How much does a spray foam insulation cost in Irving, TX?

The average spray foam insulation in Irving, TX costs $9,847 in 2026. Costs range from $3,693 for a basic project to $24,618 for a high-end renovation. Irving is 23% more expensive than the national average of $8,000.

What is the labor rate for contractors in Irving?

The average contractor labor rate in Irving, TX is $43.33/hour, compared to the national average of $30/hour. For a spray foam insulation, labor typically accounts for 55% of the total cost, which is approximately $5,416 in Irving.

Are materials more expensive in Irving?

Irving has a material cost index of 97 (national average = 100). Materials cost about 3% less than the national average. For a spray foam insulation, materials account for 45% of the cost, approximately $4,431.

Do I need a permit for a spray foam insulation in Irving?

A spray foam insulation usually does not require a permit in most jurisdictions, though rules vary in Irving, TX. Always verify with the local building department. The average permit cost in Irving (when required) is $2,266.

Is a spray foam insulation a good investment in Irving?

A spray foam insulation provides an estimated 60% ROI nationally. In Irving, where the median home price is $280,000, this project costs about 3.5% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Spray Foam Insulation in Irving, TX — Costs $3,693 to $24,618

What does spray foam insulation cost in Irving? Average $9,847, ranging $3,693–$24,618. Labor runs $43.33/hr locally — 23% above the national average. Free breakdown with material + labor split.

Irving, TX Market

+23% vs national

Labor Rate

$43.33/hr

Material Index

Avg Permit Cost

$2,266

Median Home Price

$280,000

Irving is a mid-sized city in Texas with a healthy pool of local contractors. Homeowners generally have several options to compare for a spray foam insulation, which helps keep pricing competitive. At 23% above the national average, Irving is one of the more expensive markets for home improvement — driven primarily by above-average labor rates in the region. The median home in Irving is valued at $280,000, putting this project at about 3.5% of home value — a moderate investment with a projected 60% ROI.

Low Estimate

$3,693

National: $3,000

Mid-Range

$9,847

National: $8,000

High End

$24,618

National: $20,000

Per Sq Ft

National: $3

Duration: 1-3 days

DIY: Hard

Permits: Not Required

ROI: 60%

Spray Foam Insulation Cost Calculator for Irving

Adjusted for Irving's labor rate ($43.33/hr) and material costs (index 97).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Irving

$9,847

Based on 200 sq ft at mid quality, adjusted for Irving market rates.

Local Cost Breakdown

Labor (55%)$5,416

At Irving's average rate of $43.33/hr (44% above national avg)

Materials (45%)$4,431

Material cost index 97 (3% below national baseline of 100)

Spray Foam Insulation vs. Home Value in Irving

Metric	Irving	National Avg
Spray Foam Insulation (Mid-Range)	$9,847	$8,000
Median Home Price	$280,000	$350,000
Project as % of Home Value	3.5%	2.3%
Estimated ROI	60%	60%
Median Household Income	$56,000	$75,000

What Affects the Price in Irving

1Local labor rates ($43.33/hr in Irving)
2Material cost index (97 vs national 100)
3Open-cell vs closed-cell
4Square footage
5Application area (attic, crawlspace, walls)
6Vapor barrier needs

Popular Upgrades

Closed-cell for maximum R-value
Attic ceiling application
Rim joist sealing

Other Projects in Irving, TX

Whole House Generator Installation

$17,752

HardROI 55%

HVAC System Replacement

$13,917

HardROI 50%

Whole House Plumbing Repiping

$12,783

HardROI 45%

Insulation Upgrade

$7,243

MediumROI 55%

Second Story Addition

$241,433

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$181,075

HardROI 80%

Room Addition

$108,645

HardROI 55%

Home Addition

$94,676

MediumROI 60%

Spray Foam Insulation in Other Texas Cities

Houston, TX

$9,183

-7%Pop. 2,304,580

San Antonio, TX

$8,148

-17%Pop. 1,547,253

Dallas, TX

$9,317

-5%Pop. 1,304,379

Austin, TX

$8,244

-16%Pop. 978,908

Fort Worth, TX

$8,760

-11%Pop. 918,915

El Paso, TX

$7,469

-24%Pop. 678,815

Arlington, TX

$7,041

-28%Pop. 394,266

Corpus Christi, TX

$7,737

-21%Pop. 317,863

Planning a Spray Foam Insulation in Irving

A spray foam insulation typically doesn't require a permit in Irving, which simplifies planning. However, always confirm with the local building department before starting, especially for structural changes. Expect the project to take 1-3 days to complete.

A spray foam insulation is a complex project best left to licensed professionals. In Irving, skilled contractors charge an average of $43.33/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

For the median Irving household earning $56,000/year, this project at $9,847 represents a significant investment. Consider financing options or phasing the work to spread costs over time.

Spray Foam Insulation — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Irving

View labor rates, material costs, and project estimates for Irving, TX.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs