How much does a sump pump installation cost in Eugene, OR?

The average sump pump installation in Eugene, OR costs $1,692 in 2026. Costs range from $677 for a basic project to $4,511 for a high-end renovation. Eugene is 13% more expensive than the national average of $1,500.

What is the labor rate for contractors in Eugene?

The average contractor labor rate in Eugene, OR is $34.59/hour, compared to the national average of $30/hour. For a sump pump installation, labor typically accounts for 60% of the total cost, which is approximately $1,015 in Eugene.

Are materials more expensive in Eugene?

Eugene has a material cost index of 109 (national average = 100). Materials cost about 9% more than the national average. For a sump pump installation, materials account for 40% of the cost, approximately $677.

Do I need a permit for a sump pump installation in Eugene?

Yes, a sump pump installation typically requires building permits in Eugene, OR. The average permit cost in Eugene is $1,314. Always confirm requirements with the Eugene building department before starting work.

Is a sump pump installation a good investment in Eugene?

A sump pump installation provides an estimated 45% ROI nationally. In Eugene, where the median home price is $477,650, this project costs about 0.4% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Sump Pump Installation in Eugene, OR — Costs $677 to $4,511

What does sump pump installation cost in Eugene? Average $1,692, ranging $677–$4,511. Labor runs $34.59/hr locally — 13% above the national average. Free breakdown with material + labor split.

Eugene, OR Market

+13% vs national

Labor Rate

$34.59/hr

Material Index

109

Avg Permit Cost

$1,314

Median Home Price

$477,650

Eugene is a mid-sized city in Oregon with a healthy pool of local contractors. Homeowners generally have several options to compare for a sump pump installation, which helps keep pricing competitive. Costs in Eugene run slightly above the national average, though the gap is modest enough that smart material choices and timing can close it. The median home in Eugene is valued at $477,650, putting this project at about 0.4% of home value — a moderate investment with a projected 45% ROI.

Low Estimate

$677

National: $600

Mid-Range

$1,692

National: $1,500

High End

$4,511

National: $4,000

Per Sq Ft

National: $0

Duration: 4-8 hours

DIY: Hard

Permits: Required

ROI: 45%

Sump Pump Installation Cost Calculator for Eugene

Adjusted for Eugene's labor rate ($34.59/hr) and material costs (index 109).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Eugene

$1,624

Based on 200 sq ft at mid quality, adjusted for Eugene market rates.

Local Cost Breakdown

Labor (60%)$1,015

At Eugene's average rate of $34.59/hr (15% above national avg)

Materials (40%)$677

Material cost index 109 (9% above national baseline of 100)

Sump Pump Installation vs. Home Value in Eugene

Metric	Eugene	National Avg
Sump Pump Installation (Mid-Range)	$1,692	$1,500
Median Home Price	$477,650	$350,000
Project as % of Home Value	0.4%	0.4%
Estimated ROI	45%	45%
Median Household Income	$85,841	$75,000

What Affects the Price in Eugene

1Local labor rates ($34.59/hr in Eugene)
2Material cost index (109 vs national 100)
3Basin size
4Submersible vs pedestal pump
5Horsepower rating
6Battery backup

Popular Upgrades

Battery backup system
Water alarm sensor
Wi-Fi monitoring

Other Projects in Eugene, OR

Whole House Generator Installation

$16,775

HardROI 55%

HVAC System Replacement

$13,382

HardROI 50%

Whole House Plumbing Repiping

$11,310

HardROI 45%

Spray Foam Insulation

$8,997

HardROI 60%

Second Story Addition

$224,300

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$168,225

HardROI 80%

Room Addition

$100,935

HardROI 55%

Home Addition

$89,468

MediumROI 60%

Sump Pump Installation in Other Oregon Cities

Portland, OR

$2,059

+22%Pop. 652,503

Salem, OR

$1,782

+5%Pop. 175,535

Gresham, OR

$1,957

+16%Pop. 113,103

Hillsboro, OR

$1,722

+2%Pop. 106,447

Bend, OR

$1,880

+11%Pop. 102,059

Beaverton, OR

$1,907

+13%Pop. 99,037

Medford, OR

$1,922

+14%Pop. 85,395

Springfield, OR

$2,040

+21%Pop. 63,230

Planning a Sump Pump Installation in Eugene

Building permits are typically required for a sump pump installation in Eugene. The average permit fee in this area is $1,314, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 4-8 hours from start to finish.

A sump pump installation is a complex project best left to licensed professionals. In Eugene, skilled contractors charge an average of $34.59/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

With a median household income of $85,841, many Eugene residents can budget for this project through savings. The mid-range cost of $1,692 represents 2% of the typical household's annual income.

Sump Pump Installation — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Eugene

View labor rates, material costs, and project estimates for Eugene, OR.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs