How much does a sump pump installation cost in Seattle, WA?

The average sump pump installation in Seattle, WA costs $2,326 in 2026. Costs range from $930 for a basic project to $6,202 for a high-end renovation. Seattle is 55% more expensive than the national average of $1,500.

What is the labor rate for contractors in Seattle?

The average contractor labor rate in Seattle, WA is $49.93/hour, compared to the national average of $30/hour. For a sump pump installation, labor typically accounts for 60% of the total cost, which is approximately $1,396 in Seattle.

Are materials more expensive in Seattle?

Seattle has a material cost index of 138 (national average = 100). Materials cost about 38% more than the national average. For a sump pump installation, materials account for 40% of the cost, approximately $930.

Do I need a permit for a sump pump installation in Seattle?

Yes, a sump pump installation typically requires building permits in Seattle, WA. The average permit cost in Seattle is $2,240. Always confirm requirements with the Seattle building department before starting work.

Is a sump pump installation a good investment in Seattle?

A sump pump installation provides an estimated 45% ROI nationally. In Seattle, where the median home price is $616,441, this project costs about 0.4% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Sump Pump Installation in Seattle, WA — Costs $930 to $6,202

What does sump pump installation cost in Seattle? Average $2,326, ranging $930–$6,202. Labor runs $49.93/hr locally — 55% above the national average. Free breakdown with material + labor split.

Seattle, WA Market

+55% vs national

Labor Rate

$49.93/hr

Material Index

138

Avg Permit Cost

$2,240

Median Home Price

$616,441

As one of the largest metros in Washington, Seattle has a competitive contractor market with hundreds of licensed professionals. This typically gives homeowners more leverage on pricing, though high demand for renovations can offset that advantage. At 55% above the national average, Seattle is one of the more expensive markets for home improvement — driven primarily by above-average labor rates in the region. With a median home price of $616,441, this sump pump installation represents just 0.4% of typical home value — a relatively small investment that can significantly boost curb appeal or functionality.

Low Estimate

$930

National: $600

Mid-Range

$2,326

National: $1,500

High End

$6,202

National: $4,000

Per Sq Ft

National: $0

Duration: 4-8 hours

DIY: Hard

Permits: Required

ROI: 45%

Sump Pump Installation Cost Calculator for Seattle

Adjusted for Seattle's labor rate ($49.93/hr) and material costs (index 138).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Seattle

$2,233

Based on 200 sq ft at mid quality, adjusted for Seattle market rates.

Local Cost Breakdown

Labor (60%)$1,396

At Seattle's average rate of $49.93/hr (66% above national avg)

Materials (40%)$930

Material cost index 138 (38% above national baseline of 100)

Sump Pump Installation vs. Home Value in Seattle

Metric	Seattle	National Avg
Sump Pump Installation (Mid-Range)	$2,326	$1,500
Median Home Price	$616,441	$350,000
Project as % of Home Value	0.4%	0.4%
Estimated ROI	45%	45%
Median Household Income	$106,476	$75,000

What Affects the Price in Seattle

1Local labor rates ($49.93/hr in Seattle)
2Material cost index (138 vs national 100)
3Basin size
4Submersible vs pedestal pump
5Horsepower rating
6Battery backup

Popular Upgrades

Battery backup system
Water alarm sensor
Wi-Fi monitoring

Other Projects in Seattle, WA

Whole House Generator Installation

$22,619

HardROI 55%

HVAC System Replacement

$17,925

HardROI 50%

Whole House Plumbing Repiping

$15,648

HardROI 45%

Spray Foam Insulation

$12,291

HardROI 60%

Second Story Addition

$304,433

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$228,325

HardROI 80%

Room Addition

$136,995

HardROI 55%

Home Addition

$120,636

MediumROI 60%

Sump Pump Installation in Other Washington Cities

Spokane, WA

$2,102

-10%Pop. 228,989

Tacoma, WA

$1,819

-22%Pop. 219,346

Vancouver, WA

$1,978

-15%Pop. 190,915

Bellevue, WA

$2,284

-2%Pop. 151,854

Kent, WA

$1,811

-22%Pop. 136,588

Everett, WA

$1,996

-14%Pop. 110,629

Renton, WA

$2,087

-10%Pop. 106,785

Spokane Valley, WA

$2,089

-10%Pop. 103,597

Planning a Sump Pump Installation in Seattle

Building permits are typically required for a sump pump installation in Seattle. The average permit fee in this area is $2,240, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 4-8 hours from start to finish.

A sump pump installation is a complex project best left to licensed professionals. In Seattle, skilled contractors charge an average of $49.93/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

With a median household income of $106,476, many Seattle residents can budget for this project through savings. The mid-range cost of $2,326 represents 2% of the typical household's annual income.

Sump Pump Installation — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Seattle

View labor rates, material costs, and project estimates for Seattle, WA.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs