How much does a sump pump installation cost in Raleigh, NC?

The average sump pump installation in Raleigh, NC costs $1,459 in 2026. Costs range from $583 for a basic project to $3,890 for a high-end renovation. Raleigh is 3% less expensive than the national average of $1,500.

What is the labor rate for contractors in Raleigh?

The average contractor labor rate in Raleigh, NC is $29.42/hour, compared to the national average of $30/hour. For a sump pump installation, labor typically accounts for 60% of the total cost, which is approximately $875 in Raleigh.

Are materials more expensive in Raleigh?

Raleigh has a material cost index of 96 (national average = 100). Materials cost about 4% less than the national average. For a sump pump installation, materials account for 40% of the cost, approximately $584.

Do I need a permit for a sump pump installation in Raleigh?

Yes, a sump pump installation typically requires building permits in Raleigh, NC. The average permit cost in Raleigh is $956. Always confirm requirements with the Raleigh building department before starting work.

Is a sump pump installation a good investment in Raleigh?

A sump pump installation provides an estimated 45% ROI nationally. In Raleigh, where the median home price is $251,335, this project costs about 0.6% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Sump Pump Installation in Raleigh, NC — Costs $583 to $3,890

What does sump pump installation cost in Raleigh? Average $1,459, ranging $583–$3,890. Labor runs $29.42/hr locally — 3% below the national average. Free breakdown with material + labor split.

Raleigh, NC Market

-3% vs national

Labor Rate

$29.42/hr

Material Index

Avg Permit Cost

$956

Median Home Price

$251,335

Raleigh is a mid-sized city in North Carolina with a healthy pool of local contractors. Homeowners generally have several options to compare for a sump pump installation, which helps keep pricing competitive. Raleigh offers slightly below-average renovation costs, giving homeowners a small cost advantage compared to most US markets. The median home in Raleigh is valued at $251,335, putting this project at about 0.6% of home value — a moderate investment with a projected 45% ROI.

Low Estimate

$583

National: $600

Mid-Range

$1,459

National: $1,500

High End

$3,890

National: $4,000

Per Sq Ft

National: $0

Duration: 4-8 hours

DIY: Hard

Permits: Required

ROI: 45%

Sump Pump Installation Cost Calculator for Raleigh

Adjusted for Raleigh's labor rate ($29.42/hr) and material costs (index 96).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Raleigh

$1,401

Based on 200 sq ft at mid quality, adjusted for Raleigh market rates.

Local Cost Breakdown

Labor (60%)$875

At Raleigh's average rate of $29.42/hr (2% below national avg)

Materials (40%)$584

Material cost index 96 (4% below national baseline of 100)

Sump Pump Installation vs. Home Value in Raleigh

Metric	Raleigh	National Avg
Sump Pump Installation (Mid-Range)	$1,459	$1,500
Median Home Price	$251,335	$350,000
Project as % of Home Value	0.6%	0.4%
Estimated ROI	45%	45%
Median Household Income	$50,826	$75,000

What Affects the Price in Raleigh

1Local labor rates ($29.42/hr in Raleigh)
2Material cost index (96 vs national 100)
3Basin size
4Submersible vs pedestal pump
5Horsepower rating
6Battery backup

Popular Upgrades

Battery backup system
Water alarm sensor
Wi-Fi monitoring

Other Projects in Raleigh, NC

Whole House Generator Installation

$14,540

HardROI 55%

HVAC System Replacement

$11,619

HardROI 50%

Whole House Plumbing Repiping

$9,734

HardROI 45%

Spray Foam Insulation

$7,771

HardROI 60%

Second Story Addition

$194,067

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$145,550

HardROI 80%

Room Addition

$87,330

HardROI 55%

Home Addition

$77,544

MediumROI 60%

Sump Pump Installation in Other North Carolina Cities

Charlotte, NC

$1,477

+1%Pop. 874,579

Greensboro, NC

$1,439

-1%Pop. 299,035

Durham, NC

$1,324

-9%Pop. 283,506

Winston-Salem, NC

$1,286

-12%Pop. 249,545

Fayetteville, NC

$1,451

-1%Pop. 208,501

Cary, NC

$1,280

-12%Pop. 174,721

Wilmington, NC

$1,343

-8%Pop. 122,162

High Point, NC

$1,691

+16%Pop. 112,791

Planning a Sump Pump Installation in Raleigh

Building permits are typically required for a sump pump installation in Raleigh. The average permit fee in this area is $956, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 4-8 hours from start to finish.

A sump pump installation is a complex project best left to licensed professionals. In Raleigh, skilled contractors charge an average of $29.42/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

For the median Raleigh household earning $50,826/year, this project at $1,459 represents a significant investment. Consider financing options or phasing the work to spread costs over time.

Sump Pump Installation — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Raleigh

View labor rates, material costs, and project estimates for Raleigh, NC.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs