Sump Pump Installation in Silver Spring, MD — Costs $830 to $5,535
What does sump pump installation cost in Silver Spring? Average $2,076, ranging $830–$5,535. Labor runs $44.59/hr locally — 38% above the national average. Free breakdown with material + labor split.
Silver Spring, MD Market
+38% vs nationalLabor Rate
$44.59/hr
Material Index
123
Avg Permit Cost
$1,518
Median Home Price
$465,000
In a smaller market like Silver Spring, Maryland, the pool of contractors specializing in sump pump installation may be more limited. Getting 3+ quotes is especially important to ensure fair pricing. At 38% above the national average, Silver Spring is one of the more expensive markets for home improvement — driven primarily by above-average labor rates in the region. The median home in Silver Spring is valued at $465,000, putting this project at about 0.4% of home value — a moderate investment with a projected 45% ROI.
Low Estimate
$830
National: $600
Mid-Range
$2,076
National: $1,500
High End
$5,535
National: $4,000
Per Sq Ft
$0
National: $0
Sump Pump Installation Cost Calculator for Silver Spring
Adjusted for Silver Spring's labor rate ($44.59/hr) and material costs (index 123).
Mid-grade materials, good quality fixtures, standard options.
Estimated Total in Silver Spring
$1,993
Based on 200 sq ft at mid quality, adjusted for Silver Spring market rates.
Local Cost Breakdown
At Silver Spring's average rate of $44.59/hr (49% above national avg)
Material cost index 123 (23% above national baseline of 100)
Sump Pump Installation vs. Home Value in Silver Spring
| Metric | Silver Spring | National Avg |
|---|---|---|
| Sump Pump Installation (Mid-Range) | $2,076 | $1,500 |
| Median Home Price | $465,000 | $350,000 |
| Project as % of Home Value | 0.4% | 0.4% |
| Estimated ROI | 45% | 45% |
| Median Household Income | $78,000 | $75,000 |
What Affects the Price in Silver Spring
- 1Local labor rates ($44.59/hr in Silver Spring)
- 2Material cost index (123 vs national 100)
- 3Basin size
- 4Submersible vs pedestal pump
- 5Horsepower rating
- 6Battery backup
Popular Upgrades
- Battery backup system
- Water alarm sensor
- Wi-Fi monitoring
Other Projects in Silver Spring, MD
Whole House Generator Installation
$20,180
HVAC System Replacement
$15,990
Whole House Plumbing Repiping
$13,966
Spray Foam Insulation
$10,968
Second Story Addition
$271,633
Accessory Dwelling Unit (ADU) Construction
$203,725
Room Addition
$122,235
Home Addition
$107,628
Sump Pump Installation in Other Maryland Cities
Planning a Sump Pump Installation in Silver Spring
Building permits are typically required for a sump pump installation in Silver Spring. The average permit fee in this area is $1,518, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 4-8 hours from start to finish.
A sump pump installation is a complex project best left to licensed professionals. In Silver Spring, skilled contractors charge an average of $44.59/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.
For the median Silver Spring household earning $78,000/year, this project at $2,076 represents a significant investment. Consider financing options or phasing the work to spread costs over time.
Sump Pump Installation — National Guide
See the full national cost guide with DIY tips, cost factors, and ROI analysis.
All Construction Costs in Silver Spring
View labor rates, material costs, and project estimates for Silver Spring, MD.
Explore All Project Cost Guides
Compare costs across 120+ home improvement projects in 3,636 cities nationwide.
View All Project Costs