How much does a sump pump installation cost in Dallas, TX?

The average sump pump installation in Dallas, TX costs $1,754 in 2026. Costs range from $702 for a basic project to $4,678 for a high-end renovation. Dallas is 17% more expensive than the national average of $1,500.

What is the labor rate for contractors in Dallas?

The average contractor labor rate in Dallas, TX is $36.28/hour, compared to the national average of $30/hour. For a sump pump installation, labor typically accounts for 60% of the total cost, which is approximately $1,052 in Dallas.

Are materials more expensive in Dallas?

Dallas has a material cost index of 111 (national average = 100). Materials cost about 11% more than the national average. For a sump pump installation, materials account for 40% of the cost, approximately $702.

Do I need a permit for a sump pump installation in Dallas?

Yes, a sump pump installation typically requires building permits in Dallas, TX. The average permit cost in Dallas is $1,076. Always confirm requirements with the Dallas building department before starting work.

Is a sump pump installation a good investment in Dallas?

A sump pump installation provides an estimated 45% ROI nationally. In Dallas, where the median home price is $244,274, this project costs about 0.7% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Sump Pump Installation in Dallas, TX — Costs $702 to $4,678

What does sump pump installation cost in Dallas? Average $1,754, ranging $702–$4,678. Labor runs $36.28/hr locally — 17% above the national average. Free breakdown with material + labor split.

Dallas, TX Market

+17% vs national

Labor Rate

$36.28/hr

Material Index

111

Avg Permit Cost

$1,076

Median Home Price

$244,274

As one of the largest metros in Texas, Dallas has a competitive contractor market with hundreds of licensed professionals. This typically gives homeowners more leverage on pricing, though high demand for renovations can offset that advantage. At 17% above the national average, Dallas is one of the more expensive markets for home improvement — driven primarily by above-average labor rates in the region. At a median home price of $244,274, homeowners in Dallas should weigh the project cost (0.7% of home value) carefully against expected returns to avoid over-improving for the local market.

Low Estimate

$702

National: $600

Mid-Range

$1,754

National: $1,500

High End

$4,678

National: $4,000

Per Sq Ft

National: $0

Duration: 4-8 hours

DIY: Hard

Permits: Required

ROI: 45%

Sump Pump Installation Cost Calculator for Dallas

Adjusted for Dallas's labor rate ($36.28/hr) and material costs (index 111).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Dallas

$1,684

Based on 200 sq ft at mid quality, adjusted for Dallas market rates.

Local Cost Breakdown

Labor (60%)$1,052

At Dallas's average rate of $36.28/hr (21% above national avg)

Materials (40%)$702

Material cost index 111 (11% above national baseline of 100)

Sump Pump Installation vs. Home Value in Dallas

Metric	Dallas	National Avg
Sump Pump Installation (Mid-Range)	$1,754	$1,500
Median Home Price	$244,274	$350,000
Project as % of Home Value	0.7%	0.4%
Estimated ROI	45%	45%
Median Household Income	$61,964	$75,000

What Affects the Price in Dallas

1Local labor rates ($36.28/hr in Dallas)
2Material cost index (111 vs national 100)
3Basin size
4Submersible vs pedestal pump
5Horsepower rating
6Battery backup

Popular Upgrades

Battery backup system
Water alarm sensor
Wi-Fi monitoring

Other Projects in Dallas, TX

Whole House Generator Installation

$17,321

HardROI 55%

HVAC System Replacement

$13,797

HardROI 50%

Whole House Plumbing Repiping

$11,746

HardROI 45%

Spray Foam Insulation

$9,317

HardROI 60%

Second Story Addition

$231,933

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$173,950

HardROI 80%

Room Addition

$104,370

HardROI 55%

Home Addition

$92,376

MediumROI 60%

Sump Pump Installation in Other Texas Cities

Houston, TX

$1,728

-1%Pop. 2,304,580

San Antonio, TX

$1,530

-13%Pop. 1,547,253

Austin, TX

$1,549

-12%Pop. 978,908

Fort Worth, TX

$1,647

-6%Pop. 918,915

El Paso, TX

$1,401

-20%Pop. 678,815

Arlington, TX

$1,319

-25%Pop. 394,266

Corpus Christi, TX

$1,452

-17%Pop. 317,863

Plano, TX

$1,356

-23%Pop. 288,061

Planning a Sump Pump Installation in Dallas

Building permits are typically required for a sump pump installation in Dallas. The average permit fee in this area is $1,076, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 4-8 hours from start to finish.

A sump pump installation is a complex project best left to licensed professionals. In Dallas, skilled contractors charge an average of $36.28/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

For the median Dallas household earning $61,964/year, this project at $1,754 represents a significant investment. Consider financing options or phasing the work to spread costs over time.

Sump Pump Installation — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Dallas

View labor rates, material costs, and project estimates for Dallas, TX.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs