How much does a sump pump installation cost in Franklin, TN?

The average sump pump installation in Franklin, TN costs $2,035 in 2026. Costs range from $814 for a basic project to $5,426 for a high-end renovation. Franklin is 36% more expensive than the national average of $1,500.

What is the labor rate for contractors in Franklin?

The average contractor labor rate in Franklin, TN is $44.03/hour, compared to the national average of $30/hour. For a sump pump installation, labor typically accounts for 60% of the total cost, which is approximately $1,221 in Franklin.

Are materials more expensive in Franklin?

Franklin has a material cost index of 119 (national average = 100). Materials cost about 19% more than the national average. For a sump pump installation, materials account for 40% of the cost, approximately $814.

Do I need a permit for a sump pump installation in Franklin?

Yes, a sump pump installation typically requires building permits in Franklin, TN. The average permit cost in Franklin is $1,510. Always confirm requirements with the Franklin building department before starting work.

Is a sump pump installation a good investment in Franklin?

A sump pump installation provides an estimated 45% ROI nationally. In Franklin, where the median home price is $620,000, this project costs about 0.3% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Sump Pump Installation in Franklin, TN — Costs $814 to $5,426

What does sump pump installation cost in Franklin? Average $2,035, ranging $814–$5,426. Labor runs $44.03/hr locally — 36% above the national average. Free breakdown with material + labor split.

Franklin, TN Market

+36% vs national

Labor Rate

$44.03/hr

Material Index

119

Avg Permit Cost

$1,510

Median Home Price

$620,000

In a smaller market like Franklin, Tennessee, the pool of contractors specializing in sump pump installation may be more limited. Getting 3+ quotes is especially important to ensure fair pricing. At 36% above the national average, Franklin is one of the more expensive markets for home improvement — driven primarily by above-average labor rates in the region. With a median home price of $620,000, this sump pump installation represents just 0.3% of typical home value — a relatively small investment that can significantly boost curb appeal or functionality.

Low Estimate

$814

National: $600

Mid-Range

$2,035

National: $1,500

High End

$5,426

National: $4,000

Per Sq Ft

National: $0

Duration: 4-8 hours

DIY: Hard

Permits: Required

ROI: 45%

Sump Pump Installation Cost Calculator for Franklin

Adjusted for Franklin's labor rate ($44.03/hr) and material costs (index 119).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Franklin

$1,954

Based on 200 sq ft at mid quality, adjusted for Franklin market rates.

Local Cost Breakdown

Labor (60%)$1,221

At Franklin's average rate of $44.03/hr (47% above national avg)

Materials (40%)$814

Material cost index 119 (19% above national baseline of 100)

Sump Pump Installation vs. Home Value in Franklin

Metric	Franklin	National Avg
Sump Pump Installation (Mid-Range)	$2,035	$1,500
Median Home Price	$620,000	$350,000
Project as % of Home Value	0.3%	0.4%
Estimated ROI	45%	45%
Median Household Income	$98,000	$75,000

What Affects the Price in Franklin

1Local labor rates ($44.03/hr in Franklin)
2Material cost index (119 vs national 100)
3Basin size
4Submersible vs pedestal pump
5Horsepower rating
6Battery backup

Popular Upgrades

Battery backup system
Water alarm sensor
Wi-Fi monitoring

Other Projects in Franklin, TN

Whole House Generator Installation

$19,724

HardROI 55%

HVAC System Replacement

$15,613

HardROI 50%

Whole House Plumbing Repiping

$13,705

HardROI 45%

Spray Foam Insulation

$10,742

HardROI 60%

Second Story Addition

$265,767

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$199,325

HardROI 80%

Room Addition

$119,595

HardROI 55%

Home Addition

$105,196

MediumROI 60%

Sump Pump Installation in Other Tennessee Cities

Nashville, TN

$1,423

-30%Pop. 689,447

Memphis, TN

$1,322

-35%Pop. 633,104

Knoxville, TN

$1,472

-28%Pop. 190,740

Chattanooga, TN

$1,310

-36%Pop. 181,099

Clarksville, TN

$1,486

-27%Pop. 166,722

Murfreesboro, TN

$1,462

-28%Pop. 152,769

Johnson City, TN

$1,684

-17%Pop. 71,046

Jackson, TN

$1,650

-19%Pop. 67,685

Planning a Sump Pump Installation in Franklin

Building permits are typically required for a sump pump installation in Franklin. The average permit fee in this area is $1,510, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 4-8 hours from start to finish.

A sump pump installation is a complex project best left to licensed professionals. In Franklin, skilled contractors charge an average of $44.03/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

With a median household income of $98,000, many Franklin residents can budget for this project through savings. The mid-range cost of $2,035 represents 2% of the typical household's annual income.

Sump Pump Installation — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Franklin

View labor rates, material costs, and project estimates for Franklin, TN.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs