How much does a sump pump installation cost in Edmond, OK?

The average sump pump installation in Edmond, OK costs $1,791 in 2026. Costs range from $716 for a basic project to $4,775 for a high-end renovation. Edmond is 19% more expensive than the national average of $1,500.

What is the labor rate for contractors in Edmond?

The average contractor labor rate in Edmond, OK is $40.69/hour, compared to the national average of $30/hour. For a sump pump installation, labor typically accounts for 60% of the total cost, which is approximately $1,075 in Edmond.

Are materials more expensive in Edmond?

Edmond has a material cost index of 95 (national average = 100). Materials cost about 5% less than the national average. For a sump pump installation, materials account for 40% of the cost, approximately $716.

Do I need a permit for a sump pump installation in Edmond?

Yes, a sump pump installation typically requires building permits in Edmond, OK. The average permit cost in Edmond is $1,446. Always confirm requirements with the Edmond building department before starting work.

Is a sump pump installation a good investment in Edmond?

A sump pump installation provides an estimated 45% ROI nationally. In Edmond, where the median home price is $265,000, this project costs about 0.7% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Sump Pump Installation in Edmond, OK — Costs $716 to $4,775

What does sump pump installation cost in Edmond? Average $1,791, ranging $716–$4,775. Labor runs $40.69/hr locally — 19% above the national average. Free breakdown with material + labor split.

Edmond, OK Market

+19% vs national

Labor Rate

$40.69/hr

Material Index

Avg Permit Cost

$1,446

Median Home Price

$265,000

In a smaller market like Edmond, Oklahoma, the pool of contractors specializing in sump pump installation may be more limited. Getting 3+ quotes is especially important to ensure fair pricing. At 19% above the national average, Edmond is one of the more expensive markets for home improvement — driven primarily by above-average labor rates in the region. The median home in Edmond is valued at $265,000, putting this project at about 0.7% of home value — a moderate investment with a projected 45% ROI.

Low Estimate

$716

National: $600

Mid-Range

$1,791

National: $1,500

High End

$4,775

National: $4,000

Per Sq Ft

National: $0

Duration: 4-8 hours

DIY: Hard

Permits: Required

ROI: 45%

Sump Pump Installation Cost Calculator for Edmond

Adjusted for Edmond's labor rate ($40.69/hr) and material costs (index 95).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Edmond

$1,719

Based on 200 sq ft at mid quality, adjusted for Edmond market rates.

Local Cost Breakdown

Labor (60%)$1,075

At Edmond's average rate of $40.69/hr (36% above national avg)

Materials (40%)$716

Material cost index 95 (5% below national baseline of 100)

Sump Pump Installation vs. Home Value in Edmond

Metric	Edmond	National Avg
Sump Pump Installation (Mid-Range)	$1,791	$1,500
Median Home Price	$265,000	$350,000
Project as % of Home Value	0.7%	0.4%
Estimated ROI	45%	45%
Median Household Income	$72,000	$75,000

What Affects the Price in Edmond

1Local labor rates ($40.69/hr in Edmond)
2Material cost index (95 vs national 100)
3Basin size
4Submersible vs pedestal pump
5Horsepower rating
6Battery backup

Popular Upgrades

Battery backup system
Water alarm sensor
Wi-Fi monitoring

Other Projects in Edmond, OK

Whole House Generator Installation

$16,993

HardROI 55%

HVAC System Replacement

$13,350

HardROI 50%

Whole House Plumbing Repiping

$12,141

HardROI 45%

Spray Foam Insulation

$9,388

HardROI 60%

Second Story Addition

$230,633

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$172,975

HardROI 80%

Room Addition

$103,785

HardROI 55%

Home Addition

$90,628

MediumROI 60%

Sump Pump Installation in Other Oklahoma Cities

Oklahoma City, OK

$1,229

-31%Pop. 681,054

Tulsa, OK

$1,146

-36%Pop. 413,066

Norman, OK

$1,761

-2%Pop. 128,026

Broken Arrow, OK

$1,193

-33%Pop. 113,540

Lawton, OK

$1,659

-7%Pop. 89,015

Moore, OK

$1,714

-4%Pop. 62,105

Midwest City, OK

$1,732

-3%Pop. 57,503

Stillwater, OK

$1,688

-6%Pop. 50,210

Planning a Sump Pump Installation in Edmond

Building permits are typically required for a sump pump installation in Edmond. The average permit fee in this area is $1,446, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 4-8 hours from start to finish.

A sump pump installation is a complex project best left to licensed professionals. In Edmond, skilled contractors charge an average of $40.69/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

For the median Edmond household earning $72,000/year, this project at $1,791 represents a significant investment. Consider financing options or phasing the work to spread costs over time.

Sump Pump Installation — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Edmond

View labor rates, material costs, and project estimates for Edmond, OK.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs