How much does a sump pump installation cost in Tampa, FL?

The average sump pump installation in Tampa, FL costs $1,680 in 2026. Costs range from $672 for a basic project to $4,479 for a high-end renovation. Tampa is 12% more expensive than the national average of $1,500.

What is the labor rate for contractors in Tampa?

The average contractor labor rate in Tampa, FL is $34.39/hour, compared to the national average of $30/hour. For a sump pump installation, labor typically accounts for 60% of the total cost, which is approximately $1,008 in Tampa.

Are materials more expensive in Tampa?

Tampa has a material cost index of 108 (national average = 100). Materials cost about 8% more than the national average. For a sump pump installation, materials account for 40% of the cost, approximately $672.

Do I need a permit for a sump pump installation in Tampa?

Yes, a sump pump installation typically requires building permits in Tampa, FL. The average permit cost in Tampa is $1,076. Always confirm requirements with the Tampa building department before starting work.

Is a sump pump installation a good investment in Tampa?

A sump pump installation provides an estimated 45% ROI nationally. In Tampa, where the median home price is $294,874, this project costs about 0.6% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Sump Pump Installation in Tampa, FL — Costs $672 to $4,479

What does sump pump installation cost in Tampa? Average $1,680, ranging $672–$4,479. Labor runs $34.39/hr locally — 12% above the national average. Free breakdown with material + labor split.

Tampa, FL Market

+12% vs national

Labor Rate

$34.39/hr

Material Index

108

Avg Permit Cost

$1,076

Median Home Price

$294,874

Tampa is a mid-sized city in Florida with a healthy pool of local contractors. Homeowners generally have several options to compare for a sump pump installation, which helps keep pricing competitive. Costs in Tampa run slightly above the national average, though the gap is modest enough that smart material choices and timing can close it. The median home in Tampa is valued at $294,874, putting this project at about 0.6% of home value — a moderate investment with a projected 45% ROI.

Low Estimate

$672

National: $600

Mid-Range

$1,680

National: $1,500

High End

$4,479

National: $4,000

Per Sq Ft

National: $0

Duration: 4-8 hours

DIY: Hard

Permits: Required

ROI: 45%

Sump Pump Installation Cost Calculator for Tampa

Adjusted for Tampa's labor rate ($34.39/hr) and material costs (index 108).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Tampa

$1,613

Based on 200 sq ft at mid quality, adjusted for Tampa market rates.

Local Cost Breakdown

Labor (60%)$1,008

At Tampa's average rate of $34.39/hr (15% above national avg)

Materials (40%)$672

Material cost index 108 (8% above national baseline of 100)

Sump Pump Installation vs. Home Value in Tampa

Metric	Tampa	National Avg
Sump Pump Installation (Mid-Range)	$1,680	$1,500
Median Home Price	$294,874	$350,000
Project as % of Home Value	0.6%	0.4%
Estimated ROI	45%	45%
Median Household Income	$52,975	$75,000

What Affects the Price in Tampa

1Local labor rates ($34.39/hr in Tampa)
2Material cost index (108 vs national 100)
3Basin size
4Submersible vs pedestal pump
5Horsepower rating
6Battery backup

Popular Upgrades

Battery backup system
Water alarm sensor
Wi-Fi monitoring

Other Projects in Tampa, FL

Whole House Generator Installation

$16,648

HardROI 55%

HVAC System Replacement

$13,278

HardROI 50%

Whole House Plumbing Repiping

$11,231

HardROI 45%

Spray Foam Insulation

$8,932

HardROI 60%

Second Story Addition

$222,633

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$166,975

HardROI 80%

Room Addition

$100,185

HardROI 55%

Home Addition

$88,788

MediumROI 60%

Sump Pump Installation in Other Florida Cities

Jacksonville, FL

$1,586

-6%Pop. 949,611

Miami, FL

$1,758

+5%Pop. 442,241

Orlando, FL

$1,681

SamePop. 307,573

St. Petersburg, FL

$1,405

-16%Pop. 258,308

Hialeah, FL

$2,035

+21%Pop. 223,109

Port St. Lucie, FL

$1,396

-17%Pop. 217,665

Tallahassee, FL

$1,479

-12%Pop. 196,169

Cape Coral, FL

$1,450

-14%Pop. 194,016

Planning a Sump Pump Installation in Tampa

Building permits are typically required for a sump pump installation in Tampa. The average permit fee in this area is $1,076, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 4-8 hours from start to finish.

A sump pump installation is a complex project best left to licensed professionals. In Tampa, skilled contractors charge an average of $34.39/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

For the median Tampa household earning $52,975/year, this project at $1,680 represents a significant investment. Consider financing options or phasing the work to spread costs over time.

Sump Pump Installation — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Tampa

View labor rates, material costs, and project estimates for Tampa, FL.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs