How much does a sump pump installation cost in Fort Worth, TX?

The average sump pump installation in Fort Worth, TX costs $1,647 in 2026. Costs range from $659 for a basic project to $4,393 for a high-end renovation. Fort Worth is 10% more expensive than the national average of $1,500.

What is the labor rate for contractors in Fort Worth?

The average contractor labor rate in Fort Worth, TX is $33.71/hour, compared to the national average of $30/hour. For a sump pump installation, labor typically accounts for 60% of the total cost, which is approximately $988 in Fort Worth.

Are materials more expensive in Fort Worth?

Fort Worth has a material cost index of 106 (national average = 100). Materials cost about 6% more than the national average. For a sump pump installation, materials account for 40% of the cost, approximately $659.

Do I need a permit for a sump pump installation in Fort Worth?

Yes, a sump pump installation typically requires building permits in Fort Worth, TX. The average permit cost in Fort Worth is $1,072. Always confirm requirements with the Fort Worth building department before starting work.

Is a sump pump installation a good investment in Fort Worth?

A sump pump installation provides an estimated 45% ROI nationally. In Fort Worth, where the median home price is $237,053, this project costs about 0.7% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Sump Pump Installation in Fort Worth, TX — Costs $659 to $4,393

What does sump pump installation cost in Fort Worth? Average $1,647, ranging $659–$4,393. Labor runs $33.71/hr locally — 10% above the national average. Free breakdown with material + labor split.

Fort Worth, TX Market

+10% vs national

Labor Rate

$33.71/hr

Material Index

106

Avg Permit Cost

$1,072

Median Home Price

$237,053

As one of the largest metros in Texas, Fort Worth has a competitive contractor market with hundreds of licensed professionals. This typically gives homeowners more leverage on pricing, though high demand for renovations can offset that advantage. Costs in Fort Worth run slightly above the national average, though the gap is modest enough that smart material choices and timing can close it. At a median home price of $237,053, homeowners in Fort Worth should weigh the project cost (0.7% of home value) carefully against expected returns to avoid over-improving for the local market.

Low Estimate

$659

National: $600

Mid-Range

$1,647

National: $1,500

High End

$4,393

National: $4,000

Per Sq Ft

National: $0

Duration: 4-8 hours

DIY: Hard

Permits: Required

ROI: 45%

Sump Pump Installation Cost Calculator for Fort Worth

Adjusted for Fort Worth's labor rate ($33.71/hr) and material costs (index 106).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Fort Worth

$1,581

Based on 200 sq ft at mid quality, adjusted for Fort Worth market rates.

Local Cost Breakdown

Labor (60%)$988

At Fort Worth's average rate of $33.71/hr (12% above national avg)

Materials (40%)$659

Material cost index 106 (6% above national baseline of 100)

Sump Pump Installation vs. Home Value in Fort Worth

Metric	Fort Worth	National Avg
Sump Pump Installation (Mid-Range)	$1,647	$1,500
Median Home Price	$237,053	$350,000
Project as % of Home Value	0.7%	0.4%
Estimated ROI	45%	45%
Median Household Income	$66,671	$75,000

What Affects the Price in Fort Worth

1Local labor rates ($33.71/hr in Fort Worth)
2Material cost index (106 vs national 100)
3Basin size
4Submersible vs pedestal pump
5Horsepower rating
6Battery backup

Popular Upgrades

Battery backup system
Water alarm sensor
Wi-Fi monitoring

Other Projects in Fort Worth, TX

Whole House Generator Installation

$16,330

HardROI 55%

HVAC System Replacement

$13,026

HardROI 50%

Whole House Plumbing Repiping

$11,014

HardROI 45%

Spray Foam Insulation

$8,760

HardROI 60%

Second Story Addition

$218,367

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$163,775

HardROI 80%

Room Addition

$98,265

HardROI 55%

Home Addition

$87,092

MediumROI 60%

Sump Pump Installation in Other Texas Cities

Houston, TX

$1,728

+5%Pop. 2,304,580

San Antonio, TX

$1,530

-7%Pop. 1,547,253

Dallas, TX

$1,754

+6%Pop. 1,304,379

Austin, TX

$1,549

-6%Pop. 978,908

El Paso, TX

$1,401

-15%Pop. 678,815

Arlington, TX

$1,319

-20%Pop. 394,266

Corpus Christi, TX

$1,452

-12%Pop. 317,863

Plano, TX

$1,356

-18%Pop. 288,061

Planning a Sump Pump Installation in Fort Worth

Building permits are typically required for a sump pump installation in Fort Worth. The average permit fee in this area is $1,072, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 4-8 hours from start to finish.

A sump pump installation is a complex project best left to licensed professionals. In Fort Worth, skilled contractors charge an average of $33.71/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

For the median Fort Worth household earning $66,671/year, this project at $1,647 represents a significant investment. Consider financing options or phasing the work to spread costs over time.

Sump Pump Installation — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Fort Worth

View labor rates, material costs, and project estimates for Fort Worth, TX.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs