How much does a sump pump installation cost in Bellevue, WA?

The average sump pump installation in Bellevue, WA costs $2,284 in 2026. Costs range from $914 for a basic project to $6,091 for a high-end renovation. Bellevue is 52% more expensive than the national average of $1,500.

What is the labor rate for contractors in Bellevue?

The average contractor labor rate in Bellevue, WA is $48.94/hour, compared to the national average of $30/hour. For a sump pump installation, labor typically accounts for 60% of the total cost, which is approximately $1,370 in Bellevue.

Are materials more expensive in Bellevue?

Bellevue has a material cost index of 136 (national average = 100). Materials cost about 36% more than the national average. For a sump pump installation, materials account for 40% of the cost, approximately $914.

Do I need a permit for a sump pump installation in Bellevue?

Yes, a sump pump installation typically requires building permits in Bellevue, WA. The average permit cost in Bellevue is $2,365. Always confirm requirements with the Bellevue building department before starting work.

Is a sump pump installation a good investment in Bellevue?

A sump pump installation provides an estimated 45% ROI nationally. In Bellevue, where the median home price is $582,044, this project costs about 0.4% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Sump Pump Installation in Bellevue, WA — Costs $914 to $6,091

What does sump pump installation cost in Bellevue? Average $2,284, ranging $914–$6,091. Labor runs $48.94/hr locally — 52% above the national average. Free breakdown with material + labor split.

Bellevue, WA Market

+52% vs national

Labor Rate

$48.94/hr

Material Index

136

Avg Permit Cost

$2,365

Median Home Price

$582,044

Bellevue is a mid-sized city in Washington with a healthy pool of local contractors. Homeowners generally have several options to compare for a sump pump installation, which helps keep pricing competitive. At 52% above the national average, Bellevue is one of the more expensive markets for home improvement — driven primarily by above-average labor rates in the region. With a median home price of $582,044, this sump pump installation represents just 0.4% of typical home value — a relatively small investment that can significantly boost curb appeal or functionality.

Low Estimate

$914

National: $600

Mid-Range

$2,284

National: $1,500

High End

$6,091

National: $4,000

Per Sq Ft

National: $0

Duration: 4-8 hours

DIY: Hard

Permits: Required

ROI: 45%

Sump Pump Installation Cost Calculator for Bellevue

Adjusted for Bellevue's labor rate ($48.94/hr) and material costs (index 136).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Bellevue

$2,193

Based on 200 sq ft at mid quality, adjusted for Bellevue market rates.

Local Cost Breakdown

Labor (60%)$1,370

At Bellevue's average rate of $48.94/hr (63% above national avg)

Materials (40%)$914

Material cost index 136 (36% above national baseline of 100)

Sump Pump Installation vs. Home Value in Bellevue

Metric	Bellevue	National Avg
Sump Pump Installation (Mid-Range)	$2,284	$1,500
Median Home Price	$582,044	$350,000
Project as % of Home Value	0.4%	0.4%
Estimated ROI	45%	45%
Median Household Income	$94,385	$75,000

What Affects the Price in Bellevue

1Local labor rates ($48.94/hr in Bellevue)
2Material cost index (136 vs national 100)
3Basin size
4Submersible vs pedestal pump
5Horsepower rating
6Battery backup

Popular Upgrades

Battery backup system
Water alarm sensor
Wi-Fi monitoring

Other Projects in Bellevue, WA

Whole House Generator Installation

$22,232

HardROI 55%

HVAC System Replacement

$17,622

HardROI 50%

Whole House Plumbing Repiping

$15,364

HardROI 45%

Spray Foam Insulation

$12,074

HardROI 60%

Second Story Addition

$299,133

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$224,350

HardROI 80%

Room Addition

$134,610

HardROI 55%

Home Addition

$118,568

MediumROI 60%

Sump Pump Installation in Other Washington Cities

Seattle, WA

$2,326

+2%Pop. 737,015

Spokane, WA

$2,102

-8%Pop. 228,989

Tacoma, WA

$1,819

-20%Pop. 219,346

Vancouver, WA

$1,978

-13%Pop. 190,915

Kent, WA

$1,811

-21%Pop. 136,588

Everett, WA

$1,996

-13%Pop. 110,629

Renton, WA

$2,087

-9%Pop. 106,785

Spokane Valley, WA

$2,089

-9%Pop. 103,597

Planning a Sump Pump Installation in Bellevue

Building permits are typically required for a sump pump installation in Bellevue. The average permit fee in this area is $2,365, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 4-8 hours from start to finish.

A sump pump installation is a complex project best left to licensed professionals. In Bellevue, skilled contractors charge an average of $48.94/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

With a median household income of $94,385, many Bellevue residents can budget for this project through savings. The mid-range cost of $2,284 represents 2% of the typical household's annual income.

Sump Pump Installation — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Bellevue

View labor rates, material costs, and project estimates for Bellevue, WA.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs