How much does a radon mitigation system cost in Fresno, CA?

The average radon mitigation system in Fresno, CA costs $2,339 in 2026. Costs range from $1,248 for a basic project to $4,679 for a high-end renovation. Fresno is 56% more expensive than the national average of $1,500.

What is the labor rate for contractors in Fresno?

The average contractor labor rate in Fresno, CA is $49.69/hour, compared to the national average of $30/hour. For a radon mitigation system, labor typically accounts for 65% of the total cost, which is approximately $1,520 in Fresno.

Are materials more expensive in Fresno?

Fresno has a material cost index of 138 (national average = 100). Materials cost about 38% more than the national average. For a radon mitigation system, materials account for 35% of the cost, approximately $819.

Do I need a permit for a radon mitigation system in Fresno?

A radon mitigation system usually does not require a permit in most jurisdictions, though rules vary in Fresno, CA. Always verify with the local building department. The average permit cost in Fresno (when required) is $1,641.

Is a radon mitigation system a good investment in Fresno?

A radon mitigation system provides an estimated 35% ROI nationally. In Fresno, where the median home price is $595,629, this project costs about 0.4% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Radon Mitigation System in Fresno, CA — Costs $1,248 to $4,679

What does radon mitigation system cost in Fresno? Average $2,339, ranging $1,248–$4,679. Labor runs $49.69/hr locally — 56% above the national average. Free breakdown with material + labor split.

Fresno, CA Market

+56% vs national

Labor Rate

$49.69/hr

Material Index

138

Avg Permit Cost

$1,641

Median Home Price

$595,629

As one of the largest metros in California, Fresno has a competitive contractor market with hundreds of licensed professionals. This typically gives homeowners more leverage on pricing, though high demand for renovations can offset that advantage. At 56% above the national average, Fresno is one of the more expensive markets for home improvement — driven primarily by above-average labor rates in the region. With a median home price of $595,629, this radon mitigation system represents just 0.4% of typical home value — a relatively small investment that can significantly boost curb appeal or functionality.

Low Estimate

$1,248

National: $800

Mid-Range

$2,339

National: $1,500

High End

$4,679

National: $3,000

Per Sq Ft

National: $0

Duration: 4-8 hours

DIY: Hard

Permits: Not Required

ROI: 35%

Radon Mitigation System Cost Calculator for Fresno

Adjusted for Fresno's labor rate ($49.69/hr) and material costs (index 138).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Fresno

$2,245

Based on 200 sq ft at mid quality, adjusted for Fresno market rates.

Local Cost Breakdown

Labor (65%)$1,520

At Fresno's average rate of $49.69/hr (66% above national avg)

Materials (35%)$819

Material cost index 138 (38% above national baseline of 100)

Radon Mitigation System vs. Home Value in Fresno

Metric	Fresno	National Avg
Radon Mitigation System (Mid-Range)	$2,339	$1,500
Median Home Price	$595,629	$350,000
Project as % of Home Value	0.4%	0.4%
Estimated ROI	35%	35%
Median Household Income	$100,899	$75,000

What Affects the Price in Fresno

1Local labor rates ($49.69/hr in Fresno)
2Material cost index (138 vs national 100)
3Number of suction points
4Fan size
5Pipe routing
6Basement vs slab foundation

Popular Upgrades

Continuous monitor with alarm
Sealed sump pit lid
Fan diagnostic gauge

Other Projects in Fresno, CA

Whole House Generator Installation

$22,565

HardROI 55%

HVAC System Replacement

$17,886

HardROI 50%

Whole House Plumbing Repiping

$15,596

HardROI 45%

Spray Foam Insulation

$12,256

HardROI 60%

Second Story Addition

$303,633

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$227,725

HardROI 80%

Room Addition

$136,635

HardROI 55%

Home Addition

$120,348

MediumROI 60%

Radon Mitigation System in Other California Cities

Los Angeles, CA

$2,586

+11%Pop. 3,979,576

San Diego, CA

$2,574

+10%Pop. 1,424,116

San Jose, CA

$2,665

+14%Pop. 1,013,240

San Francisco, CA

$2,646

+13%Pop. 873,965

Sacramento, CA

$2,522

+8%Pop. 524,943

Long Beach, CA

$2,430

+4%Pop. 466,742

Oakland, CA

$2,564

+10%Pop. 433,031

Bakersfield, CA

$2,426

+4%Pop. 403,455

Planning a Radon Mitigation System in Fresno

A radon mitigation system typically doesn't require a permit in Fresno, which simplifies planning. However, always confirm with the local building department before starting, especially for structural changes. Expect the project to take 4-8 hours to complete.

A radon mitigation system is a complex project best left to licensed professionals. In Fresno, skilled contractors charge an average of $49.69/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

With a median household income of $100,899, many Fresno residents can budget for this project through savings. The mid-range cost of $2,339 represents 2% of the typical household's annual income.

Radon Mitigation System — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Fresno

View labor rates, material costs, and project estimates for Fresno, CA.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs