How much does a sump pump installation cost in Irvine, CA?

The average sump pump installation in Irvine, CA costs $2,553 in 2026. Costs range from $1,021 for a basic project to $6,808 for a high-end renovation. Irvine is 70% more expensive than the national average of $1,500.

What is the labor rate for contractors in Irvine?

The average contractor labor rate in Irvine, CA is $55.7/hour, compared to the national average of $30/hour. For a sump pump installation, labor typically accounts for 60% of the total cost, which is approximately $1,532 in Irvine.

Are materials more expensive in Irvine?

Irvine has a material cost index of 147 (national average = 100). Materials cost about 47% more than the national average. For a sump pump installation, materials account for 40% of the cost, approximately $1,021.

Do I need a permit for a sump pump installation in Irvine?

Yes, a sump pump installation typically requires building permits in Irvine, CA. The average permit cost in Irvine is $2,271. Always confirm requirements with the Irvine building department before starting work.

Is a sump pump installation a good investment in Irvine?

A sump pump installation provides an estimated 45% ROI nationally. In Irvine, where the median home price is $718,221, this project costs about 0.4% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Sump Pump Installation in Irvine, CA — Costs $1,021 to $6,808

What does sump pump installation cost in Irvine? Average $2,553, ranging $1,021–$6,808. Labor runs $55.7/hr locally — 70% above the national average. Free breakdown with material + labor split.

Irvine, CA Market

+70% vs national

Labor Rate

$55.7/hr

Material Index

147

Avg Permit Cost

$2,271

Median Home Price

$718,221

Irvine is a mid-sized city in California with a healthy pool of local contractors. Homeowners generally have several options to compare for a sump pump installation, which helps keep pricing competitive. At 70% above the national average, Irvine is one of the more expensive markets for home improvement — driven primarily by above-average labor rates in the region. With a median home price of $718,221, this sump pump installation represents just 0.4% of typical home value — a relatively small investment that can significantly boost curb appeal or functionality.

Low Estimate

$1,021

National: $600

Mid-Range

$2,553

National: $1,500

High End

$6,808

National: $4,000

Per Sq Ft

National: $0

Duration: 4-8 hours

DIY: Hard

Permits: Required

ROI: 45%

Sump Pump Installation Cost Calculator for Irvine

Adjusted for Irvine's labor rate ($55.7/hr) and material costs (index 147).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Irvine

$2,451

Based on 200 sq ft at mid quality, adjusted for Irvine market rates.

Local Cost Breakdown

Labor (60%)$1,532

At Irvine's average rate of $55.7/hr (86% above national avg)

Materials (40%)$1,021

Material cost index 147 (47% above national baseline of 100)

Sump Pump Installation vs. Home Value in Irvine

Metric	Irvine	National Avg
Sump Pump Installation (Mid-Range)	$2,553	$1,500
Median Home Price	$718,221	$350,000
Project as % of Home Value	0.4%	0.4%
Estimated ROI	45%	45%
Median Household Income	$106,906	$75,000

What Affects the Price in Irvine

1Local labor rates ($55.7/hr in Irvine)
2Material cost index (147 vs national 100)
3Basin size
4Submersible vs pedestal pump
5Horsepower rating
6Battery backup

Popular Upgrades

Battery backup system
Water alarm sensor
Wi-Fi monitoring

Other Projects in Irvine, CA

Whole House Generator Installation

$24,660

HardROI 55%

HVAC System Replacement

$19,496

HardROI 50%

Whole House Plumbing Repiping

$17,213

HardROI 45%

Spray Foam Insulation

$13,461

HardROI 60%

Second Story Addition

$332,667

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$249,500

HardROI 80%

Room Addition

$149,700

HardROI 55%

Home Addition

$131,520

MediumROI 60%

Sump Pump Installation in Other California Cities

Los Angeles, CA

$2,557

SamePop. 3,979,576

San Diego, CA

$2,545

SamePop. 1,424,116

San Jose, CA

$2,633

+3%Pop. 1,013,240

San Francisco, CA

$2,615

+2%Pop. 873,965

Fresno, CA

$2,319

-9%Pop. 542,107

Sacramento, CA

$2,494

-2%Pop. 524,943

Long Beach, CA

$2,405

-6%Pop. 466,742

Oakland, CA

$2,535

-1%Pop. 433,031

Planning a Sump Pump Installation in Irvine

Building permits are typically required for a sump pump installation in Irvine. The average permit fee in this area is $2,271, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 4-8 hours from start to finish.

A sump pump installation is a complex project best left to licensed professionals. In Irvine, skilled contractors charge an average of $55.7/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

With a median household income of $106,906, many Irvine residents can budget for this project through savings. The mid-range cost of $2,553 represents 2% of the typical household's annual income.

Sump Pump Installation — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Irvine

View labor rates, material costs, and project estimates for Irvine, CA.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs