How much does a sump pump installation cost in Ann Arbor, MI?

The average sump pump installation in Ann Arbor, MI costs $1,729 in 2026. Costs range from $691 for a basic project to $4,610 for a high-end renovation. Ann Arbor is 15% more expensive than the national average of $1,500.

What is the labor rate for contractors in Ann Arbor?

The average contractor labor rate in Ann Arbor, MI is $36.22/hour, compared to the national average of $30/hour. For a sump pump installation, labor typically accounts for 60% of the total cost, which is approximately $1,037 in Ann Arbor.

Are materials more expensive in Ann Arbor?

Ann Arbor has a material cost index of 107 (national average = 100). Materials cost about 7% more than the national average. For a sump pump installation, materials account for 40% of the cost, approximately $692.

Do I need a permit for a sump pump installation in Ann Arbor?

Yes, a sump pump installation typically requires building permits in Ann Arbor, MI. The average permit cost in Ann Arbor is $1,435. Always confirm requirements with the Ann Arbor building department before starting work.

Is a sump pump installation a good investment in Ann Arbor?

A sump pump installation provides an estimated 45% ROI nationally. In Ann Arbor, where the median home price is $208,115, this project costs about 0.8% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Sump Pump Installation in Ann Arbor, MI — Costs $691 to $4,610

What does sump pump installation cost in Ann Arbor? Average $1,729, ranging $691–$4,610. Labor runs $36.22/hr locally — 15% above the national average. Free breakdown with material + labor split.

Ann Arbor, MI Market

+15% vs national

Labor Rate

$36.22/hr

Material Index

107

Avg Permit Cost

$1,435

Median Home Price

$208,115

Ann Arbor is a mid-sized city in Michigan with a healthy pool of local contractors. Homeowners generally have several options to compare for a sump pump installation, which helps keep pricing competitive. Costs in Ann Arbor run slightly above the national average, though the gap is modest enough that smart material choices and timing can close it. At a median home price of $208,115, homeowners in Ann Arbor should weigh the project cost (0.8% of home value) carefully against expected returns to avoid over-improving for the local market.

Low Estimate

$691

National: $600

Mid-Range

$1,729

National: $1,500

High End

$4,610

National: $4,000

Per Sq Ft

National: $0

Duration: 4-8 hours

DIY: Hard

Permits: Required

ROI: 45%

Sump Pump Installation Cost Calculator for Ann Arbor

Adjusted for Ann Arbor's labor rate ($36.22/hr) and material costs (index 107).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Ann Arbor

$1,660

Based on 200 sq ft at mid quality, adjusted for Ann Arbor market rates.

Local Cost Breakdown

Labor (60%)$1,037

At Ann Arbor's average rate of $36.22/hr (21% above national avg)

Materials (40%)$692

Material cost index 107 (7% above national baseline of 100)

Sump Pump Installation vs. Home Value in Ann Arbor

Metric	Ann Arbor	National Avg
Sump Pump Installation (Mid-Range)	$1,729	$1,500
Median Home Price	$208,115	$350,000
Project as % of Home Value	0.8%	0.4%
Estimated ROI	45%	45%
Median Household Income	$62,859	$75,000

What Affects the Price in Ann Arbor

1Local labor rates ($36.22/hr in Ann Arbor)
2Material cost index (107 vs national 100)
3Basin size
4Submersible vs pedestal pump
5Horsepower rating
6Battery backup

Popular Upgrades

Battery backup system
Water alarm sensor
Wi-Fi monitoring

Other Projects in Ann Arbor, MI

Whole House Generator Installation

$16,977

HardROI 55%

HVAC System Replacement

$13,499

HardROI 50%

Whole House Plumbing Repiping

$11,593

HardROI 45%

Spray Foam Insulation

$9,164

HardROI 60%

Second Story Addition

$227,733

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$170,800

HardROI 80%

Room Addition

$102,480

HardROI 55%

Home Addition

$90,544

MediumROI 60%

Sump Pump Installation in Other Michigan Cities

Detroit, MI

$1,907

+10%Pop. 639,111

Grand Rapids, MI

$1,633

-6%Pop. 198,917

Warren, MI

$1,479

-14%Pop. 139,387

Sterling Heights, MI

$1,457

-16%Pop. 134,346

Lansing, MI

$1,426

-18%Pop. 112,644

Dearborn, MI

$1,470

-15%Pop. 109,976

Clinton Township, MI

$1,804

+4%Pop. 100,800

Canton Township, MI

$1,779

+3%Pop. 98,659

Planning a Sump Pump Installation in Ann Arbor

Building permits are typically required for a sump pump installation in Ann Arbor. The average permit fee in this area is $1,435, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 4-8 hours from start to finish.

A sump pump installation is a complex project best left to licensed professionals. In Ann Arbor, skilled contractors charge an average of $36.22/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

For the median Ann Arbor household earning $62,859/year, this project at $1,729 represents a significant investment. Consider financing options or phasing the work to spread costs over time.

Sump Pump Installation — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Ann Arbor

View labor rates, material costs, and project estimates for Ann Arbor, MI.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs