Radon Mitigation System in Santa Fe, NM — Costs $764 to $2,866
What does radon mitigation system cost in Santa Fe? Average $1,433, ranging $764–$2,866. Labor runs $28.9/hr locally — 4% below the national average. Free breakdown with material + labor split.
Santa Fe, NM Market
-4% vs nationalLabor Rate
$28.9/hr
Material Index
94
Avg Permit Cost
$2,041
Median Home Price
$353,519
In a smaller market like Santa Fe, New Mexico, the pool of contractors specializing in radon mitigation system may be more limited. Getting 3+ quotes is especially important to ensure fair pricing. Santa Fe offers slightly below-average renovation costs, giving homeowners a small cost advantage compared to most US markets. The median home in Santa Fe is valued at $353,519, putting this project at about 0.4% of home value — a moderate investment with a projected 35% ROI.
Low Estimate
$764
National: $800
Mid-Range
$1,433
National: $1,500
High End
$2,866
National: $3,000
Per Sq Ft
$0
National: $0
Radon Mitigation System Cost Calculator for Santa Fe
Adjusted for Santa Fe's labor rate ($28.9/hr) and material costs (index 94).
Mid-grade materials, good quality fixtures, standard options.
Estimated Total in Santa Fe
$1,376
Based on 200 sq ft at mid quality, adjusted for Santa Fe market rates.
Local Cost Breakdown
At Santa Fe's average rate of $28.9/hr (4% below national avg)
Material cost index 94 (6% below national baseline of 100)
Radon Mitigation System vs. Home Value in Santa Fe
| Metric | Santa Fe | National Avg |
|---|---|---|
| Radon Mitigation System (Mid-Range) | $1,433 | $1,500 |
| Median Home Price | $353,519 | $350,000 |
| Project as % of Home Value | 0.4% | 0.4% |
| Estimated ROI | 35% | 35% |
| Median Household Income | $73,417 | $75,000 |
What Affects the Price in Santa Fe
- 1Local labor rates ($28.9/hr in Santa Fe)
- 2Material cost index (94 vs national 100)
- 3Number of suction points
- 4Fan size
- 5Pipe routing
- 6Basement vs slab foundation
Popular Upgrades
- Continuous monitor with alarm
- Sealed sump pit lid
- Fan diagnostic gauge
Other Projects in Santa Fe, NM
Whole House Generator Installation
$14,258
HVAC System Replacement
$11,392
Whole House Plumbing Repiping
$9,552
Spray Foam Insulation
$7,623
Second Story Addition
$190,333
Accessory Dwelling Unit (ADU) Construction
$142,750
Room Addition
$85,650
Home Addition
$76,040
Radon Mitigation System in Other New Mexico Cities
Planning a Radon Mitigation System in Santa Fe
A radon mitigation system typically doesn't require a permit in Santa Fe, which simplifies planning. However, always confirm with the local building department before starting, especially for structural changes. Expect the project to take 4-8 hours to complete.
A radon mitigation system is a complex project best left to licensed professionals. In Santa Fe, skilled contractors charge an average of $28.9/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.
For the median Santa Fe household earning $73,417/year, this project at $1,433 represents a significant investment. Consider financing options or phasing the work to spread costs over time.
Radon Mitigation System — National Guide
See the full national cost guide with DIY tips, cost factors, and ROI analysis.
All Construction Costs in Santa Fe
View labor rates, material costs, and project estimates for Santa Fe, NM.
Explore All Project Cost Guides
Compare costs across 120+ home improvement projects in 3,636 cities nationwide.
View All Project Costs