How much does a sump pump installation cost in Rockford, IL?

The average sump pump installation in Rockford, IL costs $1,622 in 2026. Costs range from $649 for a basic project to $4,325 for a high-end renovation. Rockford is 8% more expensive than the national average of $1,500.

What is the labor rate for contractors in Rockford?

The average contractor labor rate in Rockford, IL is $33.06/hour, compared to the national average of $30/hour. For a sump pump installation, labor typically accounts for 60% of the total cost, which is approximately $973 in Rockford.

Are materials more expensive in Rockford?

Rockford has a material cost index of 105 (national average = 100). Materials cost about 5% more than the national average. For a sump pump installation, materials account for 40% of the cost, approximately $649.

Do I need a permit for a sump pump installation in Rockford?

Yes, a sump pump installation typically requires building permits in Rockford, IL. The average permit cost in Rockford is $950. Always confirm requirements with the Rockford building department before starting work.

Is a sump pump installation a good investment in Rockford?

A sump pump installation provides an estimated 45% ROI nationally. In Rockford, where the median home price is $192,877, this project costs about 0.8% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Sump Pump Installation in Rockford, IL — Costs $649 to $4,325

What does sump pump installation cost in Rockford? Average $1,622, ranging $649–$4,325. Labor runs $33.06/hr locally — 8% above the national average. Free breakdown with material + labor split.

Rockford, IL Market

+8% vs national

Labor Rate

$33.06/hr

Material Index

105

Avg Permit Cost

$950

Median Home Price

$192,877

Rockford is a mid-sized city in Illinois with a healthy pool of local contractors. Homeowners generally have several options to compare for a sump pump installation, which helps keep pricing competitive. Costs in Rockford run slightly above the national average, though the gap is modest enough that smart material choices and timing can close it. At a median home price of $192,877, homeowners in Rockford should weigh the project cost (0.8% of home value) carefully against expected returns to avoid over-improving for the local market.

Low Estimate

$649

National: $600

Mid-Range

$1,622

National: $1,500

High End

$4,325

National: $4,000

Per Sq Ft

National: $0

Duration: 4-8 hours

DIY: Hard

Permits: Required

ROI: 45%

Sump Pump Installation Cost Calculator for Rockford

Adjusted for Rockford's labor rate ($33.06/hr) and material costs (index 105).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Rockford

$1,557

Based on 200 sq ft at mid quality, adjusted for Rockford market rates.

Local Cost Breakdown

Labor (60%)$973

At Rockford's average rate of $33.06/hr (10% above national avg)

Materials (40%)$649

Material cost index 105 (5% above national baseline of 100)

Sump Pump Installation vs. Home Value in Rockford

Metric	Rockford	National Avg
Sump Pump Installation (Mid-Range)	$1,622	$1,500
Median Home Price	$192,877	$350,000
Project as % of Home Value	0.8%	0.4%
Estimated ROI	45%	45%
Median Household Income	$46,874	$75,000

What Affects the Price in Rockford

1Local labor rates ($33.06/hr in Rockford)
2Material cost index (105 vs national 100)
3Basin size
4Submersible vs pedestal pump
5Horsepower rating
6Battery backup

Popular Upgrades

Battery backup system
Water alarm sensor
Wi-Fi monitoring

Other Projects in Rockford, IL

Whole House Generator Installation

$16,101

HardROI 55%

HVAC System Replacement

$12,850

HardROI 50%

Whole House Plumbing Repiping

$10,838

HardROI 45%

Spray Foam Insulation

$8,629

HardROI 60%

Second Story Addition

$215,200

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$161,400

HardROI 80%

Room Addition

$96,840

HardROI 55%

Home Addition

$85,872

MediumROI 60%

Sump Pump Installation in Other Illinois Cities

Chicago, IL

$2,105

+30%Pop. 2,693,976

Aurora, IL

$1,807

+11%Pop. 180,542

Joliet, IL

$1,635

+1%Pop. 150,362

Naperville, IL

$1,877

+16%Pop. 149,540

Elgin, IL

$1,848

+14%Pop. 114,797

Springfield, IL

$1,861

+15%Pop. 114,394

Peoria, IL

$1,785

+10%Pop. 113,150

Waukegan, IL

$1,595

-2%Pop. 89,078

Planning a Sump Pump Installation in Rockford

Building permits are typically required for a sump pump installation in Rockford. The average permit fee in this area is $950, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 4-8 hours from start to finish.

A sump pump installation is a complex project best left to licensed professionals. In Rockford, skilled contractors charge an average of $33.06/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

In Rockford, where the median household income is $46,874, a $1,622 project requires careful budgeting. Look into home improvement loans, HELOC options, or local grants that may be available in Illinois.

Sump Pump Installation — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Rockford

View labor rates, material costs, and project estimates for Rockford, IL.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs