmasons: median hourly wage, 10 largest U.S. metros vs. national (BLS OEWS May 2025)
Metro area
Median wage
vs. U.S. median
United States
$29.87/hr
baseline
New York, NY-NJ
$44.37/hr
+49%
Los Angeles, CA
$30.51/hr
+2%
Chicago, IL-IN
$43.26/hr
+45%
Dallas, TX
$28.56/hr
-4%
Houston, TX
$27.12/hr
-9%
Washington, DC-VA-MD-WV
$29.17/hr
-2%
Miami, FL
$27.16/hr
-9%
Philadelphia, PA-NJ-DE-MD
$36.52/hr
+22%
Atlanta, GA
$27.21/hr
-9%
Phoenix, AZ
$28.55/hr
-4%
Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (May 2025), median hourly wages. These are employee wages, not contractor billing rates, a contractor's quoted hourly rate adds overhead, insurance, equipment and profit on top of the wage. “, ” means BLS did not publish a metro estimate for that occupation. Occupation: Brickmasons and Blockmasons (SOC 47-2021).
New York, NY-NJ brickmasons earn a median $44.37/hr (+49% vs. the $29.87 U.S. median) while Houston, TX is $27.12/hr (-9%). For a 500-each job that moves the $600 national labor allowance to roughly $545 in Houston, TX and $891 in New York, NY-NJ, before contractor overhead and profit. See the state construction cost pages for statewide figures.
Methodology & Data Sources: Standard Brick Cost Data
How we calculate Standard Brick costs: Our pricing model combines the HammerIO material database (planning estimates, a national baseline adjusted by regional factors on city and state pages), U.S. Bureau of Labor Statistics OEWS May 2025 trade wages for the labor allowance, EPA Environmentally Preferable Purchasing guidance for sustainability ratings, DOE Building Technologies Office benchmarks for energy-related materials, and contractor takeoff assumptions. Unit prices are reviewed quarterly and cross-checked against common supplier ranges where available.
Unit price ($0.80/each): National midpoint estimate for mid-market grade materials sourced through standard supply channels.
Average project cost ($8,000): Derived from material quantity, labor allowance, waste, and typical residential/light commercial installation assumptions.
Waste factor (5%): Per NAHB (National Association of Home Builders) construction waste estimation guidelines, accounting for cuts, breakage, and field adjustments.
Durability (100 years): HammerIO planning estimate based on typical manufacturer warranty periods and expected service life for the material class under normal residential use.
Sustainability rating (4/5): Composite score from EPA Environmentally Preferable Purchasing criteria, including embodied carbon, recyclability, and VOC emissions per LEED v4.1 thresholds.
Disclaimer: Construction material prices vary significantly by region, supplier, project volume, and market conditions. The figures shown represent national averages and should be used for budgeting and comparison purposes only. Always obtain local contractor quotes before committing to a project budget.
Reviewed by Rowan Ashby · Last updated September 17, 2026 · Pricing sourced from the HammerIO 2026 material database (planning estimates), BLS OEWS May 2025 trade wages, public agency guidance, and contractor takeoff assumptions
Explore All 156 Construction Materials
Compare prices, specs, and sustainability ratings across lumber, concrete, steel, roofing, insulation, flooring, and more.
Standard Brick costs an average of $0.80 per each in 2026. Prices range from $0.45 to $1.50 per each depending on your location, supplier, and quantity purchased. A typical project using standard brick costs approximately $8,000.
How long does standard brick last?
Standard Brick has an expected lifespan of approximately 100 years when properly installed and maintained. Actual durability depends on climate exposure, installation quality, and maintenance practices. This is considered a very long-lasting material that often outlasts the building itself.
What is standard brick used for?
Standard Brick is commonly used for House facades, Accent walls, Patios and walkways, Fire pits. It falls in the Masonry category of construction materials. Standard brick is a time-tested masonry unit made from fired clay. It offers exceptional durability, fire resistance, and aesthetic appeal. Brick facades require virtually no maintenance and can last hundreds of years.
How much waste should I plan for with standard brick?
Plan for approximately 5% waste when ordering standard brick. For a project requiring 100 eachs of material, you should order 105 eachs to account for cuts, breakage, and fitting. Waste factors vary by project complexity and installer experience.
What are alternatives to standard brick?
Common alternatives to Standard Brick include Thin Brick Veneer, Natural Stone Flooring, Concrete Blocks (CMU). Each alternative offers different trade-offs in terms of cost, durability, and performance. Thin Brick Veneer costs $8.00 per sq ft and lasts approximately 50 years.
Is standard brick sustainable?
Standard Brick has a sustainability rating of 4 out of 5 (Good). This material is considered an environmentally responsible choice due to its recyclability, renewable sourcing, or minimal environmental impact.
How much does 500 eachs of standard brick cost installed?
Ordering 500 eachs with the 5% waste factor means buying 525 eachs: about $420 in material at the $0.80 planning price (range $236–$788), plus roughly $600 in installation labor at the $1.20 per each allowance, about $1,020 total before delivery, fasteners, adhesives and permits. These are HammerIO planning estimates (national baseline); regional factors and supplier quotes move the final number.
Who installs standard brick and what do they earn per hour in 2026?
Standard Brick is typically installed by brickmasons. The U.S. Bureau of Labor Statistics (OEWS, May 2025) reports a national median wage of $29.87 per hour for Brickmasons and Blockmasons, ranging from $27.12 in Houston, TX to $44.37 in New York, NY-NJ among the ten largest metros. Contractor billing rates run higher than the wage because they include overhead, insurance, equipment and profit, so use the metro-to-national ratio, not the wage itself, to adjust the labor allowance on this page.