How much does a sump pump installation cost in Akron, OH?

The average sump pump installation in Akron, OH costs $1,511 in 2026. Costs range from $604 for a basic project to $4,029 for a high-end renovation. Akron is 1% more expensive than the national average of $1,500.

What is the labor rate for contractors in Akron?

The average contractor labor rate in Akron, OH is $30.96/hour, compared to the national average of $30/hour. For a sump pump installation, labor typically accounts for 60% of the total cost, which is approximately $907 in Akron.

Are materials more expensive in Akron?

Akron has a material cost index of 97 (national average = 100). Materials cost about 3% less than the national average. For a sump pump installation, materials account for 40% of the cost, approximately $604.

Do I need a permit for a sump pump installation in Akron?

Yes, a sump pump installation typically requires building permits in Akron, OH. The average permit cost in Akron is $1,144. Always confirm requirements with the Akron building department before starting work.

Is a sump pump installation a good investment in Akron?

A sump pump installation provides an estimated 45% ROI nationally. In Akron, where the median home price is $240,500, this project costs about 0.6% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Sump Pump Installation in Akron, OH — Costs $604 to $4,029

What does sump pump installation cost in Akron? Average $1,511, ranging $604–$4,029. Labor runs $30.96/hr locally — 1% above the national average. Free breakdown with material + labor split.

Akron, OH Market

+1% vs national

Labor Rate

$30.96/hr

Material Index

Avg Permit Cost

$1,144

Median Home Price

$240,500

Akron is a mid-sized city in Ohio with a healthy pool of local contractors. Homeowners generally have several options to compare for a sump pump installation, which helps keep pricing competitive. Costs in Akron run slightly above the national average, though the gap is modest enough that smart material choices and timing can close it. At a median home price of $240,500, homeowners in Akron should weigh the project cost (0.6% of home value) carefully against expected returns to avoid over-improving for the local market.

Low Estimate

$604

National: $600

Mid-Range

$1,511

National: $1,500

High End

$4,029

National: $4,000

Per Sq Ft

National: $0

Duration: 4-8 hours

DIY: Hard

Permits: Required

ROI: 45%

Sump Pump Installation Cost Calculator for Akron

Adjusted for Akron's labor rate ($30.96/hr) and material costs (index 97).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Akron

$1,451

Based on 200 sq ft at mid quality, adjusted for Akron market rates.

Local Cost Breakdown

Labor (60%)$907

At Akron's average rate of $30.96/hr (3% above national avg)

Materials (40%)$604

Material cost index 97 (3% below national baseline of 100)

Sump Pump Installation vs. Home Value in Akron

Metric	Akron	National Avg
Sump Pump Installation (Mid-Range)	$1,511	$1,500
Median Home Price	$240,500	$350,000
Project as % of Home Value	0.6%	0.4%
Estimated ROI	45%	45%
Median Household Income	$62,810	$75,000

What Affects the Price in Akron

1Local labor rates ($30.96/hr in Akron)
2Material cost index (97 vs national 100)
3Basin size
4Submersible vs pedestal pump
5Horsepower rating
6Battery backup

Popular Upgrades

Battery backup system
Water alarm sensor
Wi-Fi monitoring

Other Projects in Akron, OH

Whole House Generator Installation

$14,969

HardROI 55%

HVAC System Replacement

$11,938

HardROI 50%

Whole House Plumbing Repiping

$10,103

HardROI 45%

Spray Foam Insulation

$8,033

HardROI 60%

Second Story Addition

$200,200

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$150,150

HardROI 80%

Room Addition

$90,090

HardROI 55%

Home Addition

$79,832

MediumROI 60%

Sump Pump Installation in Other Ohio Cities

Columbus, OH

$1,573

+4%Pop. 905,748

Cleveland, OH

$1,513

SamePop. 372,624

Cincinnati, OH

$1,586

+5%Pop. 309,317

Toledo, OH

$1,516

SamePop. 270,871

Dayton, OH

$1,392

-8%Pop. 137,644

Parma, OH

$1,387

-8%Pop. 81,601

Canton, OH

$1,237

-18%Pop. 70,458

Lorain, OH

$1,334

-12%Pop. 65,211

Planning a Sump Pump Installation in Akron

Building permits are typically required for a sump pump installation in Akron. The average permit fee in this area is $1,144, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 4-8 hours from start to finish.

A sump pump installation is a complex project best left to licensed professionals. In Akron, skilled contractors charge an average of $30.96/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

For the median Akron household earning $62,810/year, this project at $1,511 represents a significant investment. Consider financing options or phasing the work to spread costs over time.

Sump Pump Installation — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Akron

View labor rates, material costs, and project estimates for Akron, OH.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs