How much does a sump pump installation cost in Tacoma, WA?

The average sump pump installation in Tacoma, WA costs $1,819 in 2026. Costs range from $727 for a basic project to $4,850 for a high-end renovation. Tacoma is 21% more expensive than the national average of $1,500.

What is the labor rate for contractors in Tacoma?

The average contractor labor rate in Tacoma, WA is $37.62/hour, compared to the national average of $30/hour. For a sump pump installation, labor typically accounts for 60% of the total cost, which is approximately $1,091 in Tacoma.

Are materials more expensive in Tacoma?

Tacoma has a material cost index of 115 (national average = 100). Materials cost about 15% more than the national average. For a sump pump installation, materials account for 40% of the cost, approximately $728.

Do I need a permit for a sump pump installation in Tacoma?

Yes, a sump pump installation typically requires building permits in Tacoma, WA. The average permit cost in Tacoma is $1,336. Always confirm requirements with the Tacoma building department before starting work.

Is a sump pump installation a good investment in Tacoma?

A sump pump installation provides an estimated 45% ROI nationally. In Tacoma, where the median home price is $501,552, this project costs about 0.4% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Sump Pump Installation in Tacoma, WA — Costs $727 to $4,850

What does sump pump installation cost in Tacoma? Average $1,819, ranging $727–$4,850. Labor runs $37.62/hr locally — 21% above the national average. Free breakdown with material + labor split.

Tacoma, WA Market

+21% vs national

Labor Rate

$37.62/hr

Material Index

115

Avg Permit Cost

$1,336

Median Home Price

$501,552

Tacoma is a mid-sized city in Washington with a healthy pool of local contractors. Homeowners generally have several options to compare for a sump pump installation, which helps keep pricing competitive. At 21% above the national average, Tacoma is one of the more expensive markets for home improvement — driven primarily by above-average labor rates in the region. With a median home price of $501,552, this sump pump installation represents just 0.4% of typical home value — a relatively small investment that can significantly boost curb appeal or functionality.

Low Estimate

$727

National: $600

Mid-Range

$1,819

National: $1,500

High End

$4,850

National: $4,000

Per Sq Ft

National: $0

Duration: 4-8 hours

DIY: Hard

Permits: Required

ROI: 45%

Sump Pump Installation Cost Calculator for Tacoma

Adjusted for Tacoma's labor rate ($37.62/hr) and material costs (index 115).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Tacoma

$1,746

Based on 200 sq ft at mid quality, adjusted for Tacoma market rates.

Local Cost Breakdown

Labor (60%)$1,091

At Tacoma's average rate of $37.62/hr (25% above national avg)

Materials (40%)$728

Material cost index 115 (15% above national baseline of 100)

Sump Pump Installation vs. Home Value in Tacoma

Metric	Tacoma	National Avg
Sump Pump Installation (Mid-Range)	$1,819	$1,500
Median Home Price	$501,552	$350,000
Project as % of Home Value	0.4%	0.4%
Estimated ROI	45%	45%
Median Household Income	$78,142	$75,000

What Affects the Price in Tacoma

1Local labor rates ($37.62/hr in Tacoma)
2Material cost index (115 vs national 100)
3Basin size
4Submersible vs pedestal pump
5Horsepower rating
6Battery backup

Popular Upgrades

Battery backup system
Water alarm sensor
Wi-Fi monitoring

Other Projects in Tacoma, WA

Whole House Generator Installation

$17,952

HardROI 55%

HVAC System Replacement

$14,299

HardROI 50%

Whole House Plumbing Repiping

$12,176

HardROI 45%

Spray Foam Insulation

$9,658

HardROI 60%

Second Story Addition

$240,400

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$180,300

HardROI 80%

Room Addition

$108,180

HardROI 55%

Home Addition

$95,744

MediumROI 60%

Sump Pump Installation in Other Washington Cities

Seattle, WA

$2,326

+28%Pop. 737,015

Spokane, WA

$2,102

+16%Pop. 228,989

Vancouver, WA

$1,978

+9%Pop. 190,915

Bellevue, WA

$2,284

+26%Pop. 151,854

Kent, WA

$1,811

SamePop. 136,588

Everett, WA

$1,996

+10%Pop. 110,629

Renton, WA

$2,087

+15%Pop. 106,785

Spokane Valley, WA

$2,089

+15%Pop. 103,597

Planning a Sump Pump Installation in Tacoma

Building permits are typically required for a sump pump installation in Tacoma. The average permit fee in this area is $1,336, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 4-8 hours from start to finish.

A sump pump installation is a complex project best left to licensed professionals. In Tacoma, skilled contractors charge an average of $37.62/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

For the median Tacoma household earning $78,142/year, this project at $1,819 represents a significant investment. Consider financing options or phasing the work to spread costs over time.

Sump Pump Installation — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Tacoma

View labor rates, material costs, and project estimates for Tacoma, WA.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs