How much does a radon mitigation system cost in Tulsa, OK?

The average radon mitigation system in Tulsa, OK costs $1,142 in 2026. Costs range from $609 for a basic project to $2,284 for a high-end renovation. Tulsa is 24% less expensive than the national average of $1,500.

What is the labor rate for contractors in Tulsa?

The average contractor labor rate in Tulsa, OK is $22.21/hour, compared to the national average of $30/hour. For a radon mitigation system, labor typically accounts for 65% of the total cost, which is approximately $742 in Tulsa.

Are materials more expensive in Tulsa?

Tulsa has a material cost index of 80 (national average = 100). Materials cost about 20% less than the national average. For a radon mitigation system, materials account for 35% of the cost, approximately $400.

Do I need a permit for a radon mitigation system in Tulsa?

A radon mitigation system usually does not require a permit in most jurisdictions, though rules vary in Tulsa, OK. Always verify with the local building department. The average permit cost in Tulsa (when required) is $647.

Is a radon mitigation system a good investment in Tulsa?

A radon mitigation system provides an estimated 35% ROI nationally. In Tulsa, where the median home price is $223,474, this project costs about 0.5% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Radon Mitigation System in Tulsa, OK — Costs $609 to $2,284

What does radon mitigation system cost in Tulsa? Average $1,142, ranging $609–$2,284. Labor runs $22.21/hr locally — 24% below the national average. Free breakdown with material + labor split.

Tulsa, OK Market

-24% vs national

Labor Rate

$22.21/hr

Material Index

Avg Permit Cost

$647

Median Home Price

$223,474

Tulsa is a mid-sized city in Oklahoma with a healthy pool of local contractors. Homeowners generally have several options to compare for a radon mitigation system, which helps keep pricing competitive. Tulsa is well below the national average for renovation costs, making it a favorable market for homeowners considering a radon mitigation system. At a median home price of $223,474, homeowners in Tulsa should weigh the project cost (0.5% of home value) carefully against expected returns to avoid over-improving for the local market.

Low Estimate

$609

National: $800

Mid-Range

$1,142

National: $1,500

High End

$2,284

National: $3,000

Per Sq Ft

National: $0

Duration: 4-8 hours

DIY: Hard

Permits: Not Required

ROI: 35%

Radon Mitigation System Cost Calculator for Tulsa

Adjusted for Tulsa's labor rate ($22.21/hr) and material costs (index 80).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Tulsa

$1,096

Based on 200 sq ft at mid quality, adjusted for Tulsa market rates.

Local Cost Breakdown

Labor (65%)$742

At Tulsa's average rate of $22.21/hr (26% below national avg)

Materials (35%)$400

Material cost index 80 (20% below national baseline of 100)

Radon Mitigation System vs. Home Value in Tulsa

Metric	Tulsa	National Avg
Radon Mitigation System (Mid-Range)	$1,142	$1,500
Median Home Price	$223,474	$350,000
Project as % of Home Value	0.5%	0.4%
Estimated ROI	35%	35%
Median Household Income	$47,177	$75,000

What Affects the Price in Tulsa

1Local labor rates ($22.21/hr in Tulsa)
2Material cost index (80 vs national 100)
3Number of suction points
4Fan size
5Pipe routing
6Basement vs slab foundation

Popular Upgrades

Continuous monitor with alarm
Sealed sump pit lid
Fan diagnostic gauge

Other Projects in Tulsa, OK

Whole House Generator Installation

$11,597

HardROI 55%

HVAC System Replacement

$9,314

HardROI 50%

Whole House Plumbing Repiping

$7,612

HardROI 45%

Spray Foam Insulation

$6,137

HardROI 60%

Second Story Addition

$154,033

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$115,525

HardROI 80%

Room Addition

$69,315

HardROI 55%

Home Addition

$61,852

MediumROI 60%

Radon Mitigation System in Other Oklahoma Cities

Oklahoma City, OK

$1,227

+7%Pop. 681,054

Norman, OK

$1,794

+57%Pop. 128,026

Broken Arrow, OK

$1,189

+4%Pop. 113,540

Edmond, OK

$1,821

+59%Pop. 94,054

Lawton, OK

$1,694

+48%Pop. 89,015

Moore, OK

$1,745

+53%Pop. 62,105

Midwest City, OK

$1,762

+54%Pop. 57,503

Stillwater, OK

$1,719

+51%Pop. 50,210

Planning a Radon Mitigation System in Tulsa

A radon mitigation system typically doesn't require a permit in Tulsa, which simplifies planning. However, always confirm with the local building department before starting, especially for structural changes. Expect the project to take 4-8 hours to complete.

A radon mitigation system is a complex project best left to licensed professionals. In Tulsa, skilled contractors charge an average of $22.21/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

In Tulsa, where the median household income is $47,177, a $1,142 project requires careful budgeting. Look into home improvement loans, HELOC options, or local grants that may be available in Oklahoma.

Radon Mitigation System — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Tulsa

View labor rates, material costs, and project estimates for Tulsa, OK.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs