Sump Pump Installation in Upper Darby, PA — Costs $714 to $4,757
What does sump pump installation cost in Upper Darby? Average $1,784, ranging $714–$4,757. Labor runs $40.46/hr locally — 19% above the national average. Free breakdown with material + labor split.
Upper Darby, PA Market
+19% vs nationalLabor Rate
$40.46/hr
Material Index
95
Avg Permit Cost
$1,401
Median Home Price
$262,000
In a smaller market like Upper Darby, Pennsylvania, the pool of contractors specializing in sump pump installation may be more limited. Getting 3+ quotes is especially important to ensure fair pricing. At 19% above the national average, Upper Darby is one of the more expensive markets for home improvement — driven primarily by above-average labor rates in the region. The median home in Upper Darby is valued at $262,000, putting this project at about 0.7% of home value — a moderate investment with a projected 45% ROI.
Low Estimate
$714
National: $600
Mid-Range
$1,784
National: $1,500
High End
$4,757
National: $4,000
Per Sq Ft
$0
National: $0
Sump Pump Installation Cost Calculator for Upper Darby
Adjusted for Upper Darby's labor rate ($40.46/hr) and material costs (index 95).
Mid-grade materials, good quality fixtures, standard options.
Estimated Total in Upper Darby
$1,713
Based on 200 sq ft at mid quality, adjusted for Upper Darby market rates.
Local Cost Breakdown
At Upper Darby's average rate of $40.46/hr (35% above national avg)
Material cost index 95 (5% below national baseline of 100)
Sump Pump Installation vs. Home Value in Upper Darby
| Metric | Upper Darby | National Avg |
|---|---|---|
| Sump Pump Installation (Mid-Range) | $1,784 | $1,500 |
| Median Home Price | $262,000 | $350,000 |
| Project as % of Home Value | 0.7% | 0.4% |
| Estimated ROI | 45% | 45% |
| Median Household Income | $64,900 | $75,000 |
What Affects the Price in Upper Darby
- 1Local labor rates ($40.46/hr in Upper Darby)
- 2Material cost index (95 vs national 100)
- 3Basin size
- 4Submersible vs pedestal pump
- 5Horsepower rating
- 6Battery backup
Popular Upgrades
- Battery backup system
- Water alarm sensor
- Wi-Fi monitoring
Other Projects in Upper Darby, PA
Whole House Generator Installation
$16,941
HVAC System Replacement
$13,314
Whole House Plumbing Repiping
$12,091
Spray Foam Insulation
$9,354
Second Story Addition
$229,867
Accessory Dwelling Unit (ADU) Construction
$172,400
Room Addition
$103,440
Home Addition
$90,352
Sump Pump Installation in Other Pennsylvania Cities
Planning a Sump Pump Installation in Upper Darby
Building permits are typically required for a sump pump installation in Upper Darby. The average permit fee in this area is $1,401, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 4-8 hours from start to finish.
A sump pump installation is a complex project best left to licensed professionals. In Upper Darby, skilled contractors charge an average of $40.46/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.
For the median Upper Darby household earning $64,900/year, this project at $1,784 represents a significant investment. Consider financing options or phasing the work to spread costs over time.
Sump Pump Installation — National Guide
See the full national cost guide with DIY tips, cost factors, and ROI analysis.
All Construction Costs in Upper Darby
View labor rates, material costs, and project estimates for Upper Darby, PA.
Explore All Project Cost Guides
Compare costs across 120+ home improvement projects in 3,636 cities nationwide.
View All Project Costs