How much does a sump pump installation cost in Parma, OH?

The average sump pump installation in Parma, OH costs $1,387 in 2026. Costs range from $555 for a basic project to $3,698 for a high-end renovation. Parma is 8% less expensive than the national average of $1,500.

What is the labor rate for contractors in Parma?

The average contractor labor rate in Parma, OH is $28.02/hour, compared to the national average of $30/hour. For a sump pump installation, labor typically accounts for 60% of the total cost, which is approximately $832 in Parma.

Are materials more expensive in Parma?

Parma has a material cost index of 91 (national average = 100). Materials cost about 9% less than the national average. For a sump pump installation, materials account for 40% of the cost, approximately $555.

Do I need a permit for a sump pump installation in Parma?

Yes, a sump pump installation typically requires building permits in Parma, OH. The average permit cost in Parma is $1,025. Always confirm requirements with the Parma building department before starting work.

Is a sump pump installation a good investment in Parma?

A sump pump installation provides an estimated 45% ROI nationally. In Parma, where the median home price is $193,569, this project costs about 0.7% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Sump Pump Installation in Parma, OH — Costs $555 to $3,698

What does sump pump installation cost in Parma? Average $1,387, ranging $555–$3,698. Labor runs $28.02/hr locally — 8% below the national average. Free breakdown with material + labor split.

Parma, OH Market

-8% vs national

Labor Rate

$28.02/hr

Material Index

Avg Permit Cost

$1,025

Median Home Price

$193,569

In a smaller market like Parma, Ohio, the pool of contractors specializing in sump pump installation may be more limited. Getting 3+ quotes is especially important to ensure fair pricing. Parma offers slightly below-average renovation costs, giving homeowners a small cost advantage compared to most US markets. At a median home price of $193,569, homeowners in Parma should weigh the project cost (0.7% of home value) carefully against expected returns to avoid over-improving for the local market.

Low Estimate

$555

National: $600

Mid-Range

$1,387

National: $1,500

High End

$3,698

National: $4,000

Per Sq Ft

National: $0

Duration: 4-8 hours

DIY: Hard

Permits: Required

ROI: 45%

Sump Pump Installation Cost Calculator for Parma

Adjusted for Parma's labor rate ($28.02/hr) and material costs (index 91).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Parma

$1,332

Based on 200 sq ft at mid quality, adjusted for Parma market rates.

Local Cost Breakdown

Labor (60%)$832

At Parma's average rate of $28.02/hr (7% below national avg)

Materials (40%)$555

Material cost index 91 (9% below national baseline of 100)

Sump Pump Installation vs. Home Value in Parma

Metric	Parma	National Avg
Sump Pump Installation (Mid-Range)	$1,387	$1,500
Median Home Price	$193,569	$350,000
Project as % of Home Value	0.7%	0.4%
Estimated ROI	45%	45%
Median Household Income	$52,851	$75,000

What Affects the Price in Parma

1Local labor rates ($28.02/hr in Parma)
2Material cost index (91 vs national 100)
3Basin size
4Submersible vs pedestal pump
5Horsepower rating
6Battery backup

Popular Upgrades

Battery backup system
Water alarm sensor
Wi-Fi monitoring

Other Projects in Parma, OH

Whole House Generator Installation

$13,812

HardROI 55%

HVAC System Replacement

$11,035

HardROI 50%

Whole House Plumbing Repiping

$9,256

HardROI 45%

Spray Foam Insulation

$7,386

HardROI 60%

Second Story Addition

$184,400

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$138,300

HardROI 80%

Room Addition

$82,980

HardROI 55%

Home Addition

$73,664

MediumROI 60%

Sump Pump Installation in Other Ohio Cities

Columbus, OH

$1,573

+13%Pop. 905,748

Cleveland, OH

$1,513

+9%Pop. 372,624

Cincinnati, OH

$1,586

+14%Pop. 309,317

Toledo, OH

$1,516

+9%Pop. 270,871

Akron, OH

$1,511

+9%Pop. 190,469

Dayton, OH

$1,392

SamePop. 137,644

Canton, OH

$1,237

-11%Pop. 70,458

Lorain, OH

$1,334

-4%Pop. 65,211

Planning a Sump Pump Installation in Parma

Building permits are typically required for a sump pump installation in Parma. The average permit fee in this area is $1,025, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 4-8 hours from start to finish.

A sump pump installation is a complex project best left to licensed professionals. In Parma, skilled contractors charge an average of $28.02/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

For the median Parma household earning $52,851/year, this project at $1,387 represents a significant investment. Consider financing options or phasing the work to spread costs over time.

Sump Pump Installation — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Parma

View labor rates, material costs, and project estimates for Parma, OH.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs