How much does a electrical panel upgrade cost in Irving, TX?

The average electrical panel upgrade in Irving, TX costs $5,208 in 2026. Costs range from $1,953 for a basic project to $11,718 for a high-end renovation. Irving is 30% more expensive than the national average of $4,000.

What is the labor rate for contractors in Irving?

The average contractor labor rate in Irving, TX is $43.33/hour, compared to the national average of $30/hour. For a electrical panel upgrade, labor typically accounts for 70% of the total cost, which is approximately $3,646 in Irving.

Are materials more expensive in Irving?

Irving has a material cost index of 97 (national average = 100). Materials cost about 3% less than the national average. For a electrical panel upgrade, materials account for 30% of the cost, approximately $1,562.

Do I need a permit for a electrical panel upgrade in Irving?

Yes, a electrical panel upgrade typically requires building permits in Irving, TX. The average permit cost in Irving is $2,266. Always confirm requirements with the Irving building department before starting work.

Is a electrical panel upgrade a good investment in Irving?

A electrical panel upgrade provides an estimated 45% ROI nationally. In Irving, where the median home price is $280,000, this project costs about 1.9% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Electrical Panel Upgrade in Irving, TX — Costs $1,953 to $11,718

What does electrical panel upgrade cost in Irving? Average $5,208, ranging $1,953–$11,718. Labor runs $43.33/hr locally — 30% above the national average. Free breakdown with material + labor split.

Irving, TX Market

+30% vs national

Labor Rate

$43.33/hr

Material Index

Avg Permit Cost

$2,266

Median Home Price

$280,000

Irving is a mid-sized city in Texas with a healthy pool of local contractors. Homeowners generally have several options to compare for a electrical panel upgrade, which helps keep pricing competitive. At 30% above the national average, Irving is one of the more expensive markets for home improvement — driven primarily by above-average labor rates in the region. The median home in Irving is valued at $280,000, putting this project at about 1.9% of home value — a moderate investment with a projected 45% ROI.

Low Estimate

$1,953

National: $1,500

Mid-Range

$5,208

National: $4,000

High End

$11,718

National: $9,000

Per Sq Ft

National: $0

Duration: 1-2 days

DIY: Hard

Permits: Required

ROI: 45%

Electrical Panel Upgrade Cost Calculator for Irving

Adjusted for Irving's labor rate ($43.33/hr) and material costs (index 97).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Irving

$5,000

Based on 200 sq ft at mid quality, adjusted for Irving market rates.

Local Cost Breakdown

Labor (70%)$3,646

At Irving's average rate of $43.33/hr (44% above national avg)

Materials (30%)$1,562

Material cost index 97 (3% below national baseline of 100)

Electrical Panel Upgrade vs. Home Value in Irving

Metric	Irving	National Avg
Electrical Panel Upgrade (Mid-Range)	$5,208	$4,000
Median Home Price	$280,000	$350,000
Project as % of Home Value	1.9%	1.1%
Estimated ROI	45%	45%
Median Household Income	$56,000	$75,000

What Affects the Price in Irving

1Local labor rates ($43.33/hr in Irving)
2Material cost index (97 vs national 100)
3Current panel amperage
4Upgrade to 200A vs 400A
5Number of circuits
6Local utility coordination

Popular Upgrades

200A service upgrade
Whole-house surge protector
EV charger circuit

Other Projects in Irving, TX

Whole House Generator Installation

$17,752

HardROI 55%

HVAC System Replacement

$13,917

HardROI 50%

Whole House Plumbing Repiping

$12,783

HardROI 45%

Spray Foam Insulation

$9,847

HardROI 60%

Second Story Addition

$241,433

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$181,075

HardROI 80%

Room Addition

$108,645

HardROI 55%

Home Addition

$94,676

MediumROI 60%

Electrical Panel Upgrade in Other Texas Cities

Houston, TX

$4,644

-11%Pop. 2,304,580

San Antonio, TX

$4,094

-21%Pop. 1,547,253

Dallas, TX

$4,718

-9%Pop. 1,304,379

Austin, TX

$4,145

-20%Pop. 978,908

Fort Worth, TX

$4,418

-15%Pop. 918,915

El Paso, TX

$3,739

-28%Pop. 678,815

Arlington, TX

$3,510

-33%Pop. 394,266

Corpus Christi, TX

$3,876

-26%Pop. 317,863

Planning a Electrical Panel Upgrade in Irving

Building permits are typically required for a electrical panel upgrade in Irving. The average permit fee in this area is $2,266, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 1-2 days from start to finish.

A electrical panel upgrade is a complex project best left to licensed professionals. In Irving, skilled contractors charge an average of $43.33/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

For the median Irving household earning $56,000/year, this project at $5,208 represents a significant investment. Consider financing options or phasing the work to spread costs over time.

Electrical Panel Upgrade — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Irving

View labor rates, material costs, and project estimates for Irving, TX.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs