How much does a sump pump installation cost in Erie, PA?

The average sump pump installation in Erie, PA costs $1,786 in 2026. Costs range from $714 for a basic project to $4,762 for a high-end renovation. Erie is 19% more expensive than the national average of $1,500.

What is the labor rate for contractors in Erie?

The average contractor labor rate in Erie, PA is $36.93/hour, compared to the national average of $30/hour. For a sump pump installation, labor typically accounts for 60% of the total cost, which is approximately $1,072 in Erie.

Are materials more expensive in Erie?

Erie has a material cost index of 113 (national average = 100). Materials cost about 13% more than the national average. For a sump pump installation, materials account for 40% of the cost, approximately $714.

Do I need a permit for a sump pump installation in Erie?

Yes, a sump pump installation typically requires building permits in Erie, PA. The average permit cost in Erie is $2,087. Always confirm requirements with the Erie building department before starting work.

Is a sump pump installation a good investment in Erie?

A sump pump installation provides an estimated 45% ROI nationally. In Erie, where the median home price is $398,241, this project costs about 0.4% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Sump Pump Installation in Erie, PA — Costs $714 to $4,762

What does sump pump installation cost in Erie? Average $1,786, ranging $714–$4,762. Labor runs $36.93/hr locally — 19% above the national average. Free breakdown with material + labor split.

Erie, PA Market

+19% vs national

Labor Rate

$36.93/hr

Material Index

113

Avg Permit Cost

$2,087

Median Home Price

$398,241

In a smaller market like Erie, Pennsylvania, the pool of contractors specializing in sump pump installation may be more limited. Getting 3+ quotes is especially important to ensure fair pricing. At 19% above the national average, Erie is one of the more expensive markets for home improvement — driven primarily by above-average labor rates in the region. The median home in Erie is valued at $398,241, putting this project at about 0.4% of home value — a moderate investment with a projected 45% ROI.

Low Estimate

$714

National: $600

Mid-Range

$1,786

National: $1,500

High End

$4,762

National: $4,000

Per Sq Ft

National: $0

Duration: 4-8 hours

DIY: Hard

Permits: Required

ROI: 45%

Sump Pump Installation Cost Calculator for Erie

Adjusted for Erie's labor rate ($36.93/hr) and material costs (index 113).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Erie

$1,715

Based on 200 sq ft at mid quality, adjusted for Erie market rates.

Local Cost Breakdown

Labor (60%)$1,072

At Erie's average rate of $36.93/hr (23% above national avg)

Materials (40%)$714

Material cost index 113 (13% above national baseline of 100)

Sump Pump Installation vs. Home Value in Erie

Metric	Erie	National Avg
Sump Pump Installation (Mid-Range)	$1,786	$1,500
Median Home Price	$398,241	$350,000
Project as % of Home Value	0.4%	0.4%
Estimated ROI	45%	45%
Median Household Income	$81,542	$75,000

What Affects the Price in Erie

1Local labor rates ($36.93/hr in Erie)
2Material cost index (113 vs national 100)
3Basin size
4Submersible vs pedestal pump
5Horsepower rating
6Battery backup

Popular Upgrades

Battery backup system
Water alarm sensor
Wi-Fi monitoring

Other Projects in Erie, PA

Whole House Generator Installation

$17,632

HardROI 55%

HVAC System Replacement

$14,045

HardROI 50%

Whole House Plumbing Repiping

$11,957

HardROI 45%

Spray Foam Insulation

$9,484

HardROI 60%

Second Story Addition

$236,100

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$177,075

HardROI 80%

Room Addition

$106,245

HardROI 55%

Home Addition

$94,036

MediumROI 60%

Sump Pump Installation in Other Pennsylvania Cities

Philadelphia, PA

$2,043

+14%Pop. 1,603,797

Pittsburgh, PA

$1,865

+4%Pop. 302,971

Allentown, PA

$1,654

-7%Pop. 126,092

Reading, PA

$1,582

-11%Pop. 95,112

Upper Darby, PA

$1,784

SamePop. 85,681

Scranton, PA

$1,903

+7%Pop. 76,997

Bethlehem, PA

$1,620

-9%Pop. 75,781

Lower Merion, PA

$1,736

-3%Pop. 63,988

Planning a Sump Pump Installation in Erie

Building permits are typically required for a sump pump installation in Erie. The average permit fee in this area is $2,087, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 4-8 hours from start to finish.

A sump pump installation is a complex project best left to licensed professionals. In Erie, skilled contractors charge an average of $36.93/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

With a median household income of $81,542, many Erie residents can budget for this project through savings. The mid-range cost of $1,786 represents 2% of the typical household's annual income.

Sump Pump Installation — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Erie

View labor rates, material costs, and project estimates for Erie, PA.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs