How much does a sump pump installation cost in Dayton, OH?

The average sump pump installation in Dayton, OH costs $1,392 in 2026. Costs range from $557 for a basic project to $3,713 for a high-end renovation. Dayton is 7% less expensive than the national average of $1,500.

What is the labor rate for contractors in Dayton?

The average contractor labor rate in Dayton, OH is $28.21/hour, compared to the national average of $30/hour. For a sump pump installation, labor typically accounts for 60% of the total cost, which is approximately $835 in Dayton.

Are materials more expensive in Dayton?

Dayton has a material cost index of 91 (national average = 100). Materials cost about 9% less than the national average. For a sump pump installation, materials account for 40% of the cost, approximately $557.

Do I need a permit for a sump pump installation in Dayton?

Yes, a sump pump installation typically requires building permits in Dayton, OH. The average permit cost in Dayton is $962. Always confirm requirements with the Dayton building department before starting work.

Is a sump pump installation a good investment in Dayton?

A sump pump installation provides an estimated 45% ROI nationally. In Dayton, where the median home price is $178,272, this project costs about 0.8% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Sump Pump Installation in Dayton, OH — Costs $557 to $3,713

What does sump pump installation cost in Dayton? Average $1,392, ranging $557–$3,713. Labor runs $28.21/hr locally — 7% below the national average. Free breakdown with material + labor split.

Dayton, OH Market

-7% vs national

Labor Rate

$28.21/hr

Material Index

Avg Permit Cost

$962

Median Home Price

$178,272

Dayton is a mid-sized city in Ohio with a healthy pool of local contractors. Homeowners generally have several options to compare for a sump pump installation, which helps keep pricing competitive. Dayton offers slightly below-average renovation costs, giving homeowners a small cost advantage compared to most US markets. At a median home price of $178,272, homeowners in Dayton should weigh the project cost (0.8% of home value) carefully against expected returns to avoid over-improving for the local market.

Low Estimate

$557

National: $600

Mid-Range

$1,392

National: $1,500

High End

$3,713

National: $4,000

Per Sq Ft

National: $0

Duration: 4-8 hours

DIY: Hard

Permits: Required

ROI: 45%

Sump Pump Installation Cost Calculator for Dayton

Adjusted for Dayton's labor rate ($28.21/hr) and material costs (index 91).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Dayton

$1,336

Based on 200 sq ft at mid quality, adjusted for Dayton market rates.

Local Cost Breakdown

Labor (60%)$835

At Dayton's average rate of $28.21/hr (6% below national avg)

Materials (40%)$557

Material cost index 91 (9% below national baseline of 100)

Sump Pump Installation vs. Home Value in Dayton

Metric	Dayton	National Avg
Sump Pump Installation (Mid-Range)	$1,392	$1,500
Median Home Price	$178,272	$350,000
Project as % of Home Value	0.8%	0.4%
Estimated ROI	45%	45%
Median Household Income	$59,480	$75,000

What Affects the Price in Dayton

1Local labor rates ($28.21/hr in Dayton)
2Material cost index (91 vs national 100)
3Basin size
4Submersible vs pedestal pump
5Horsepower rating
6Battery backup

Popular Upgrades

Battery backup system
Water alarm sensor
Wi-Fi monitoring

Other Projects in Dayton, OH

Whole House Generator Installation

$13,855

HardROI 55%

HVAC System Replacement

$11,066

HardROI 50%

Whole House Plumbing Repiping

$9,297

HardROI 45%

Spray Foam Insulation

$7,413

HardROI 60%

Second Story Addition

$185,033

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$138,775

HardROI 80%

Room Addition

$83,265

HardROI 55%

Home Addition

$73,892

MediumROI 60%

Sump Pump Installation in Other Ohio Cities

Columbus, OH

$1,573

+13%Pop. 905,748

Cleveland, OH

$1,513

+9%Pop. 372,624

Cincinnati, OH

$1,586

+14%Pop. 309,317

Toledo, OH

$1,516

+9%Pop. 270,871

Akron, OH

$1,511

+9%Pop. 190,469

Parma, OH

$1,387

SamePop. 81,601

Canton, OH

$1,237

-11%Pop. 70,458

Lorain, OH

$1,334

-4%Pop. 65,211

Planning a Sump Pump Installation in Dayton

Building permits are typically required for a sump pump installation in Dayton. The average permit fee in this area is $962, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 4-8 hours from start to finish.

A sump pump installation is a complex project best left to licensed professionals. In Dayton, skilled contractors charge an average of $28.21/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

For the median Dayton household earning $59,480/year, this project at $1,392 represents a significant investment. Consider financing options or phasing the work to spread costs over time.

Sump Pump Installation — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Dayton

View labor rates, material costs, and project estimates for Dayton, OH.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs