How much does a sump pump installation cost in Phoenix, AZ?

The average sump pump installation in Phoenix, AZ costs $1,561 in 2026. Costs range from $624 for a basic project to $4,162 for a high-end renovation. Phoenix is 4% more expensive than the national average of $1,500.

What is the labor rate for contractors in Phoenix?

The average contractor labor rate in Phoenix, AZ is $31.43/hour, compared to the national average of $30/hour. For a sump pump installation, labor typically accounts for 60% of the total cost, which is approximately $937 in Phoenix.

Are materials more expensive in Phoenix?

Phoenix has a material cost index of 103 (national average = 100). Materials cost about 3% more than the national average. For a sump pump installation, materials account for 40% of the cost, approximately $624.

Do I need a permit for a sump pump installation in Phoenix?

Yes, a sump pump installation typically requires building permits in Phoenix, AZ. The average permit cost in Phoenix is $1,721. Always confirm requirements with the Phoenix building department before starting work.

Is a sump pump installation a good investment in Phoenix?

A sump pump installation provides an estimated 45% ROI nationally. In Phoenix, where the median home price is $391,265, this project costs about 0.4% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Sump Pump Installation in Phoenix, AZ — Costs $624 to $4,162

What does sump pump installation cost in Phoenix? Average $1,561, ranging $624–$4,162. Labor runs $31.43/hr locally — 4% above the national average. Free breakdown with material + labor split.

Phoenix, AZ Market

+4% vs national

Labor Rate

$31.43/hr

Material Index

103

Avg Permit Cost

$1,721

Median Home Price

$391,265

As one of the largest metros in Arizona, Phoenix has a competitive contractor market with hundreds of licensed professionals. This typically gives homeowners more leverage on pricing, though high demand for renovations can offset that advantage. Costs in Phoenix run slightly above the national average, though the gap is modest enough that smart material choices and timing can close it. The median home in Phoenix is valued at $391,265, putting this project at about 0.4% of home value — a moderate investment with a projected 45% ROI.

Low Estimate

$624

National: $600

Mid-Range

$1,561

National: $1,500

High End

$4,162

National: $4,000

Per Sq Ft

National: $0

Duration: 4-8 hours

DIY: Hard

Permits: Required

ROI: 45%

Sump Pump Installation Cost Calculator for Phoenix

Adjusted for Phoenix's labor rate ($31.43/hr) and material costs (index 103).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Phoenix

$1,499

Based on 200 sq ft at mid quality, adjusted for Phoenix market rates.

Local Cost Breakdown

Labor (60%)$937

At Phoenix's average rate of $31.43/hr (5% above national avg)

Materials (40%)$624

Material cost index 103 (3% above national baseline of 100)

Sump Pump Installation vs. Home Value in Phoenix

Metric	Phoenix	National Avg
Sump Pump Installation (Mid-Range)	$1,561	$1,500
Median Home Price	$391,265	$350,000
Project as % of Home Value	0.4%	0.4%
Estimated ROI	45%	45%
Median Household Income	$81,769	$75,000

What Affects the Price in Phoenix

1Local labor rates ($31.43/hr in Phoenix)
2Material cost index (103 vs national 100)
3Basin size
4Submersible vs pedestal pump
5Horsepower rating
6Battery backup

Popular Upgrades

Battery backup system
Water alarm sensor
Wi-Fi monitoring

Other Projects in Phoenix, AZ

Whole House Generator Installation

$15,569

HardROI 55%

HVAC System Replacement

$12,445

HardROI 50%

Whole House Plumbing Repiping

$10,415

HardROI 45%

Spray Foam Insulation

$8,318

HardROI 60%

Second Story Addition

$207,767

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$155,825

HardROI 80%

Room Addition

$93,495

HardROI 55%

Home Addition

$83,036

MediumROI 60%

Sump Pump Installation in Other Arizona Cities

Tucson, AZ

$1,472

-6%Pop. 542,629

Mesa, AZ

$1,506

-4%Pop. 504,258

Chandler, AZ

$1,559

SamePop. 275,987

Gilbert, AZ

$1,993

+28%Pop. 267,918

Glendale, AZ

$1,400

-10%Pop. 248,325

Scottsdale, AZ

$1,652

+6%Pop. 241,361

Peoria, AZ

$1,452

-7%Pop. 190,985

Tempe, AZ

$1,430

-8%Pop. 180,587

Planning a Sump Pump Installation in Phoenix

Building permits are typically required for a sump pump installation in Phoenix. The average permit fee in this area is $1,721, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 4-8 hours from start to finish.

A sump pump installation is a complex project best left to licensed professionals. In Phoenix, skilled contractors charge an average of $31.43/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

With a median household income of $81,769, many Phoenix residents can budget for this project through savings. The mid-range cost of $1,561 represents 2% of the typical household's annual income.

Sump Pump Installation — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Phoenix

View labor rates, material costs, and project estimates for Phoenix, AZ.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs