How much does a radon mitigation system cost in Austin, TX?

The average radon mitigation system in Austin, TX costs $1,551 in 2026. Costs range from $827 for a basic project to $3,103 for a high-end renovation. Austin is 3% more expensive than the national average of $1,500.

What is the labor rate for contractors in Austin?

The average contractor labor rate in Austin, TX is $31.42/hour, compared to the national average of $30/hour. For a radon mitigation system, labor typically accounts for 65% of the total cost, which is approximately $1,008 in Austin.

Are materials more expensive in Austin?

Austin has a material cost index of 101 (national average = 100). Materials cost about 1% more than the national average. For a radon mitigation system, materials account for 35% of the cost, approximately $543.

Do I need a permit for a radon mitigation system in Austin?

A radon mitigation system usually does not require a permit in most jurisdictions, though rules vary in Austin, TX. Always verify with the local building department. The average permit cost in Austin (when required) is $816.

Is a radon mitigation system a good investment in Austin?

A radon mitigation system provides an estimated 35% ROI nationally. In Austin, where the median home price is $246,719, this project costs about 0.6% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Radon Mitigation System in Austin, TX — Costs $827 to $3,103

What does radon mitigation system cost in Austin? Average $1,551, ranging $827–$3,103. Labor runs $31.42/hr locally — 3% above the national average. Free breakdown with material + labor split.

Austin, TX Market

+3% vs national

Labor Rate

$31.42/hr

Material Index

101

Avg Permit Cost

$816

Median Home Price

$246,719

As one of the largest metros in Texas, Austin has a competitive contractor market with hundreds of licensed professionals. This typically gives homeowners more leverage on pricing, though high demand for renovations can offset that advantage. Costs in Austin run slightly above the national average, though the gap is modest enough that smart material choices and timing can close it. At a median home price of $246,719, homeowners in Austin should weigh the project cost (0.6% of home value) carefully against expected returns to avoid over-improving for the local market.

Low Estimate

$827

National: $800

Mid-Range

$1,551

National: $1,500

High End

$3,103

National: $3,000

Per Sq Ft

National: $0

Duration: 4-8 hours

DIY: Hard

Permits: Not Required

ROI: 35%

Radon Mitigation System Cost Calculator for Austin

Adjusted for Austin's labor rate ($31.42/hr) and material costs (index 101).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Austin

$1,489

Based on 200 sq ft at mid quality, adjusted for Austin market rates.

Local Cost Breakdown

Labor (65%)$1,008

At Austin's average rate of $31.42/hr (5% above national avg)

Materials (35%)$543

Material cost index 101 (1% above national baseline of 100)

Radon Mitigation System vs. Home Value in Austin

Metric	Austin	National Avg
Radon Mitigation System (Mid-Range)	$1,551	$1,500
Median Home Price	$246,719	$350,000
Project as % of Home Value	0.6%	0.4%
Estimated ROI	35%	35%
Median Household Income	$53,168	$75,000

What Affects the Price in Austin

1Local labor rates ($31.42/hr in Austin)
2Material cost index (101 vs national 100)
3Number of suction points
4Fan size
5Pipe routing
6Basement vs slab foundation

Popular Upgrades

Continuous monitor with alarm
Sealed sump pit lid
Fan diagnostic gauge

Other Projects in Austin, TX

Whole House Generator Installation

$15,402

HardROI 55%

HVAC System Replacement

$12,299

HardROI 50%

Whole House Plumbing Repiping

$10,343

HardROI 45%

Spray Foam Insulation

$8,244

HardROI 60%

Second Story Addition

$205,733

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$154,300

HardROI 80%

Room Addition

$92,580

HardROI 55%

Home Addition

$82,144

MediumROI 60%

Radon Mitigation System in Other Texas Cities

Houston, TX

$1,735

+12%Pop. 2,304,580

San Antonio, TX

$1,533

-1%Pop. 1,547,253

Dallas, TX

$1,762

+14%Pop. 1,304,379

Fort Worth, TX

$1,652

+7%Pop. 918,915

El Paso, TX

$1,402

-10%Pop. 678,815

Arlington, TX

$1,317

-15%Pop. 394,266

Corpus Christi, TX

$1,453

-6%Pop. 317,863

Plano, TX

$1,355

-13%Pop. 288,061

Planning a Radon Mitigation System in Austin

A radon mitigation system typically doesn't require a permit in Austin, which simplifies planning. However, always confirm with the local building department before starting, especially for structural changes. Expect the project to take 4-8 hours to complete.

A radon mitigation system is a complex project best left to licensed professionals. In Austin, skilled contractors charge an average of $31.42/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

For the median Austin household earning $53,168/year, this project at $1,551 represents a significant investment. Consider financing options or phasing the work to spread costs over time.

Radon Mitigation System — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Austin

View labor rates, material costs, and project estimates for Austin, TX.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs