Crown Molding Installation in Santa Fe, NM — Costs $478 to $5,738
What does crown molding installation cost in Santa Fe? Average $1,913, ranging $478–$5,738. Labor runs $28.9/hr locally — 4% below the national average. Free breakdown with material + labor split.
Santa Fe, NM Market
-4% vs nationalLabor Rate
$28.9/hr
Material Index
94
Avg Permit Cost
$2,041
Median Home Price
$353,519
In a smaller market like Santa Fe, New Mexico, the pool of contractors specializing in crown molding installation may be more limited. Getting 3+ quotes is especially important to ensure fair pricing. Santa Fe offers slightly below-average renovation costs, giving homeowners a small cost advantage compared to most US markets. The median home in Santa Fe is valued at $353,519, putting this project at about 0.5% of home value — a moderate investment with a projected 52% ROI.
Low Estimate
$478
National: $500
Mid-Range
$1,913
National: $2,000
High End
$5,738
National: $6,000
Per Sq Ft
$0
National: $0
Crown Molding Installation Cost Calculator for Santa Fe
Adjusted for Santa Fe's labor rate ($28.9/hr) and material costs (index 94).
Mid-grade materials, good quality fixtures, standard options.
Estimated Total in Santa Fe
$1,836
Based on 200 sq ft at mid quality, adjusted for Santa Fe market rates.
Local Cost Breakdown
At Santa Fe's average rate of $28.9/hr (4% below national avg)
Material cost index 94 (6% below national baseline of 100)
Crown Molding Installation vs. Home Value in Santa Fe
| Metric | Santa Fe | National Avg |
|---|---|---|
| Crown Molding Installation (Mid-Range) | $1,913 | $2,000 |
| Median Home Price | $353,519 | $350,000 |
| Project as % of Home Value | 0.5% | 0.6% |
| Estimated ROI | 52% | 52% |
| Median Household Income | $73,417 | $75,000 |
What Affects the Price in Santa Fe
- 1Local labor rates ($28.9/hr in Santa Fe)
- 2Material cost index (94 vs national 100)
- 3Linear footage
- 4Profile height and complexity
- 5Material (MDF, wood, polyurethane)
- 6Ceiling height
Popular Upgrades
- Built-up crown molding
- Coffered ceiling
- Picture rail molding
Other Projects in Santa Fe, NM
Attic Conversion
$52,406
Basement Finishing
$42,773
Basement Finishing
$33,308
Home Theater / Media Room Build
$23,733
Second Story Addition
$190,333
Accessory Dwelling Unit (ADU) Construction
$142,750
Room Addition
$85,650
Home Addition
$76,040
Crown Molding Installation in Other New Mexico Cities
Planning a Crown Molding Installation in Santa Fe
A crown molding installation typically doesn't require a permit in Santa Fe, which simplifies planning. However, always confirm with the local building department before starting, especially for structural changes. Expect the project to take 1-3 days to complete.
A crown molding installation is a complex project best left to licensed professionals. In Santa Fe, skilled contractors charge an average of $28.9/hr, and the specialized nature of this work means cutting corners on labor can lead to costly rework.
For the median Santa Fe household earning $73,417/year, this project at $1,913 represents a significant investment. Consider financing options or phasing the work to spread costs over time.
Crown Molding Installation — National Guide
See the full national cost guide with DIY tips, cost factors, and ROI analysis.
All Construction Costs in Santa Fe
View labor rates, material costs, and project estimates for Santa Fe, NM.
Explore All Project Cost Guides
Compare costs across 120+ home improvement projects in 3,636 cities nationwide.
View All Project Costs