Radon Mitigation System in Sparks, NV — Costs $900 to $3,374
What does radon mitigation system cost in Sparks? Average $1,687, ranging $900–$3,374. Labor runs $34.62/hr locally — 12% above the national average. Free breakdown with material + labor split.
Sparks, NV Market
+12% vs nationalLabor Rate
$34.62/hr
Material Index
107
Avg Permit Cost
$1,721
Median Home Price
$398,712
Sparks is a mid-sized city in Nevada with a healthy pool of local contractors. Homeowners generally have several options to compare for a radon mitigation system, which helps keep pricing competitive. Costs in Sparks run slightly above the national average, though the gap is modest enough that smart material choices and timing can close it. The median home in Sparks is valued at $398,712, putting this project at about 0.4% of home value — a moderate investment with a projected 35% ROI.
Low Estimate
$900
National: $800
Mid-Range
$1,687
National: $1,500
High End
$3,374
National: $3,000
Per Sq Ft
$0
National: $0
Radon Mitigation System Cost Calculator for Sparks
Adjusted for Sparks's labor rate ($34.62/hr) and material costs (index 107).
Mid-grade materials, good quality fixtures, standard options.
Estimated Total in Sparks
$1,620
Based on 200 sq ft at mid quality, adjusted for Sparks market rates.
Local Cost Breakdown
At Sparks's average rate of $34.62/hr (15% above national avg)
Material cost index 107 (7% above national baseline of 100)
Radon Mitigation System vs. Home Value in Sparks
| Metric | Sparks | National Avg |
|---|---|---|
| Radon Mitigation System (Mid-Range) | $1,687 | $1,500 |
| Median Home Price | $398,712 | $350,000 |
| Project as % of Home Value | 0.4% | 0.4% |
| Estimated ROI | 35% | 35% |
| Median Household Income | $61,658 | $75,000 |
What Affects the Price in Sparks
- 1Local labor rates ($34.62/hr in Sparks)
- 2Material cost index (107 vs national 100)
- 3Number of suction points
- 4Fan size
- 5Pipe routing
- 6Basement vs slab foundation
Popular Upgrades
- Continuous monitor with alarm
- Sealed sump pit lid
- Fan diagnostic gauge
Other Projects in Sparks, NV
Whole House Generator Installation
$16,617
HVAC System Replacement
$13,243
Whole House Plumbing Repiping
$11,246
Spray Foam Insulation
$8,930
Second Story Addition
$222,400
Accessory Dwelling Unit (ADU) Construction
$166,800
Room Addition
$100,080
Home Addition
$88,624
Radon Mitigation System in Other Nevada Cities
Planning a Radon Mitigation System in Sparks
A radon mitigation system typically doesn't require a permit in Sparks, which simplifies planning. However, always confirm with the local building department before starting, especially for structural changes. Expect the project to take 4-8 hours to complete.
A radon mitigation system is a complex project best left to licensed professionals. In Sparks, skilled contractors charge an average of $34.62/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.
For the median Sparks household earning $61,658/year, this project at $1,687 represents a significant investment. Consider financing options or phasing the work to spread costs over time.
Radon Mitigation System — National Guide
See the full national cost guide with DIY tips, cost factors, and ROI analysis.
All Construction Costs in Sparks
View labor rates, material costs, and project estimates for Sparks, NV.
Explore All Project Cost Guides
Compare costs across 120+ home improvement projects in 3,636 cities nationwide.
View All Project Costs