Insulation (Spray Foam) in Irving, TX — Costs $3,408 to $20,448
What does insulation (spray foam) cost in Irving? Average $9,088, ranging $3,408–$20,448. Labor runs $43.33/hr locally — 14% above the national average. Free breakdown with material + labor split.
Irving, TX Market
+14% vs nationalLabor Rate
$43.33/hr
Material Index
97
Avg Permit Cost
$2,266
Median Home Price
$280,000
Irving is a mid-sized city in Texas with a healthy pool of local contractors. Homeowners generally have several options to compare for a insulation (spray foam), which helps keep pricing competitive. Costs in Irving run slightly above the national average, though the gap is modest enough that smart material choices and timing can close it. The median home in Irving is valued at $280,000, putting this project at about 3.2% of home value — a moderate investment with a projected 70% ROI.
Low Estimate
$3,408
National: $3,000
Mid-Range
$9,088
National: $8,000
High End
$20,448
National: $18,000
Per Sq Ft
$0
National: $0
Insulation (Spray Foam) Cost Calculator for Irving
Adjusted for Irving's labor rate ($43.33/hr) and material costs (index 97).
Mid-grade materials, good quality fixtures, standard options.
Estimated Total in Irving
$8,724
Based on 200 sq ft at mid quality, adjusted for Irving market rates.
Local Cost Breakdown
At Irving's average rate of $43.33/hr (44% above national avg)
Material cost index 97 (3% below national baseline of 100)
Insulation (Spray Foam) vs. Home Value in Irving
| Metric | Irving | National Avg |
|---|---|---|
| Insulation (Spray Foam) (Mid-Range) | $9,088 | $8,000 |
| Median Home Price | $280,000 | $350,000 |
| Project as % of Home Value | 3.2% | 2.3% |
| Estimated ROI | 70% | 70% |
| Median Household Income | $56,000 | $75,000 |
What Affects the Price in Irving
- 1Local labor rates ($43.33/hr in Irving)
- 2Material cost index (97 vs national 100)
- 3Area size
- 4Foam type
- 5Existing insulation
- 6Access
Popular Upgrades
- Closed-cell foam
- Open-cell foam
- Hybrid system
Other Projects in Irving, TX
Attic Conversion
$67,699
Basement Finishing
$53,255
Basement Finishing
$42,251
Wine Cellar Construction
$36,215
Second Story Addition
$241,433
Accessory Dwelling Unit (ADU) Construction
$181,075
Room Addition
$108,645
Home Addition
$94,676
Insulation (Spray Foam) in Other Texas Cities
Planning a Insulation (Spray Foam) in Irving
Building permits are typically required for a insulation (spray foam) in Irving. The average permit fee in this area is $2,266, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 1-3 days from start to finish.
A insulation (spray foam) is a complex project best left to licensed professionals. In Irving, skilled contractors charge an average of $43.33/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.
For the median Irving household earning $56,000/year, this project at $9,088 represents a significant investment. Consider financing options or phasing the work to spread costs over time.
Insulation (Spray Foam) — National Guide
See the full national cost guide with DIY tips, cost factors, and ROI analysis.
All Construction Costs in Irving
View labor rates, material costs, and project estimates for Irving, TX.
Explore All Project Cost Guides
Compare costs across 120+ home improvement projects in 3,636 cities nationwide.
View All Project Costs