How much does a ductwork replacement cost in Irving, TX?

The average ductwork replacement in Irving, TX costs $7,670 in 2026. Costs range from $2,557 for a basic project to $19,175 for a high-end renovation. Irving is 28% more expensive than the national average of $6,000.

What is the labor rate for contractors in Irving?

The average contractor labor rate in Irving, TX is $43.33/hour, compared to the national average of $30/hour. For a ductwork replacement, labor typically accounts for 65% of the total cost, which is approximately $4,986 in Irving.

Are materials more expensive in Irving?

Irving has a material cost index of 97 (national average = 100). Materials cost about 3% less than the national average. For a ductwork replacement, materials account for 35% of the cost, approximately $2,685.

Do I need a permit for a ductwork replacement in Irving?

Yes, a ductwork replacement typically requires building permits in Irving, TX. The average permit cost in Irving is $2,266. Always confirm requirements with the Irving building department before starting work.

Is a ductwork replacement a good investment in Irving?

A ductwork replacement provides an estimated 42% ROI nationally. In Irving, where the median home price is $280,000, this project costs about 2.7% of your home value. This is a small percentage of home value, making it a relatively low-risk improvement.

Ductwork Replacement in Irving, TX — Costs $2,557 to $19,175

What does ductwork replacement cost in Irving? Average $7,670, ranging $2,557–$19,175. Labor runs $43.33/hr locally — 28% above the national average. Free breakdown with material + labor split.

Irving, TX Market

+28% vs national

Labor Rate

$43.33/hr

Material Index

Avg Permit Cost

$2,266

Median Home Price

$280,000

Irving is a mid-sized city in Texas with a healthy pool of local contractors. Homeowners generally have several options to compare for a ductwork replacement, which helps keep pricing competitive. At 28% above the national average, Irving is one of the more expensive markets for home improvement — driven primarily by above-average labor rates in the region. The median home in Irving is valued at $280,000, putting this project at about 2.7% of home value — a moderate investment with a projected 42% ROI.

Low Estimate

$2,557

National: $2,000

Mid-Range

$7,670

National: $6,000

High End

$19,175

National: $15,000

Per Sq Ft

National: $0

Duration: 1-3 days

DIY: Hard

Permits: Required

ROI: 42%

Ductwork Replacement Cost Calculator for Irving

Adjusted for Irving's labor rate ($43.33/hr) and material costs (index 97).

Project Size: 200 sq ft

50 sq ft1,000 sq ft

Quality Level

Mid-grade materials, good quality fixtures, standard options.

Estimated Total in Irving

$7,363

Based on 200 sq ft at mid quality, adjusted for Irving market rates.

Local Cost Breakdown

Labor (65%)$4,986

At Irving's average rate of $43.33/hr (44% above national avg)

Materials (35%)$2,685

Material cost index 97 (3% below national baseline of 100)

Ductwork Replacement vs. Home Value in Irving

Metric	Irving	National Avg
Ductwork Replacement (Mid-Range)	$7,670	$6,000
Median Home Price	$280,000	$350,000
Project as % of Home Value	2.7%	1.7%
Estimated ROI	42%	42%
Median Household Income	$56,000	$75,000

What Affects the Price in Irving

1Local labor rates ($43.33/hr in Irving)
2Material cost index (97 vs national 100)
3Total linear footage
4Duct material (sheet metal vs flex)
5Insulation of new ducts
6Access difficulty

Popular Upgrades

Insulated rigid metal ducts
Aeroseal duct sealing
Zoned dampers

Other Projects in Irving, TX

Whole House Generator Installation

$17,752

HardROI 55%

HVAC System Replacement

$13,917

HardROI 50%

Whole House Plumbing Repiping

$12,783

HardROI 45%

Spray Foam Insulation

$9,847

HardROI 60%

Second Story Addition

$241,433

HardROI 60%

Accessory Dwelling Unit (ADU) Construction

$181,075

HardROI 80%

Room Addition

$108,645

HardROI 55%

Home Addition

$94,676

MediumROI 60%

Ductwork Replacement in Other Texas Cities

Houston, TX

$6,939

-10%Pop. 2,304,580

San Antonio, TX

$6,131

-20%Pop. 1,547,253

Dallas, TX

$7,047

-8%Pop. 1,304,379

Austin, TX

$6,206

-19%Pop. 978,908

Fort Worth, TX

$6,608

-14%Pop. 918,915

El Paso, TX

$5,606

-27%Pop. 678,815

Arlington, TX

$5,270

-31%Pop. 394,266

Corpus Christi, TX

$5,811

-24%Pop. 317,863

Planning a Ductwork Replacement in Irving

Building permits are typically required for a ductwork replacement in Irving. The average permit fee in this area is $2,266, though costs vary based on project scope. Permit fees in this market are above average — factor them into your total budget. Plan for 1-3 days from start to finish.

A ductwork replacement is a complex project best left to licensed professionals. In Irving, skilled contractors charge an average of $43.33/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.

For the median Irving household earning $56,000/year, this project at $7,670 represents a significant investment. Consider financing options or phasing the work to spread costs over time.

Ductwork Replacement — National Guide

See the full national cost guide with DIY tips, cost factors, and ROI analysis.

All Construction Costs in Irving

View labor rates, material costs, and project estimates for Irving, TX.

Explore All Project Cost Guides

Compare costs across 120+ home improvement projects in 3,636 cities nationwide.

View All Project Costs